Effect of temperature on polymer migration II: Concentration equation

Polymer migration is a generally well-known phenomenon in a flow field, and it has been verified that the sources of such phenomena are nonhomogeneity of the flow, concentration effects and hydrodynamic interactions between the polymer molecules. In addition, temperature effects were found to be another source of polymer migration. The Langevin equation for a polymer molecule was first derived from single chain dynamics using a kinetic theory for the bead-spring elastic harmonic dumbbell model, as described in part I (reference [1]). In this paper the diffusion equation and concentration profile of the polymer molecules induced by a temperature gradient are obtained from the Fokker-Planck equation. A new differential operator is also introduced to calculate the concentration profile. From the concentration equation obtained in the general flow geometry, we find that in dilute polymer solution there are significant effects on the polymer migration not only due to the nonhomogeneity of the flow field but also due to temperature gradients.     

Creep and drying shrinkage of calcium silicate pastes IV. Effects of accelerated curing

The dependent deformations and evidence of structural changes were measured on pastes of C₃S containing CaCl₂, and on pastes of C₃S or a C₃S/C₂S blend cured at 65°C. It was concluded that the addition of CaCl₂ enhances the role of the “pore component” in controlling irreversible strains even when well-hydrated pastes are dried. The formation of ore stable CSH at 65°C can explain the reduction in time-dependent deformations observed for these pastes. Even though a change in pore size distribution occurs at 65°C, it is not considered to affect irreversible strains in well-hydrated pastes.     

Phase Relationships in the ZrO2-Sc2O3 and ZrO2-In2O3 Systems

Zirconia-rich subsolidus phase relationships in the ZrO₂–Sc₂O₃ and ZrO₂–In₂O₃ systems were investigated. Phase inconsistencies in the ZrO₂–Sc₂O₃ system resulted from a diffusionless cubic-to-tetragonal ( t' ) phase transformation not being recognized in the past. Through three different measuring techniques, along with microstructural observations, the solubility limits of the tetragonal and cubic phases were determined.     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

A Non-Line-of-Sight mitigation localization algorithm for sensor networks using clustering analysis

Non-Line-of-Sight propagation of wireless signal has an impact on measured distances in range-based localization and will bias the final localization results. A new localization algorithm is proposed in this paper to mitigate Non-Line-of-Sight errors when there are more than enough anchor nodes deployed around the node to be located. This algorithm utilizes multi-round clustering analysis to filter the pre-located estimators which derive from all possible subsets of measured distances. In each round, the method density-based spatial clustering of applications with noise is adopted. Simulations show that the proposed algorithm can effectively improve localization accuracy not only when the measured distances with Non-Line-of-Sight error are minor but also under the condition that all of them suffer random Non-Line-of-Sight error.     

Telerobot-enabled HUB-CI model for collaborative lifecycle management of design and prototyping

The HUB-CI model is investigated in a telerobotic system in a client/server network to manage the lifecycle of engineering design and prototyping. The purpose of this platform is to support collaborative engineering design and proof of concept to enhance distributed team collaboration and resource utilization. The suggested platform is exemplified in two collaboration support tools and a physical prototyping platform. Structured Co-Insight Management is developed to support innovative idea exchanges and the consensus decision-making during the design process. Conflict/error detection management helps preventing conflicts and errors during the lifecycle of design and development. Physical collaboration over the network occurs when a team controls the telerobot operation during prototyping and testing in design cycles. A pilot system is implemented with a group project for the design of an electronic circuit (including both hardware and software designs). The functional assessment method is used to compare this platform to other collaborative design tools. The system presented offers unique qualitative advantages as an integrated collaboration support system.     

Analysis of deformation processes in glassy polycarbonate using internal friction measurements during a tensile test

Internal friction has been measured by torsion at 1 Hz during tensile tests performed on glassy polycarbonate at room-temperature. Steady-state flow and transient effects have been studied during continuous tensile tests and strain-rate changes. During steady-state, internal friction and flow-stress vary in a similar way with strain-rate. But during transients, internal friction varies continuously while flow-stress passes through a maximum (or a minimum). These results are interpreted assuming that non-elastic deformation of glassy polymers requires some microscopic discontinuous processes such as motion of defects. Two parameters are considered: the velocity v and the density ρ of mobile defects. Assuming that the former is directly related to the flow stress, it has been shown that internal friction is related to the density of mobile defects ρ. This feature is used to interpret the different stages of a tensile test curve. Activation volumes for both velocity and density of mobile defects are calculated from experimental data.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Interaction of CETP inhibitory peptide and lipoprotein substrates in cholesteryl ester transfer assay: relationship between association properties and inhibitory activities

In a previous study, CETP inhibitory peptide (3 kDa) was isolated from hog plasma. The peptide, synthesized chemically according to the amino acid sequence of the 3-kDa peptide (designated P₂₈), showed CETP inhibitory activity both in vitro and in vivo [Cho et al. (1998) Biochim. Biophys. Acta 1391, 133–144]. We report herein further unique features of P₂₈ when it was associated with the cholesteryl ester (CE)-donor and-acceptor lipoproteins. Lipoprotein substrates with P₂₈ present in both HDL (as a CE-donor) and LDL (as a CE-acceptor) served as poor substrates, with CE-transfer activity decreased up to 60% compared to normal substrates without P₂₈. P₂₈ was found to be located in HDL fractions of hog plasma and showed the same electromobility as that visualized by PAGE on 7% polyacrylamide gel under nondenaturing conditions. Addition of apolipoprotein A-1 (apoA-1) or apoB antibody to a normal CE-transfer mixture did not alter CE-transfer activity. However, addition of apoA-1 or −B antibody to a CETP-inhibition mixture decreased the inhibitory activity of P₂₈ by ca. 20%. Western blot analysis revealed that P₂₈ was associated only with human and hog HDL among several lipoproteins purified from human, hog, and rabbit. CFTP-inhibition assays with various lipoprotein substrates revealed that P₂₈ exhibited substrate-specific inhibitory activity. The inhibitory activity of P₂₈ was highly dependent on the type of lipoprotein substrate (whether CE-donor or-acceptor); P₂₈ inhibited CE transfer from HDL to LDL, but it did not inhibit CE transfer from HDL to HDL.