CVD growth and characterization of 3C-SiC thin films

Cubic silicon carbide (3C-SiC) thin films were grown on (100) and (111) Si substrates by CVD technique using hexamethyldisilane (HMDS) as the source material in a resistance heated furnace. HMDS was used as the single source for both Si and C though propane was available for the preliminary carbonization. For selective epitaxial growth, patterned Si (100) substrates were used. The effect of different growth parameters such as substrate orientation, growth temperature, precursor concentration, etc on growth was examined to improve the film quality. The surface morphology, microstructure and crystallinity of grown films were studied using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis and X-ray photoelectron spectroscopy (XPS).     

Effectiveness of Cognitive-Behavioral Treatment for Panic Disorder Versus Treatment as Usual in a Managed Care Setting.

Eighty clients enrolled in a managed care health plan who identified panic disorder as their primary presenting problem were randomly assigned to treatment by a therapist recently trained in a manual-based empirically supported psychotherapy (M. G. Craske, E. Meadows, & D. H. Barlow, 1994) or a therapist conducting treatment as usual (TAU). Participants in both conditions showed significant change from pre- to posttreatment on a number of measures. Those receiving panic control therapy (PCT) showed greater levels of change than those receiving TAU. Among treatment completers, an average of 42.9% of those in PCT and 18.8% in TAU achieved clinically significant change across measures. The results are discussed with reference to the dissemination of PCT and other evidence-based psychotherapies to clinical practice settings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparison of land surface emissivity and radiometric temperature derived from MODIS and ASTER sensors

This study compared surface emissivity and radiometric temperature retrievals derived from data collected with the MODerate resolution Imaging Spectroradiometer (MODIS) and Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) sensors, onboard the NASA's Earth Observation System (EOS)-TERRA satellite. Two study sites were selected: a semi-arid area located in northern Chihuahuan desert, USA, and a Savannah landscape located in central Africa. Atmospheric corrections were performed using the MODTRAN 4 atmospheric radiative transfer code along with atmospheric profiles generated by the National Center for Environmental Predictions (NCEP). Atmospheric radiative properties were derived from MODTRAN 4 calculations according to the sensor swaths, which yielded different strategies from one sensor to the other. The MODIS estimates were then computed using a designed Temperature-Independent Spectral Indices of Emissivity (TISIE) method. The ASTER estimates were derived using the Temperature Emissivity Separation (TES) algorithm. The MODIS and ASTER radiometric temperature retrievals were in good agreement when the atmospheric corrections were similar, with differences lower than 0.9 K. The emissivity estimates were compared for MODIS/ASTER matching bands at 8.5 and 11 μm. It was shown that the retrievals agreed well, with RMSD ranging from 0.005 to 0.015, and biases ranging from −0.01 to 0.005. At 8.5 μm, the ranges of emissivities from both sensors were very similar. At 11 μm, however, the ranges of MODIS values were broader than those of the ASTER estimates. The larger MODIS values were ascribed to the gray body problem of the TES algorithm, whereas the lower MODIS values were not consistent with field references. Finally, we assessed the combined effects of spatial variability and sensor resolution. It was shown that for the study areas we considered, these effects were not critical.     

Identification of piecewise affine systems via mixed-integer programming

This paper addresses the problem of identification of hybrid dynamical systems, by focusing the attention on hinging hyperplanes and Wiener piecewise affine autoregressive exogenous models, in which the regressor space is partitioned into polyhedra with affine submodels for each polyhedron. In particular, we provide algorithms based on mixed-integer linear or quadratic programming which are guaranteed to converge to a global optimum. For the special case where the estimation data only seldom switches between the different submodels, we also suggest a way of trading off between optimality and complexity by using a change detection approach.     

Role of nanometer roughness on the adhesion and friction of a rough polymer surface and a molecularly smooth mica surface

Friction and adhesion measurements between surfaces of cross-linked, stiff polymers of varying roughness against smooth, bare mica surfaces were carried out in dry air as well as in the presence of lubricating oil. The nominal (macroscopic) contact area varies with the applied load according to the Johnson, Kendall and Roberts (JKR) theory, yet shows significant hysteresis due to the irreversibility arising from the loading/unloading curves of multiple asperities. Upon introducing the oil between the surfaces, the critical shear stress is reduced to zero due to the elimination of the adhesion force. However, the effect is less noticeable on the friction coefficient. Lastly, the effect of increasing the (RMS) roughness was greatest over the first few nanometers due to the diminution of the adhesion-controlled contribution to the friction, after which a further increase in roughness had less dramatic effects. A model is presented to account for the observed adhesion hysteresis during repeated loading/unloading cycles of purely elastically deforming rough surfaces. Bruno Zappone and Kenneth J. Rosenberg made equal contributions.     

