N皇后问题独立解算法研究和仿真实现

根据N皇后可行解的七种对称关系,提出求N皇后问题独立解的算法,并验证算法的可行性和正确性。建立求解N皇后问题的仿真软件,验证N皇后问题全解和独立解个数约8:1的数学关系。     

供水管网中压力真实值的批次平差算法

分析了测压点优化布置的意义及原则,并根据供水周期性,依靠数量有限的测压点压力数据,结合管网的水力计算,利用传统的平差原理,将测压点以外的其它节点压力进行真实性校正,推算出了管网各节点的真实压力值,实现了通过有限测压点数据对管网所有节点压力的全面了解。     

一种改进性能自适应ICA算法研究

研究高动态环境必须实时自适应追踪混合矩阵的变化,快速浮点独立成分分析(Fast-ICA)算法,可以达到快速收敛.依据梯度在线学习算法性能更好,但是它的缺点是收敛慢,并且依赖适当的收敛算子的选择.为解决上述问题,提出了一种依据梯度优化块自适应ICA算法(GBOBA/ICA),包含Fast-ICA和依据梯度在线学习两种算法...     

An optimized image watermarking algorithm based on SVD and IWT

The Journal of Supercomputing - With the wide spread of image information, it is an urgent problem to protect image property rights and crack down on piracy. Watermarking algorithm is an effective...     

Determination of the acidic properties of carboxylated carbocatalysts in an acid-catalyzed ring-opening reaction using kinetic profiling

The acid-catalyzed ring-opening reaction of styrene oxide was used as a probe reaction for evaluating the acidic properties of carboxylated carbocatalysts. Significant discrepancies in the initial reaction rates were normalized using the total number of carboxyl groups, and demonstrated that the average catalytic activities of the carboxyl moieties on the carbocatalysts differed. Comparisons between the apparent activation energy E _a and the pre-exponential factor A, derived from Arrhenius analysis, demonstrated that A varied more significantly, and therefore had a more significant effect on the reaction rates than E _a. The variation in the calculated pKa values of the carboxyl groups was attributed to the electronic effects of the nitro groups. This hypothesis was supported by the temperature programmed desorption profiles of nitrogen monoxide ions.

Open image in new window

     

热处理非晶态Ni-P合金镀层的晶化过程

运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态NiP合金镀层在20℃/min加热速率下的热效应和质量变化。在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征。结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好。     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window