傅立叶变换在虚拟仪器LabVIE中的应用

文中介绍了LabVIEW环境下用NI公司高级分析库里的信号处理工具包的Real FFT.vi傅立叶变换,采用此种方法对某型飞机起落架液压测试系统采样信号进行频谱分析,实验证明其效果良好.     

Ignition of nickel in environments containing oxygen and chlorine

The mixed oxidation of nickel in gases containing both oxygen and chlorine has been investigated using the techniques of thermogravimetric analysis and examination of the corrosion products by scanning electron microscopy. Two regimes of corrosion behavior have been detected: one in which a protective oxide film is present and the rate of corrosion is controlled by the transport of the volatile products of the reaction between the gas phase and the oxide, and one in which the protective film is penetrated and corrosion occurs rapidly enough to result in the ignition of the specimen. The oxide corrosion products on the specimens after corrosion have characteristic morphologies, with the products of volatilization type corrosion consisting of large grains and the products of ignition type attack consisting of fine spherical particles. Ignition is a serious hazard in environments containing 0.25 pct or more Cl₂ and 4 pct or more O₂ by volume at temperatures between 1000 K and 1100 K, but is not produced by exposures at higher temperatures. A model based on the stability of the protective film in steady state corrosion is presented which can be used to predict the transition from volatilization to ignition type attack.     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

Empirical efficiency and volume relationships for HPGe detectors

We have extended the empirical work of Vano et al.[1] relating the slope of the detector efficiency curve to the active volume for Ge detectors. The analysis was carried out using Monte Carlo techniques and covered a wide range of incident energies (200 keV-20 MeV) and active volumes (19.6 cm³–396 cm³). It is shown that the expression of Vano et al.[1] is only valid over the energy range 200 keV-3 MeV for active volumes <50 cm³. The upper bound decreases to 2 MeV for volumes of a few hundred cm³. The usable energy range can, however, be extended to 6 MeV by introducing higher order terms into the polynomial. Above this energy, the shape of the efficiency curve is better described by a non-linear function since linear forms fail simultaneously to fit large active volumes and high energies. We therefore propose a composite function which reduces to the form given in Vano et al. in the low energy/active volume limit. By comparison with the Monte Carlo results, it is estimated that relative efficiencies can be calculated to within 6% over the energy range 200 keV-20 MeV and active volumes 20 cm³–400 cm³. Since the largest errors occur for the smallest volumes, we recommend that for energies <3 MeV a two-fold approach be followed, i.e. using the expression of Vano et al.[1] for active volumes less than 50 cm³ and the proposed non-linear form for larger volumes. For high energy work (E > 3 MeV), we advocate the non-linear form. In this way, average errors can be kept 3%. Finally, we point out that the real power of the expression of Vano et al. lies not in predicting efficiencies, but active volumes.     

剂量率对聚四氟乙烯辐射裂解的影响

本文研究了在以电子加速器的电子射线为辐射源时,剂量率对PTFE辐射裂解的影响。在剂量相同的条件下,剂量率从1.44×10~4 rad/s增至5.75×10~4 rad/s,裂解效率提高3.3倍。剂量率和各断裂参数(单位剂量裂解度a_0,G(s)值等)均成线性关系。当裂解度一定时,剂量率与剂量成反变关系。     

Induction of immune tolerance with heart-thymus composite allotransplantation in rats

Objective To study on the role of thymus transplantation for heart allograft in rats. Methods Vascularized heart-thymus combined transplantation was performed with microsurgical technique. Graft survival, histopathology, level of IL-2, IL-4 and its mRNA expression in serum and cardiac grafts were investigated. Results Heart-thymus combined transplantation achieved effect in the prolongation of cardiac graft survival with short-term administration of cyclosporine. Conclusions Vascularized thymus transplantation induced immune tolerance in thymectomized rats.     

Scattering of plane SH-waves by a cylindrical canyon of arbitrary shape in anisotropic media

The scattering and diffraction of plane SH-waves, by an arbitrary-shaped cylindrical canyon in anisotropic media is formulated here. Analytical solutions are obtained via the complex function theory, using the orthogonal property of the Hermite functions to solve the resulting set of infinite algebraic equations. Expressions for scattered displacements and scattered stresses are given. Three cross-sectional profile types are used in the numerical simulation of the two-dimensional canyon topography: (a) a semi-circular profile, (b) a semi-elliptical profile and (c) a triangular profile. The results obtained in (a) and (b) are consistent with known solutions computed by Trifunac and his co-workers [1,3] using a different method. As the exact solution for (c) is not known to exist, the result given here is believed to be new and would therefore serve as a useful check for numerical analysts working in this area.