Controlled microtribology of a metal oxide surface

The rational control of the friction and wear (damage) of engineering, as opposed to model, surfaces under practical conditions such as high contact pressures has long been a technological challenge with much fundamental interest. Lubricant fluids and physisorbed surfactant monolayers (boundary lubricants) are effective friction modifiers but often fail at high loads. We show that the chemisorption of a suitably designed single-chained phosphonate surfactant onto crystalline α-alumina surfaces produces robust protective monolayers that significantly reduce the friction forces and wear even at high loads. The mechanisms are explained, which point to some general principles that offer a basis for scale-up in many different engineering systems. This revised version was published online in June 2006 with corrections to the Cover Date.     

COBRA-STAR, a five frame point-projection x-ray imaging system for 1 MA scale wire-array Z pinches

A new imaging system for 1 MA scale wire-array Z-pinch experiments that produces up to five high-resolution x-ray images per experimental pulse has been developed. Calibrated areal density measurements of the Z-pinch plasma can be obtained from each pulse. The system substitutes five molybdenum (Mo) X pinches for the normal copper return-current conductors to provide point sources of x-rays for point-projection radiography. Each backlighting X pinch consists of four Mo wires, the x-ray burst timing of which was controlled by varying the wire diameter (mass) from 10.2 to 30 microm in the five X pinches. Typical images have a 16x8 mm2 field of view at the wire array and a magnification of about 6.5:1 on the x-ray-sensitive film. Titanium (Ti) filters in front of the films transmit continuum radiation in the spectral range of 3-5 keV. Inclusion on the Ti of a step wedge having known thickness increments of the same material as the wires enables the calibrated areal density measurements to be made of the exploding wire plasmas. Here, we used tungsten (W) step wedges with step thicknesses ranging from 0.015 to 1.1 microm to obtain accurate (+/-10%) areal density measurements of W plasmas from the spatial profile of film exposure. When imaging arrays that produce intense radiation pulses, a plastic monofilament "quencher" is placed on axis to avoid film saturation. Images have subnanosecond temporal resolution and about 7 microm spatial resolution.     

Designing on-site: Facilitating participatory contextual architecture with mobile phones

Some movements within modern architecture particularly emphasise the importance of matching buildings to their surroundings. However, practicing such “contextual architecture” is highly challenging and typically not something the future inhabitants of a building are well equipped for participating in. This paper explores the potentials of using mobile phone technology for facilitating such client participation in the parts of an architecture process that take place on the building site. For this we introduce ArchiLens, a mobile system for interactive on-site 3D visualisation of houses, and findings from a field study with 40 participants in the process of building or modifying their home. The study showed that using the system helped evoke people’s imagination of the look and feel of their future house, and envision it in context. This enabled them to participate more closely in the design process on-site by iteratively reviewing design alternatives and exploring, for example, other placements and materials.     

Hide-n-Sense: Preserving Privacy Efficiently in Wireless mHealth

As healthcare in many countries faces an aging population and rising costs, mobile sensing technologies promise a new opportunity. Using mobile health (mHealth) sensing, which uses medical sensors to collect data about the patients, and mobile phones to act as a gateway between sensors and electronic health record systems, caregivers can continuously monitor the patients and deliver better care. Furthermore, individuals can become better engaged in monitoring and managing their own health. Although some work on mHealth sensing has addressed security, achieving strong privacy for low-power sensors remains a challenge. We make three contributions. First, we propose an mHealth sensing protocol that provides strong security and privacy properties at the link layer, with low energy overhead, suitable for low-power sensors. The protocol uses three novel techniques: adaptive security, to dynamically modify transmission overhead; MAC striping, to make forgery difficult even for small-sized Message Authentication Codes; and asymmetric resource requirements, in recognition of the limited resources in tiny mHealth sensors. Second, we demonstrate its feasibility by implementing a prototype on a Chronos wrist device, and evaluating it experimentally. Third, we provide a security, privacy, and energy analysis of our system.