Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.     

Revisiting Statistical Design and Analysis in Scientific Research

Statistics is essential to design experiments and interpret experimental results. Inappropriate use of the statistical analysis, however, often leads to a wrong conclusion. This concept article revisits basic concepts of statistics and provides a brief guideline of applying the statistical analysis for scientific research from designing experiments to analyzing and presenting the data.     

An adaptive load balancing management technique for RFID middleware systems

In recent years, Radio Frequency Identification (RFID) industries have taken a great interest in utilizing the benefits of RFID for supply chain management, inventory control and various other applications. This paper proposed an adaptive load balancing technique for RFID middleware systems to meet the demands of scalability and heterogeneity. First, we explored five basic load balancing policies, namely, information policy, job selection policy, transfer policy, initiation policy and location policy. Eighteen load balancing schemes were then proposed for RFID middleware systems that were combinations of various types of the five basic load balancing policies. Our empirical study suggested that these load balancing strategies performed differently under different workload statuses. Finally, an adaptive load balancing strategy was proposed. The load balancing schemes and the proposed adaptive load balancing strategy have been implemented in the RFID Middleware Load Management System (RM‐LMS). Copyright © 2010 John Wiley & Sons, Ltd.     

Memory effects of all‐solution‐processed oxide thin‐film transistors using ZnO nanoparticles

Abstract— Non‐volatile memory effects of an all‐solution‐processed oxide thin‐film transistor (TFT) with ZnO nanoparticles (NPs) as the charge‐trapping layer are reported. The device was fabricated by using a soluble MgInZnO active channel on a ZrHfO^x gate dielectric. ZnO NPs were used as the charge‐trapping site at the gate‐insulator—channel interface, and Al was used for source and drain electrodes. Transfer characteristics of the device showed a large clockwise hysteresis, which can be used to demonstrate its memory function due to electron trapping in the ZnO NP charge‐trapping layer. This memory effect has the potential to be utilized as a memory application on displays and disposable electronics.     

A new vertical‐alignment LC mode with high‐transmittance and fast‐response‐time features

Abstract— A novel pixel design for vertical‐alignment LCDs with superior transmittance has been developed. The new liquid‐crystal mode, refered to as the hole‐induced vertical‐alignment mode (Hi‐VA), uses a via hole of an organic layer on a TFT substrate to achieve multi‐domain alignment. Compared to the conventional design, the Hi‐VA mode has a transmittance of up to 135% with a contrast ratio of 2000:1. Moreover, the new structure is free from ITO patterning or protrusion on the color‐filter side, which makes the fabrication process simple and low cost.     

Synthesis and characterization of novel blue azo‐dye derivatives containing acrylate group for dye‐based color filters

Abstract— Even though dyes have a fine resolution and good chromaticities, they are not widely used as coloring materials for color filters (CFs) due to their low thermal stability and chemical resistance. A series of azo‐dye derivatives, which consist of two cross‐linkable acrylate or methacrylate groups to improve thermal and chemical properties, have been synthesized and used to fabricate color filters. The spectral properties and chemical/thermal stabilities of the fabricated CFs were investigated by comparing dye‐based CFs, without a complicated dispersion process, but with pigment‐based CFs using dispersed pigment. Also, more properties including the development test and surface morphologies lithographic properties were studied. The synthesized azo dyes were characterized by elemental analysis, UV‐visible spectra, IR, mass, and ¹H‐NMR spectra.     

Device reliability under electrical stress and photo response of oxide TFTs

Abstract— The stability of oxide TFTs has been the main focus of this research and is probably the most crucial requirement for the successful application to flat‐panel displays. Although the high Fermi level of oxide semiconductors makes TFTs basically stable under electrical stress, the device reliability under diverse variations of electrical stress is affected by materials such as active semiconductors and gate insulators, processes for the formation of back/front channels and passivation layers, and device configurations among other things. How these factors affect the device reliability have been investigated and a review of the stability is presented. In addition, several categories of the light instability of oxide TFTs is presented and the origin is discussed.     

Integral floating‐image display using two lenses with reduced distortion and enhanced depth

Abstract— An integral floating display (IFD) with a long depth range without floating lens distortion is proposed. Two lenses were used to reduce barrel distortion of the floating lens and three‐dimensional (3‐D) image deformation from object‐dependent longitudinal and lateral magnifications in the floating‐display system, combined with an integral imaging display. The distance between the floating lenses is the sum of their focal lengths. In the proposed configuration, lateral and longitudinal magnifications are constant regardless of the distance of the integrated 3‐D images, so the distortions from the distant‐dependent magnifications of the floating lens do not occur with the proposed method. In addition, the proposed floating system expands the depth range of the integral imaging display. As a result, the display can show a correct 3‐D floating image with a large depth range. Experimental results demonstrate that the proposed method successfully displays a 3‐D image without floating lens distortions across a large depth range.     

360°‐viewable cylindrical integral imaging system using a 3‐D/2‐D switchable and flexible backlight

Abstract— A 360°‐viewable cylindrical three‐dimensional (3‐D) display system based on integral imaging has been implemented. The proposed system is composed of a cylindrically arranged electroluminescent (EL) pinhole film, an EL film backlight, a barrier structure, and a transmission‐type flexible display panel. The cylindrically arranged point‐light‐source array, which is generated by the EL pinhole film reconstructs 360°‐viewable virtual 3‐D images at the center of the cylinder. In addition, the proposed system provides 3‐D/2‐D convertibility using the switching of EL pinhole film from a point light source to a surface light source. In this paper, the principle of operation, analysis of the viewing parameters, and the experimental results are presented.