Contributions of the interior and surface states of charge carriers to the emission spectra of CdS quantum dots in borosilicate glasses

The photoluminescence spectra of CdS quantum dots grown in a borosilicate glass by sol-gel technology are recorded and analyzed. It is shown that the photoluminescence spectra of the samples are related to annihilation of free (interior) excitons in the ground state and excited state. Emission associated with the surface states of the quantum dots is detected in the region around 2.7 eV for the first time. The emission is due to recombination of electrons localized at the surface with heavy holes in the free states of the quantum dots. Resonance excitation of the structures makes it possible to reveal the specific features of the localized surface states responsible for the photoluminescence band. The properties of the band are, to a large extent, similar to the properties of the emission bands of both three-dimensional media (amorphous semiconductors and substitution alloys) and two-dimensional systems (quantum wells and superlattices).     

Electrical characteristics of the ITO/HgInTe photodiodes

Photodiodes designed to be sensitive in the region 0.5–1.7 μm and obtained by vacuum magnetron sputtering of the ITO (SnO₂ + In₂O₃) layer on the surface of the Hg₃In₂Te₆ single crystal are studied. The electrical characteristics, measured at 265–333 K, indicate that the mechanism of charge transport in the diodes under study is thermionic. The current-voltage characteristic and its temperature variations are described quantitatively based on the energy diagram and the found parameters of the heterojunction. Original Russian Text ? L.A. Kosyachenko, I.M. Rarenko, E.F. Sklyarchuk, I.I. German, Sun Weiguo, 2006, published in Fizika i Tekhnika Poluprovodnikov, 2006, Vol. 40, No. 5, pp. 568–571.     

A process-dependent real-time controller for sequencing batch reactor plants: results of full-scale operation.

This paper presents results of a research project, in which a process-dependent real-time control (RTC) strategy for a sequencing batch reactor plant was realised in full-scale. The cycle controller is based on NH4 analysers, NO3 probes, TSS probes and sludge level probes. With this new RTC strategy it was possible to increase the treatment capacity by 50%. By implementation of the new controller the TN, TP and NH4-N treatment efficiency could be improved significantly, too. The treatment efficiency concerning COD is comparable.     

Sandia National Laboratories Validation Workshop: Structural dynamics application

This article specifies a virtual structural dynamic subsystem and some systems, as well as mathematical models that approximately simulate them. The purpose is to define a setting for model validations conceived by participants in the Sandia National Laboratories Validation Workshop. Some broad guidelines for the model validations are set, as well as a regulatory requirement to be satisfied by the target system. Participants are directed to present techniques for subsystem model validation, to analytically predict whether or not the regulatory requirement will be met, and to estimate the likelihood of accuracy of the prediction.     

A simple technique to minimize heat damage to specimens during thermal polymerization of LR White in plastic and gelatin capsules

London Resin (LR) White is a commonly used resin for embedding specimens to be used for immuno- and/or cytochemical studies. In some instances, due to either the properties of the specimen or the availability of various reagents and equipment, it becomes necessary and/or more convenient to polymerize LR White using heat rather than chemical accelerators or UV light. It is known, however, that heat can reduce or even eliminate the anti genicity of the tissue being embedded. It is therefore desirable to polymerize specimens at the lowest temperature possible and to remove the specimens from the oven as soon as polymerization is complete. We have developed a technique that provides a visual marker that allows the exothermic polymerization of LR White to be monitored, thus minimizing the amount of time a specimen must stay in the oven while excluding oxygen from capsules of polymerizing LR White.     

Thomson scattering diagnostic systems in the ITER divertor

A diagnostic array has been developed for studying the operating modes of the divertor in the ITER tokamak-reactor using the Thomson scattering technique. The aim of this study is to measure the spatial profiles of the electron temperature and density. The structure of the diagnostic setup was selected on the basis of a classical diagnostic geometry and the high-resolution LIDAR system, which provide access to different regions of the divertor plasma. A severe radiation environment, limited access to the plasma in the ITER divertor, and a high-dust environment (the divertor plate erosion material) in the divertor volume pose many problems for performing diagnostics under unique conditions having no analogs in the tokamaks that are now in operation. Different methods for protecting optical surfaces from plasma-enriched deposition are proposed and analyzed. The efficiency of these methods has been demonstrated in bench tests. The concept of laser and detector systems and diffraction polychromators capable of operating at different electron temperatures with a lower limit of 1 eV, has been justified and approved.     

Lean philosophy: implementation in a forging company

This research addresses the implementation of lean philosophy in a forging company with a focus on radial forging production flow lines. Here, the prime motive is to evolve and test several strategies to eliminate waste on the shop floor. In this research, a systematic approach is suggested for the implementation of lean principles. This paper describes an application of value stream mapping (VSM). Consequently, the present and future states of value stream maps are constructed to improve the production process by identifying waste and its sources. Furthermore, Taguchi’s method of design of experiments is pursued here to minimize the forging defects produced due to imperfect operating conditions. A noticeable reduction in set-up time and work-in-process (WIP) inventory level is substantiated. Finally, we conclude with a discussion of managerial implications and the future scope of research.     

An efficient electron-beam-pumped semiconductor laser for the green spectral range based on II–VI multilayer nanostructures

Emission characteristics of an electron-beam-pumped Cd(Zn)Se/ZnMgSSe semiconductor laser are studied. The laser’s active region consists of a set of ten equidistant ZnSe quantum wells containing fractional-monolayer CdSe quantum-dot inserts and a waveguide formed by a short-period superlattice with the net thickness of ～0.65 μm. Lasing occurs at room temperature at a wavelength of 542 nm. Pulsed power as high as 12 W per cavity face and an unprecedentedly high efficiency of ～8.5% are attained for the electron-beam energy of 23 keV.     

Finger assignment schemes for RAKE receivers with multiple-way soft handover

We propose and analyze new finger assignment techniques that are applicable for RAKE receivers in the soft handover (SHO) region. Specifically, extending the results for the case of two-base station (BS), we consider the multi-BS situation, attack the statistics of several correlated generalized selection combining (GSC) stages, and provide closed-form expressions for the statistics of the output signal-to-noise ratio (SNR). By investigating the tradeoff among the error performance, the average number of required path estimations/comparisons, and the SHO overhead, we show through numerical examples that the new schemes offer commensurate performance in comparison with more complicated GSC-based diversity systems while requiring a smaller estimation load and SHO overhead.     

Structural and Superconducting Property Variations with Nominal Mg Non‐Stoichiometry in MgxB2 and Its Enhancement of Upper Critical Field

By applying a combination of characterisation tools, changes in structural and superconducting properties with nominal Mg non‐stoichiometry in Mg_xB₂ are found. The non‐stoichiometry produces enhanced in‐field critical current densities (J_c's) and upper critical field / irreversibility field (H_c2/H_irr(T)) values. Upper critical fields of ～ 21 T (4.2 K) were obtained in nominal Mg‐deficient samples compared to ～ 17 T (4.2 K) for near‐stoichiometric samples.