A novel distributed approach to robust fault detection and identification

In this paper, we propose a novel distributed robust fault detection and identification (RFDI) scheme for a class of nonlinear systems. Firstly, a detection and identification estimator—robust fault tracking approximator (RFTA) is designed for online health monitoring. A novel feature of the RFTA is that it can simultaneously detect and accurately identify the shape and magnitude of the fault and disturbance. Moreover, it takes less online training time compared with the traditional neural network based fault diagnosis schemes. For some distributed systems, a network of distributed estimators is constructed where the RFTA is embedded into each estimator. Then we use consensus filter to filter the outputs of each estimator. One of the most important merits of the consensus filter is that its outputs can dramatically improve the accuracy of fault detection and identification. Next, the stability of the distributed RFDI scheme is rigorously investigated. Finally, two numerical examples are given to illustrate the feasibility and effectiveness of the proposed approach.     

PVC树脂聚合用有机过氧化物引发剂

介绍了目前国内外引发剂的使用及开发方向,并对引发剂的选择及其对树脂质量的影响进行了讨论。     

In‐Situ Observation of the Formation of MnS during Solidification of High Sulphur Steels

A Confocal Scanning Laser Microscope equipped with a gold image furnace was used to directly observe the precipitation of MnS during solidification of high sulphur steels under isothermal conditions in the temperature region 1440 to 1480°C on the free surface of the steel melt. For the case of Al‐killed steels, below 1480°C MnS particles were found to precipitate with Fe forming simultaneously around them. This MnS containing structure continued to grow rapidly (264 μm/s) as a surface film. The film gradually changed, as the level of S in the melt decreased, into a eutectic structure (with lamella spacing of 2 μm) as predicted by thermodynamics. In Si‐ killed steels there was significantly lower tendency to form MnS both in terms of time until precipitation occurred and growth rate.     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

一种动态开关电容运算放大器共模负反馈电路

本文主要介绍了一种应用于Cascode结构运放中的开关电容共模负反馈电路，它具有稳定性好、对运放频率特性影响小、不消耗额外功率等优点。对电路运用Hspice进行了模拟，并给出了模拟结果。     

A wavelet-based multisensor data fusion algorithm

This paper presents a wavelet transform-based data fusion algorithm for multisensor systems. With this algorithm, the optimum estimate of a measurand can be obtained in terms of minimum mean square error (MMSE). The variance of the optimum estimate is not only smaller than that of each observation sequence but also smaller than the arithmetic average estimate. To implement this algorithm, the variance of each observation sequence is estimated using the wavelet transform, and the optimum weighting factor to each observation is obtained accordingly. Since the variance of each observation sequence is estimated only from its most recent data of a predetermined length, the algorithm is self-adaptive. This algorithm is applicable to both static and dynamic systems including time-invariant and time-varying processes. The effectiveness of the algorithm is demonstrated using a piecewise-smooth signal and an actual time-varying flow signal.     

生产系统的计算机仿真研究

生产系统在设计与运行过程中面临着诸多的问题需要解决，计算机仿真技术作为一种有效验证生产系统设计合理性和辅助生产管理决策的手段，近年来在我国得到了越来越广泛的关注。该文系统总结了计算机仿真技术对生产系统的重要作用，利用Ithink5.0软件建立了简单生产过程的计算机仿真模型并进行了分析。     

4-(2-噻唑偶氮)-5-二甲氨基苯胺与铑(Ⅲ)显色反应研究及其应用

研究了显色剂 4 ( 2 噻唑偶氮 ) 5 二甲氨基苯胺 (简称TADMA)与铑 的显色反应。结果表明 ,在 pH3 2～ 4 8范围内 ,铑 与TADMA反应形成 1∶2红色络合物 ,加入无机酸后色泽加深 ,络合物的表观摩尔吸光系数为 1 2 1× 10 5,铑质量浓度在 0～ 0 92 μg/mL范围内服从比尔定律。本方法操作简便 ,灵敏度高 ,选择性好 ,常见金属离子在一定范围内无干扰 ,用于催化剂中微量铑的测定 ,结果满意     

基于B/S模式矿山管理信息系统构建技术研究

在全面分析以往矿山管理信息特点的基础上，提出了基于B／S模式开发矿山信息系统的思路。对基于B／S模式开发矿山信息系统的关键技术及开发步骤进行了详细的介绍。     

对单位工程竣工验收资料核查要点的探讨

针对竣工资料核查工作中遇到的一些常见和普遍存在的问题进行了分析、探讨，指出单位工程竣工资料的核查应以核查基建程序资料、综合管理资料及质量保证资料为重点。