A contribution to the study of some greek marbles

The use of marble in Architecture began on the 7th century B.C. and continued to be used without stop untill today. Greece and especially the East Macedonia region is an extremely privileged area on marble deposits both in quantities and qualities and colours. In the present work the main physical and engineering properties of some varieties of greek marbles are given and a comparison with the international standards is made. The experimental material (marbles) was from East Macedonia, Argolida-Arcadia and Magnessia, three of the biggest marble deposit areas in Greece. From the results obtained, it is concluded that the marbles examined satisfy all the international standard codes and thus they can be used as building stones and decoration materials.     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.     

Stress-Strain State of Weak Saturated Clay Beds of Embankments

Results are presented for laboratory and field tests of weak saturated soils serving as beds for embankments in Ho Chi Min City and various regions of the Mekong River Delta (Vietnam). A method is outlined for quantitative evaluation of the stress-strain state (SSS) of the weak saturated clayey beds (plane problem). A method is described for quantitative evaluation of the deformation and stability of weak beds in the initial, intermediate, and stabilized stages of the formation and transformation of the SSS. __________ Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 2–6, September–October, 2005.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.     

Energy and environmental comparison of three variants of a family house during its whole life span

The aim of this study is to analyse and compare three variants of a family house in order to evaluate the total environmental impacts produced during the whole building life cycle. The first variant corresponds to the standard in force in Switzerland, the second alternative to the requirements of a quality control label for houses with low energy consumption and the third case is a very low energy consumption building. The three variants have the same architectural aspect but different insulation thicknesses and types, different energy production systems and the use of different renewable energies. The calculation of the environmental impacts is carried out by means of a life cycle analysis, which includes not only the impact related to the energy consumption during the occupancy stage, but also the materials manufacture, transport, replacement and elimination at the end of the building lifetime. The results are expressed with the Swiss and the UCTE (Union for the Co-ordination of Transmission of Electricity) electricity mix to analyse how they influence the building impact.