The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

Non-point sources and the waste discharge charge system.

The development of a waste discharge charge system (WDCS) in South Africa has been proposed to promote waste reduction and water conservation. The WDCS is based on the polluter pays principle and is designed such that the management of waste discharges achieves resource quality objectives (RQOs) at the minimum total cost to the catchment. Two charges are distinguished: first a charge for optimising use of the resource (incentive charge); and secondly, a charge for development and operation of mitigation measures in the resource (mitigation charge). The WDCS is applied to both point sources and non-point sources (NPS) of contamination. In the inclusion of NPS, the charge system distinguishes between registered and non-registered NPS, with the charge applied to the former group only, in the first instance. This paper introduces the WDCS by describing the principles and the theoretical basis of the WDCS, highlighting the link to RQOs as the benchmark of acceptable externalities. The paper explores the inclusion of NPS in the WDCS, describing: first, the principles of NPS inclusion in the WDCS; secondly, the types of NPS included in the present version of the WDCS; thirdly, the methodology for charge estimation; and finally, non-registered NPS and their potential inclusion in future editions of the WDCS. The paper concludes with remarks and challenges facing the first edition of the WDCS.     

Flood risk mapping at European scale.

The aim of this article is to illustrate a framework for flood risk mapping at pan-European scale produced by the Weather-Driven Natural Hazards (WDNH) action of the EC-JRC-IES. Early results are presented in the form of flood risk index maps. We assess several flood risk factors that contribute to the occurrence of flood disasters. Among the causal factors of a flood disaster one is triggering a natural event in the form of extreme precipitation and consequently extreme river discharge and extreme flood water levels. The threatening natural event represents the hazard component in our assessment. Furthermore exposure and vulnerability are anthropogenic factors that contribute also to flood risk. In the proposed approach, flood risk is considered on the light of exposure, vulnerability and hazard. We use a methodology with a marked territorial approach for the assessment of the flood risk. Hence, based on mathematical calculations, risk is the product of hazard, exposure and vulnerability. Improvements on datasets availability and spatial scale are foreseen in the next phases of this study. This study is also a contribution to the discussion about the need for communication tools between the natural hazard scientific community and the political and decision making players in this field.     

A comparison of the radiation vulnerabilities of ring resonator andinterferometric fiber optic gyroscopes

A comparison is made between passive ring-resonator and interferometric fiber-optic gyroscope sensitivity to the radiation darkening of optical fibers. The radiation degradation factor for each type of gyroscope is developed, and figures of merit are given for comparing gyroscopes independently of the specific mechanization or modulation scheme used. It is shown that for most practical situations, interferometric gyros offer superior performance in radiation environments     

An Approximate Model of Multistage Automatic Transfer Lines with Possible Scrapping Of Workpieces

We consider multistage automatic transfer lines with unreliable stages, finite interstage buffer storages, and possible scrapping of workpieces. It is assumed that the first stage never idles and the last stage never becomes blocked. Assuming that uptimes and downtimes of a stage are geometrically distributed, an approximate model is developed to compute different performance measures of the transfer line. The results obtained through the approximate model are compared to the exact results for three-stage transfer lines and to simulation results for longer transfer lines. It is observed that the approximate results are good in almost all cases considered.     

Aggregation of Induction Motor Loads for Transient Stability Studies

This study investigates the dynamic representation of a group of induction motors by one or more equivalent motors. The unknown parameters of the equivalent are estimated through a weighted-least-squares procedure. Verification of simulated results with experimental ones suggests that a fifth order dynamic model of the aggregate with a ninth order parameter model is appropriate. The least squares technique was found to provide good convergence characteristics subject to satisfaction of the following conditions good initial estimate of the parameters, proper selection of acceleration factors and homogenity of the motor group.     

Survey of natural radiation in France

Survey of natural radiation is conducted in France since 1981, with the assessment of the components resulting from external sources (ground and building materials) using thermoluminescent dosemeters. In addition, the internal exposure to Rn-222 and the potential alpha energy due to radon daughters, are estimated by passive track detectors in the first case and active dosemeters in the second one. This paper presents the French program methods and results with an analysis and discussion of the observed levels.     

Wind flow patterns about buildings

A knowledge of building wake characteristics is useful in a variety of applications including dispersion of pollutants downwind of conventional or nuclear power plants, airport runway interference effect, take-off/landing limitations at heliports, pedestrian wind comfort, and wind loads on structures. Recent investigations have advanced both understanding of physical flow processes occurring in the near and far wake regions and theoretical predictive capability for flow and diffusion in the far wake region. These studies have shown, for example, that separation cavities immediately downwind are not enclosed by free streamlines as in two-dimensional separation/reattachment, that organized vortices can play an important role in wake development, and that theoretical solutions for some wake regions are possible.     

Interactive anatomy online

The scientific community and general public can best take advantage of the benefits of 3D digital reconstructions if they are stored in a Web-accessible, easy-to-access database. We describe MorphologyNet/sup /spl copy// a Web-based digital library of realistic, 3D interactive and customizable images of anatomy currently in development at the University of Missouri-Rolla.