Metalorganic Chemical Vapor Deposition of CdTe(133) Epilayers on Si(211) Substrates

Single-crystalline CdTe(133) films have been grown by metalorganic chemical vapor deposition on Si(211) substrates. We studied the effect of various growth parameters on the surface morphology and structural quality of CdTe films. Proper oxide removal from the Si substrate is considered to be the principal factor that influences both the morphology and epitaxial quality of the CdTe films. In order to obtain single-crystalline CdTe(133) films, a two-stage growth method was used, i.e., a low-temperature buffer layer step and a high- temperature growth step. Even when the low-temperature buffer layer shows polycrystalline structure, the overgrown layer shows single-crystalline structure. During the subsequent high-temperature growth, two-dimensional crystallites grow faster than other, randomly distributed crystallites in the buffer layer. This is because the capturing of adatoms by steps occurs more easily due to increased adatom mobility. From the viewpoint of crystallographic orientation, it is assumed that the surface structure of Si(211) consists of (111) terrace and (100) step planes with an interplanar angle of 54.8°. This surface structure may provide many preferable nucleation sites for adatoms compared with nominally flat Si(100) or (111) surfaces. The surface morphology of the resulting films shows macroscopic rectangular-shaped terrace—step structures that are considered to be a (111) terrace with two {112} step planes directed toward 〈110〉.     

Influence of pad shape on self-alignment in electronic packaging

Anisotropic self-alignment of the noncircular pads is investigated to reduce the misalignment in electronic packaging, and the effects of the direction and length ratio of the noncircular pads are analyzed. The restoring forces of circular and noncircular pads are calculated numerically using the surface evolver and are compared with the experimental data. The restoring force in the minor-axis direction of the noncircular pad becomes largest followed by the circular pad and the major-axis direction of the noncircular pad. Directionality increases with the length ratio, which implies that more accurate alignment can be achieved in the specific direction.     

TiN and TaN diffusion barriers in copper interconnect technology: Towards a consistent testing methodology

The present status of work on diffussion barriers for copper in multilevel interconnects is surveyed briefly, with particular emphasis on TiN and TaN, and silicon dioxide as the interlayer dielectric. New results are presented for these materials, combining thermal annealing and bias temperature stress testing. With both stress methods, various testing conditions are compared using capacitance-vs-voltage (C-V) and leakage current-vs-voltage (I-V) measurements to characterize the stressed samples. From an evaluation of these data and a comparison with other testing approaches, conditions for a consistent testing methodology of barrier reliability are outlined.     

Fiber-optic sensor array based on Sagnac interferometer with stablephase bias

We propose and experimentally demonstrate a novel fiber sensor array based on a Sagnac interferometer with very simple electronic signal processing. A stable quadrature phase bias was obtained using a phase modulator, and the polarization-induced signal fading was suppressed by using a depolarizer and a broad-band source. A phase sensitivity of about 4.0 μrad_rms/√Hz at 5 kHz was obtained using a two-sensor array     

Fabrication of laser-annealed poly-TFT by forming aSi1-xGex thermal barrier

Germanium is ion-implanted deeply into the bottom of a Si film before excimer laser annealing begins. During the solidification step, the implanted Ges form a high thermal resistive Si_1-xGe_x alloy, which reduces the thermal extraction rate of laser energy and the grain growth rate. Laterally larger but double-stacked grains were achieved with a higher Ge implant dose and a slower grain growth. The performance of fabricated poly-TFTs has been enhanced with a Ge 5×10¹⁵/cm² at 80 keV implant but deteriorated at a higher dose. We attribute this enhancement to a laterally enlarged grain and show that the performance of TFT is deteriorated more dominantly by other Ge-related factors than by surface roughening and Ge-induced defect creation     

A 1.8-GHz self-calibrated phase-locked loop with precise I/Qmatching

This paper describes a 1.8-GHz self-calibrated phase-locked loop (PLL) implemented in 0.35-μm CMOS technology. The PLL operates as an edge-combining type fractional-N frequency synthesizer using multiphase clock signals from a ring-type voltage-controlled oscillator (VCO). A self-calibration circuit in the PLL continuously adjusts delay mismatches among delay cells in the ring oscillator, eliminating the fractional spur commonly found in an edge-combing fractional divider due to the delay mismatches. With the calibration loop, the fractional spurs caused by the delay mismatches are reduced to -55 dBc, and the corresponding maximum phase offsets between the multiphase signals is less than 0.20. The frequency synthesizer PLL operates from 1.7 to 1.9 GHz and the closed-loop phase noise is -105 dBc/Hz at 100-kHz offset from the carrier. The overall circuit consumes 20 mA from a 3.0-V power supply     

