Inhibition of mild steel corrosion in hydrochloric acid medium by polymeric inhibitors containing residues of essential amino acid methionine

Ethyl ester hydrochloride of amino acid l-methionine 1 was converted to cationic monomers N,N-diallyl methionine ethyl ester hydrochloride 2 and hydrochloride salt of N,N-diallylmethionine 3. Cationic monomers 2 and 3 underwent alternate copolymerization with SO₂ in dimethyl sulfoxide to give terpolymers 4 and 5, respectively, both having?≈?1:1 ratio of sulfide and sulfoxide motifs owing to O transfer from dimethyl sulfoxide to the S. The sulfide groups in 5 have been oxidized with H₂O₂ to give polymer sulfoxide 6. In the presence of a small concentration of 35.2 µM (~?11?±?1 ppm) of each of the polymers 4, 5 and 6, the inhibition efficiency against mild steel corrosion in 1.0 M HCl at 60 °C was determined to be 90.8, 98.7 and 93.0%, respectively. The inhibition efficiency obtained from gravimetric weight loss was corroborated by the findings of potentiodynamic polarization and electrochemical impedance spectroscopy methods. Adsorption of polymer compounds onto the mild steel surface followed a mixture of chemisorption and physisorption processes and obeyed Langmuir, Temkin and Freundlich adsorption isotherms. The X-ray photoelectron spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy techniques further confirmed that the synthesized compounds formed a protective film onto the metal surface and prove it against further corrosion attack.     

The rheological,mechanical and templating effects of graphene oxide nanosheets in filled gel spun polyacrylonitrile

Polyacrylonitrile (PAN) in dimethylformamide solution containing 0.25 or 1 wt% graphene oxide (GO) was gel spun to tapes. Scanning electron microscopy of tapes showed compact staircase cross-sections hallmarking the gel spun products. Low shear rate rheometry of the tape precursors revealed a viscosity increase, while the structural viscosity indexes of dispersions dropped to 40 and 70% at high shear rates by 0.25 and 1 wt% GO inclusion, respectively. Furthermore, the sol–gel transition temperature of PAN solution was enhanced by about 2.5 and 10 °C with 0.25 and 1 wt% GO inclusion, respectively. Strain sweep test implied a gel-to-sol transition from 9 to 28% by 1 wt% GO inclusion. The experimental reinforcement coefficient corresponded the aligned Halpin–Tsai model confirming the suitable dispersion preparation route namely master batch dilution implementing strong interphase formation among the PAN chains and GO platelets. Molecular evolution analysis during air stabilization through a combined second derivative of FTIR spectra, Gaussian peak fitting represented by I_sd index, indicated the initial cyclization at 290 °C followed by its enhanced rate. Final I_sd was noticed to be 48% higher for the tapes containing GO nanosheets. GO inclusion not only enhanced the tape heat of stabilizations but also differentiated its proportional I_sd and toughness dependency based on the heat of stabilization.     

SDN-based wireless user management system

The degradation of end-to-end quality of service (QoS) on mobile users is becoming a common issue for IEEE 802.11 infrastructure-based networks in crowded areas. This research tackles the issue by employing an SDN framework on an integrated wireless/wired environment. Thereby, we present the development and implementation of a system that performs user management by analyzing the network load from the OpenFlow statistics, as well as the wireless information collected from the associated users. In order to analyse the behaviour of the proposed user migration algorithm, we evaluate the system under scenarios with different traffic load and user session duration. From the experiments, we observed that in several cases wireless users get a considerable QoS improvement at the application layer (up to 30% improvement in throughput and up to 20% in delay in our simulations) once the system is activated. Based on the results, we present an analysis on how and when user migration in multi-access point IEEE 802.11 networks can be most effective.     

Patch-based reconstruction of surfaces undergoing different types of deformations

We deal with the reconstruction of surfaces that deform under a variety of conditions. The deformation can range from no extension to a certain degree of extensibility. The deformed surface is reconstructed from a single image, given a 3D reference shape. This shape corresponds to the undeformed state of the surface and can be computed using any appropriate technique. In particular, we use homographies defined from two views of the surface. To proceed with the 3D reconstruction of the deformed surface, we assume that the deformations are locally homogeneous and that the overall surface deformation can be obtained by combining the local homogeneous deformations. For this purpose, the surface is split into small patches. For each patch, a mapping between the undeformed and the deformed shapes is computed. The mapping is specified by using the quadratic deformation model Fayad et al. (Proceedings of British Machine Vision Conference (BMVC), 2004). As a result, given the undeformed shape, we define an optimization procedure whose goal is to estimate the 3D positions of deformed points in each image. The optimization is performed on each patch, independently of the others. The experimental results show that this approach allows precise reconstruction of a wide class of real deformations.     

