Hydrogen limitation--a method for controlling the performance of membrane biofilm reactor for autotrophic denitrification of wastewater.

Hydrogen-driven denitrification using the fiber membrane biofilm reactor (MBfR) was evaluated for consistent operation in tertiary wastewater treatment. The possibility of controlling the process rates, as well as biofilm parameters by supplying limited amounts of electron donor (hydrogen), was tested. Limiting the hydrogen supply proved to be efficient in controlling the biofilm growth and performance of the MBfR. Denitrification rates remained unchanged for both synthetic wastewater (SWW) and real municipal wastewater (MWW) effluent as well through the fluctuations in the substrate (NO3-N) concentration. The average denitrification rates were 0.50 (+/- 0.02) g NO3-N per day per m2 for SWW and 0.59 (+/- 0.04) g NO3-N per day per m2 for MWW. Biofilm density rather than thickness was the determining factor in substrate diffusion and biofilm sloughing, ultimately determining operating stability. Limited hydrogen supply assured constant volatile solids (VS) concentration in the biofilm. It was determined that VS/TS ratio higher than 0.25 assured stable biofilm operation. Decrease of VS/TS ratio below 0.25 led to shearing of the nonbiological outer layers of the biofilm. The values of chemical oxygen demand (COD), volatile suspended solids (VSS) and total suspended solids (TSS) in the final effluent were stable and well below wastewater effluent guidelines. Substitutions of bicarbonate with gaseous carbon dioxide as the carbon source did not affect denitrification rates despite lower than optimum pH conditions.     

Enhance Cyanide Recovery by UsingAir‐Sparged Hydrocyclone

Human health and environmental concerns dictate that industrial processes be improved or replaced. Recovery or recycling is an important activity that allows cyanide residue from the industrial processes to be re‐used, reducing its production cost and disposal problems. In this regard, the air‐sparged hydrocyclone (ASH) has been used as a reactor for the treatment of cyanide solutions for cyanide recycling by acidification/volatilization using the Mexican modification of the Mills‐Crowe process. Aqueous cyanide‐ion concentration can be reduced from 250 ppm to below 20 ppm in the ASH with recoveries greater than 80 % in a single stage.     

Examining pre-adoption interest in online innovations: an exploratory study of e-service personalization in the public sector

In order to better understand why public organizations develop interest in online innovations, this paper develops a revised model of technological innovation with an emphasis on socio-technical factors associated with electronic service delivery. This model focuses on three primary dimensions of online innovation: perceived need, technical capacity, and risk mitigation. It is hypothesized that these three dimensions will have the greatest influence on the development of pre-adoption interest in a new online innovation. This model is then used to examine a single online innovation, personalization of online government information and services. Data from a survey of local governments is used to test the theory. A regression model was estimated from the survey data. Results suggest that perceived need, financial costs, and the ability to mitigate the risks associated with privacy issues each influence the level of interest in personalized online services. The results suggest that public organizations must find reliable means of determining external demand for online innovations, as well as reducing the risks associated with each specific type of online innovation prior to adoption.     

A kinetic model for the acid-oxygen pressure leaching of Ni–Cu matte

A semi-empirical mathematical model for the acid-oxygen pressure leaching of Ni–Cu matte is presented, based on data from batch leaching experiments. The primary controlling factor in the leaching process is found to be galvanic inhibition of the more highly oxidized copper and nickel sulfide species by less oxidized species, particularly Ni alloy and Ni₃S₂. The leaching rate of many species is greatly reduced by the presence of one or both of these phases, and others will not commence leaching until neither is present. The mathematical model is based on first-order chemical reaction controlled rate expressions, as the reactions occurring are electrochemical in nature. Mass transfer effects are included only empirically. Some possibly diffusion-related phenomena are noted, although the model is not extended to incorporate these effects on a fundamental level. The model is verified and extended by the inclusion of several different factors that were tested experimentally. The effects of variations in O₂ flow rate and partial pressure, initial particle size, reaction pulp density and initial acid concentration were all studied, and included in the model. Variations in O₂ flow rate and partial pressure are found to affect the reaction rates via the dissolved oxygen concentration in the solution phase.     

Presenting information on the small-screen interface: effects of table formatting

This study explored strengths and limitations of table formatting choices by engaging twenty-eight participants in information searches in online tables, presented on a small-screen interface (Palm IIIc). Table length across conditions was held constant at three screens long (24 rows total) but varied from one to three screens wide (approximately 35, 70, and 105 characters per line). Target information was positioned in either the upper left, lower left, upper right, or lower right quadrants. Data collected were time on task, error rate, and level of participants' confidence in their answers. Experimenters found that increased horizontal scrolling imposed the heaviest burden on information search. This study supports restricting table widths to one screen on handheld computers. If necessary, however, tables can go to two screens wide without critical detriment to usability. While ruled line formatting is slightly better than interface character in providing visual support for the burden of horizontal scrolling, neither formatting option adequately compensates for the added burden.     

Post-Event Rumination and Negative Self-Appraisal in Social Phobia Before and After Treatment.

This study investigated the relationship between self-appraisals of performance, symptom severity and post-event rumination in social phobia, and evaluated the effect of treatment on these variables. A socially phobic group and a nonanxious control group performed an impromptu speech and were told that their performance would be evaluated. Participants appraised their performance immediately after the speech and 1 week later, and the frequency of post-event rumination during the week following the speech was assessed. The socially phobic group maintained the negative appraisals of their speech over the week, whereas the nonclinical group showed increased positivity about their performance The socially phobic group also engaged in more negative rumination than controls. Treatment improved perceptions of performance and reduced negative rumination. These results are discussed in the light of cognitive models of social phobia. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Microrheology as a tool for high-throughput screening

Microrheology can be used for high-throughput screening of the rheological properties of sample libraries of complex fluids. Two passive techniques are particularly suitable: video microscopy and diffusing-wave spectroscopy. The techniques complement each other very well and can be applied to samples that offer different experimental challenges. We offer a thorough analysis of the strengths and limitations of microrheology with the emphasis on high-throughput applications. To illustrate the potential of microrheology, results are presented for two representative cases: the rheological screening of aqueous solutions of a block copolypeptide library and the rheological phase diagram of a water/surfactant/salt system.     

Thermal aging of plasticized PVC. I. Weight loss kinetics in the PVC—didecylphtalate system

Weight-loss kinetics were studied for 10 industrial extruded samples of poly(vinyl chloride) (PVC) plasticized by 20–30% by weight of didecylphtalate at 85, 95, 105, 110, and 120deg;C. For the most unstable samples, which contained a light coplasticizer, the weight-loss rate obeyed Fick's law. In the other cases, it was constant in the early period of exposure. The apparent Arrhenius parameters (i.e., preexponential factor and activation energy) were intercorrelated and varied strongly from one sample to another. This was explained by the existence of two distinct kinetic regimes corresponding, respectively, to diffusion or evaporation, the whole process being controlled by the slowest step, and a transition between both regimes occurring in the temperature range of exposure. In the proposed model, small changes of the preexponential factor of diffusion from one sample to another are sufficient to take into account the observed behavior.     

Assuring software quality assurance

The term quality assurance (or QA) has a variety of interpretations. The most common one is that it ensures that developers, testers, or independent auditors have performed some form of scrutiny on a system to validate that it will work as required. Software quality assurance is similar but applies to the code or noncode artifacts.