Modal MRTD approaches for the efficient analysis of waveguidediscontinuities

This paper, the multi-resolution time-domain (MRTD) technique is applied to the waveguide discontinuity problem for fast-scattering parameter computation. To improve the computational efficiency, both three-dimensional (3-D) waveguide regions, including discontinuities, and one dimensional (1-D) homogeneous waveguide region, terminated with the modal absorbing boundary condition (ABC), are simulated in the wavelet domain with the mode composition/expansion algorithm from the modal analysis. A WG-90 rectangular waveguide with a thick asymmetric iris is analyzed and the numerical results are compared with conventional finite-difference time-domain (FDTD) results and mode-matching results     

A moving-actuator type electromechanical total artificial heart.II. Circular type and animal experiment

A new type of electromechanical total artificial heart (TAH) based on circular rolling-cylinder mechanism was developed to overcome critical problems in motor-driven artificial hearts such as large size and difficulties in fitting the heart to atrial remnants and arterial vessels. Its performance and reliability were evaluated in mock circulation and in an animal implant experiment. The total weight and volume of the pump is 650 g and 600 mL, respectively. This new pump was implanted in a calf for total heart replacement and 96 h of survival was achieved. The whole system, including pump, controller, and control algorithm performed well enough to improve the prospect of eventual clinical application of our TAH system.     

A Scheduling Framework for UWB & Cellular Networks

The max-min fair scheduling problem in wireless ad-hoc networks is a non-convex optimization problem. A general framework is presented for this optimization problem and analyzed to obtain a dual problem, which involves solving a series of optimization sub-problems. In the limit of infinite bandwidth ( ), the scheduling solution reduces to simultaneous transmission (spread spectrum) on all links (Negi and Rajeswaran, INFOCOM '04 (March 2004)). This motivates the analysis of the scheduling problem in the Ultra Wide Band (UWB) regime ( , but finite), a model for certain practical radios. A quadratic (in 1/W) lower bound to the single link capacity function is developed, which simplifies the dual sub-problem to a quadratic optimization (Negi and Rajeswaran, GLOBECOM '04, (Dec. 2004)). The solution to this sub-problem is then obtained under both total power and power spectral density constraints. This solution is utilized to iteratively construct the schedule (sub-band sizes) and power allocation, thus optimally solving the UWB max-min fair scheduling problem, to within any desired precision. Simulations on medium sized networks demonstrate the excellent performance of this scheme. A cellular architecture (not necessarily UWB) may also be considered in this framework. It is proved that Frequency Division Multiple Access is the optimal scheduling for a multi-band cellular architecture. This work was supported in part by the National Science Foundation under Career award 0347455. Arjunan Rajeswaran received his Masters degree in Electrical and Computer Engineering from Carnegie Mellon University in 2003. Since August 2003, he has been pursuing his doctoral research at Carnegie Mellon. His reserach interests lie in the area of wireless networks. His focus is in the application of information and communication theoretic tools towards wireless network design. Several IEEE publications reflect his curent research on Medium Access Control design and performance. Arjunan received the best student paper award at IEEE/ACM Broadnets 2004. Gyouhwan Kim received his B.S. and M.S. degree in Electronic Engineering from Sogang University in Korea, in 1994 and 1996, respectively. Since 1996, he has been working in the CDMA cellular system development team in Samsung Electronics. Currently, he is also working toward the Ph.D degree in the Department of Electrical and Computer Engineering at Carnegie Mellon University. His main research interests are in wireless networks and communication theory. Rohit Negi received the B.Tech. degree in Electrical Engineering from the Indian Institute of Technology, Bombay, India in 1995. He received the M.S. and Ph.D. degrees from Stanford University, CA, USA, in 1996 and 2000 respectively, both in Electrical Engineering. He has received the President of India Gold medal in 1995. Since 2000, he has been with the Electrical and Computer Engineering department at Carnegie Mellon University, Pittsburgh, PA, USA, where he is an Assistant Professor. His research interests include signal processing, coding for communications systems, information theory, networking, cross-layer optimization and sensor networks.