Annealing behavior of Ar ion irradiated Bi2Sr2Can-1CunO4+2n superlattice and intergrowth films

Artificially layered Bi₂Sr₂Ca_n–1Cu_nO_4+n films were synthesized by sequential sputter deposition of BiO, SrCu_0.5O_1.5 and CaCuO₂ layers. Annealing behavior of these films which were irradiated by Ar ions was studied. Defect assisted improvement of their crystalline perfection is expected which might results in the improvement of the superconducting properties of these films. An artificial film, such as an intergrowth of 2223 and 2234 phases, and superstructure films of (2245)₁(2201)₁ and (2234)₁(2212)₁, were irradiated by Ar ions (150 keV, 2–10×10¹² ions/cm₂) and annealed at 730 °C. An improvement of superconducting transition temperatures were observed.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Hydride Vapor Phase Epitaxy of GaN Thick Films by the Consecutive Deposition Process Using GaCl3

GaN buffer and main layers were grown by the conventional hydride vapor phase epitaxy technique using GaCl₃ consecutively. The deposited buffer layers were investigated by atomic force microscopy and X-ray analysis. To examine the behavior of the buffer layers at main layer growth temperature, heat treatment was conducted at 900°C. Based on the results of the buffer layer study, GaN thick films were grown at 1050°C. Optimum deposition conditions of buffer layer from the buffer and main layer studies generally coincided. On the φ scanning pattern, the GaN films grown on (0001) Al₂O₃ were single-crystalline. Band-edge emission dominated photoluminescence was observed at room temperature.     

Substrate transport and cocaine binding of human dopamine transporter is reduced by substitution of carboxyl tail with that of bovine dopamine transporter

A chimeric dopamine transporter (DAT) cDNA encoding mutant human DAT (hDAT) protein in which the intracellular carboxyl-terminal tail is replaced by that of the bovine dopamine transporter (bDAT) was constructed. The chimeric hDAT cDNA was expressed in COS-7 cells, and [3H]dopamine and [3H]MPP+ uptake and [3H]CFT binding capacities were assessed. Substrate transport and ligand binding of bDAT were reduced by 32-43% as a result of substitution of the carboxyl tail in hDAT, suggesting that the functional characteristics of bDAT arise from differences in the carboxyl tail between human and bovine DAT. Thus, it appears that the sequences encoded within the carboxyl terminal of DAT would be one of the important determinants for its functions.     

Regulation of tyrosine hydroxylase and aromatic L-amino acid decarboxylase by dopaminergic drugs

We provide evidence that dopamine receptors differentially modulate tyrosine hydroxylase and aromatic L-amino acid decarboxylase in the mouse striatum. The dopamine D1 receptor family (D1-like) antagonist, R(+)-7-chloro-8-hydroxy-3-methyl-1-phenyl-2,3,4,5-tetrahydro-1 H-3-benazepine (SCH 23390), elevated aromatic L-amino acid decarboxylase activity and protein content in striatum, as well as the mRNA for the enzyme in midbrain. The dopamine D1-like receptor agonist, (+/-)-1-phenyl-2,3,4,5-tetrahydro-(1 H)-3-benzazepine-7,8-diol (SKF 38393), had no effect on aromatic L-amino acid decarboxylase. The dopamine D1-like drugs had no effect on tyrosine hydroxylase. In contrast, the dopamine D2 receptor family (D2-like) antagonists haloperidol and spiperone elevated both tyrosine hydroxylase and aromatic L-amino acid decarboxylase activities. The increase in aromatic L-amino acid decarboxylase activity was accompanied by elevated enzyme protein content but not mRNA. The dopamine D2-like receptor agonists, bromocriptine, quinpirole and (+/-)-7-hydroxydipropylaminotetralin (7-OH-DPAT), all decreased striatal tyrosine hydroxylase. Under the conditions used, bromocriptine and 7-OH-DPAT, but not quinpirole, decreased aromatic L-amino acid decarboxylase activity of striatum. Both the dopamine D1- and D2-like receptor antagonists enhanced the turnover of striatal dopamine to differing degrees, as judged by the ratio of acid metabolites of dopamine to dopamine. Taken together our results indicate that aromatic L-amino acid decarboxylase can be modulated independently of tyrosine hydroxylase.     

Cross-phase-modulation-induced nonlinear phase noise in WDM direct-detection DPSK systems

In direct-detection differential-phase-shift-keying (DPSK) systems, the signal-spontaneous emission beat noise introduces phase noise due to Kerr nonlinearity. In wavelength-division-multiplexed (WDM) systems, this nonlinear phase noise comes not only from the channel itself through self-phase modulation (SPM) but also from the other channels through cross-phase modulation (XPM). In this paper, we theoretically and experimentally investigate XPM-induced nonlinear phase noise. We calculate the performance degradation of DPSK systems caused by XPM-induced nonlinear phase noise in addition to SPM-induced phase noise and experimentally verify it using a 600-km nonzero-dispersion-shifted-fiber link.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

Proton and hydrogen formation by cyclohexyl benzene during overcharge of Li-ion batteries

This study provides experimental evidence for proton and hydrogen formation caused by the anodic electropolymerization of cyclohexyl benzene (CHB), which is a popular electrolyte additive for overcharge protection of lithium-ion batteries (LIBs). It is found that considerable H₂ evolution is observed in overcharged LiCoO₂/graphite cells, especially when CHB is included as an electrolyte additive. In order to confirm the proton generation during the CHB oxidation, Pt/Pt-rotating ring disc electrode (RRDE) measurements are performed in 1 M Li(C₂F₅SO₂)₂N ethylene carbonate/ethyl methyl carbonate (1/2, v/v) solutions with and without CHB. The cathodic ring current is intimately correlated to the anodic disc current, and the cathodic reaction at the ring is determined to be the reduction of the proton. The proton generation efficiency during the CHB oxidation is as high as 90%. Proton liberation is also observed during the anodic decomposition of the electrolyte solvents, although it occurs in a much less stoichiometric way compared with that during the CHB oxidation.     

Scaffolded writing and rewriting in the discipline: A web-based reciprocal peer review system

This paper describes how SWoRD (scaffolded writing and rewriting in the discipline), a web-based reciprocal peer review system, supports writing practice, particularly for large content courses in which writing is considered critical but not feasibly included. To help students gain content knowledge as well as writing and reviewing skills, SWoRD supports the whole cycle of writing, reviews, back-reviews, and rewriting by scaffolding the journal publication process as its authentic practice model. In addition, SWoRD includes algorithms that compute individual reviewer’s review accuracy, which is in turn used to support the various drawbacks of reciprocal peer reviews (e.g., variation in motivation or ability of reviewers). Finally, this paper describes an empirical evaluation showing that the SWoRD approach is effective in improving writing quality in content classes.     

Modeling low-frequency electrode-type resistivity tools in invadedthin beds

The authors formulate and implement a numerical mode-matching (NMM) method to model electrode-type resistivity tools in invaded thin beds. The authors derive the low-frequency approximation of the Maxwell's equations to obtain the partial differential equation for the potential field. The new NMM program is validated by comparing the numerical results with those obtained from other dc programs. It is found that this new program is much faster than the program using the finite-element method (FEM), and hence is useful for routine interpretation of resistivity logs and for inversion