A high step‐up half‐bridge DC/DC converter with a special coupled inductor for input current ripple cancelation and extended voltage doubler circuit for power conditioning of fuel cell systems

This paper presents a high step‐up soft switched dc–dc converter having the feature of current ripple cancelation in the input stage that is specialized for power conditioning of fuel cell systems. The converter comprises a special half‐bridge converter and a rectifier stage based upon the voltage‐doubler circuit, in which the coupled‐inductor technology is amalgamated with switched‐capacitor circuit. The input current with no ripple is the principal characteristics of this topology that is achieved by utilizing a small coupled inductor. In addition, the low clamped voltage stress across both power switches and output diodes is another advantage of the proposed converter, which allows employing the metal–oxide–semiconductor field‐effect transistors with minuscule on‐state resistance and diodes with lower forward voltage‐drop, and thereby, the semiconductors' conduction losses diminish considerably. The inherent nature of this topology handles the switching scheme based on the asymmetrical pulse width modulation in order for switches to establish the zero voltage switching, leading to lower switching losses. Besides, because of the absence of the reverse‐recovery phenomenon, all diodes turn off with zero current switching. At last, a 250‐W laboratory prototype with the input voltage 24 V and output voltage 380 V is implemented to verify the especial features of the proposed converter. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetite (Fe3O4) Nanoparticles‐Catalyzed Sonogashira– Hagihara Reactions in Ethylene Glycol under Ligand‐Free Conditions

A novel application of nanoparticles of paramagnetic magnetite (Fe₃O₄) as an efficient catalyst for carbon‐carbon bond formation via the Sonogashira–Hagihara reaction under heterogeneous ligand‐free conditions in ethylene glycol (EG) is described. By using this catalyst, arylalkynes are produced from the reaction of aryl iodides and activated heteroaryl bromides with alkynes. The results are reproducible using the catalyst, which was prepared from different sources. The catalyst is easily separated by an external magnetic field from the reaction mixture. The separated catalyst can be recycled for several consecutive runs without appreciable loss of its catalytic activity.     

Contamination of UHT milk by aflatoxin M1 in Iran

In this study the levels of aflatoxin M₁ (AFM₁) in UHT milk samples were determined in May, August and November and February. Two hundred and ten UHT milk samples were obtained from supermarkets in Tehran, Iran. The occurrence and concentration range of AFM₁ in the samples were investigated by competitive enzyme-linked immunoabsorbent assay (ELISA) method. AFM₁ was found in 116 (55.2%) of 210 UHT milk samples examined. The levels of AFM₁ in 70 (33.3%) samples were higher than the maximum tolerance limit (0.05 μg/l) accepted by some European countries while none of the samples exceeded the prescribed limit of US regulations. The highest mean concentration of AFM₁ was recorded in February (0.087 μg/l). The lowest mean concentration of AFM₁ was recorded in August (0.021 μg/l). Statistical evaluation showed that there were significant difference (P < 0.01) between the mean concentrations of AFM₁ of UHT milk samples taken in February with May and August. AFM₁ contents of milk samples taken in February were not higher than UHT milk samples taken in November (P < 0.01). The AFM₁ incidence of exceeding legal limit in UHT milk samples (33.3%) was relatively much higher than some other countries. It was therefore concluded that, the levels of AFM₁ in UHT milk samples consumed in Iran were high and seemed to pose a threat to public health.     

Characterization and the hydrogen storage capacity of titania-coated electrospun boron nitride nanofibers

In the present work, titania-coated (TiO₂) boron nitride nanofibers were produced by the electrospinning method, and the effect of heat treatment on the nanofibers was studied. Electrospinning method is often adopted for the synthesis of one-dimensional nanofibers due to high productivity, simplicity, and cost-effectiveness. In this study, boric oxide was deposited on co-electrospun polyacrylonitrile and TiO₂. TiO₂-coated boron nitride nanofibers, with a diameter of 100 nm, were obtained after heat treatment and nitridation. The effects of heat treatment on the morphology, surface area and hydrogen storage capacity were studied extensively. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) showed long, bead-free nanofibers and the presence of TiO₂ nanoparticles on the nanofibers. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy depicted hexagonal structures of boron nitride. The hydrogen uptake capacities of the nanofibers were investigated by pressure composition isotherm (PCI) in the pressure range of 1–70 bar at room temperature.     

The role of Al and Mg in the hydrogen storage of electrospun ZnO nanofibers

Pure and doped ZnO nanofibers with Al and Mg were successfully synthesized via an electrospinning method using a sol–gel containing Polyvinylpyrrolidone as a spinning aid and a zinc nitrate precursor. Calcination of the doped and undoped electrospun nanofibers was conducted at 500 °C in air, and the resultant structures were analyzed by X-ray diffraction (XRD) and Raman spectroscopy. The diameter of the doped nanofibers decreased with increasing viscosity and conductivity, as measured by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Energy dispersive spectroscopy (EDS) showed that Mg and Al are present in ZnO nanofibers. The pressure composition isotherm (PCI) demonstrated that the capacity of hydrogen storage in pure zinc oxide nanofibers is a factor of two greater than that of zinc oxide nanoparticles. However, Al-doped ZnO nanofibers have the highest capacity of hydrogen storage (2.81 wt%) at room temperature.     

Multiple-step martensitic transformations in the Ni51Ti49 single crystal

Multiple-step martensitic transformations of an aged Ni₅₁Ti₄₉ single crystal using calorimetric method were investigated. Results show that for short aging times (10–45 min) multiple-step martensitic transformations on cooling occur in two steps. Applying intermediate aging times (1.25–4 h) results in three steps and long aging times (more than 8 h) lead to two-step martensitic transformations again. This behavior has not been recognized in NiTi single crystals in literatures. It can be related to the heterogeneity of composition and stress fields around Ni₄Ti₃ precipitates.