Design of efficient power amplifier for low power transmitters

This paper presents a fully integrated, low transmit-power and high-efficiency 2.4 GHz class-E power amplifier (PA) in TSMC 0.18 μm CMOS process for low-power transmitters such as wireless sensor networks (WSN). In this paper, a new output load has been proposed. Also, analytical design equations have been included to design an efficient low power circuit. This PA, employs the pad capacitance and bond-wire inductance of the output node, for satisfying class-E zero-voltage switching (ZVS) condition and matching the antenna’s 50 Ω resistance. By using bond-wire inductance instead of inductor in the output filter, smaller chip size and higher efficiency has been achieved compared to other works for low transmit-power applications. Also, the effectiveness of bulk-drive technique on faster switching and increasing efficiency have been evaluated. It has been proved that this technique leads to increase the efficiency of switching PAs. This PA delivers a range of output power from 2.7 to 7.2 dBm with a supply voltage range from 500 to 850 mV while achieving overall power efficiency range of 57.3–60.7%.     

Selective Removal of Carbon Dioxide from Wet CO2/H2 Mixtures via Facilitated Transport Membranes containing Amine Blends as Carriers

The selective separation of carbon dioxide (CO₂) from a wet gaseous mixture of CO₂/H₂ through facilitated transport membranes containing immobilized aqueous solutions of monoethanolamine (MEA), diethanolamine (DEA), ethylenediamine (EDA) and monoprotonated ethylenediamine (EDAH⁺) and their blends was experimentally investigated. The effect of CO₂ partial pressure, amine concentration, feed side pressure and amine species on the CO₂ and H₂ permeances were studied. The CO₂ permeability through amine solution membranes decreased with increasing CO₂ feed partial pressure but the H₂ permeance was almost independent of the H₂ partial pressure. A comparison of experimental results showed that single or blended amines with low viscosity and a moderate equilibrium constant, i.e., large forward and reverse reaction rate of CO₂‐amine, are suitable for effective separation of CO₂. The permeability of CO₂ generally increased with an increase in amine concentration, although this increase may be compromised by the salting out effect and decrease in diffusivities of species. The results obtained indicated that CO₂ permeance across a variety of amines are in the order of DEA (2 M) > MD (2 M) > MD (1 M) > MEA (2 M) > MEA (4 M) > MD (4 M) > DEA (1 M) > DEA (4 M) > MEA (1 M) for various concentrations of MEA + DEA blend and are in the order of EDAH⁺ (2 M) > DEA (2 M) > MH (2 M) > DH (2 M) > ED (2 M) > EDA (2 M) > MEA (2 M) for various blends of amine.     

Preparation of novel 2-(2-oxo-2H-chromen-4-yl)-3- arylthiazolidin-4-one derivatives using an efficient ionic liquid catalyst

An eco-friendly procedure for synthesis of 2-(2-oxo-2H-chromen-4-yl)-3-arylthiazolidin-4-one derivatives by three-component reaction of 2-oxo-2H-chromene-4-carbaldehydes, aromatic amines and thioglycolic acid, with tetramethylbutane-1,4-diammonium acetate as a low-cost ionic liquid catalyst under reflux condition is described. The use of an ionic liquid as a catalyst has the advantages of high yields, short reaction time and environmentally friendly reaction media.     

Protein Kinases and Parkinson’s Disease

Currently, the lack of new drug candidates for the treatment of major neurological disorders such as Parkinson’s disease has intensified the search for drugs that can be repurposed or repositioned for such treatment. Typically, the search focuses on drugs that have been approved and are used clinically for other indications. Kinase inhibitors represent a family of popular molecules for the treatment and prevention of various cancers, and have emerged as strong candidates for such repurposing because numerous serine/threonine and tyrosine kinases have been implicated in the pathobiology of Parkinson’s disease. This review focuses on various kinase-dependent pathways associated with the expression of Parkinson’s disease pathology, and evaluates how inhibitors of these pathways might play a major role as effective therapeutic molecules.     

New chatter-free sliding mode synchronization of steer-by-wire systems under chaotic conditions

Vehicle safety issues and its systems dependence on electronics are rapidly increasing. In intelligent vehicles, rigid components are replaced with controlled x-by-wire systems including configurable electronic elements. In the paper, through complete modeling of Steer-by-wire (SBW) nonlinear dynamics, the chaotic motion of the system is elucidated by a new yaw stability control method. The designed chatter free Sliding mode controller (SMC) is used to synchronize chaotic motion of the SBW system. Following stability and robustness analysis, computer simulations show that the proposed control system is quite significant for nonlinear systems like the SBW system. Besides, the robustness of the SMC against exogenous disturbance protects vehicle from undesired slide and spin motions.

     

Static and dynamic corrosion behavior of SnO2-doped AZS slip cast refractory in SLS glass

The corrosion behavior of a tin IV oxide-doped AZS-refractory, subject to static and dynamic corrosion testing at 1370˚C in soda-lime-silica glass, was studied considering the effect of the microstructural features on corrosion. The refractory was synthesized by slip cast methods through reaction sintering of alumina and zircon raw materials using SnO₂ as a sintering agent. SnO₂ had a considerable influence in the enhanced alumina/zircon reaction sintering and the subsequently evolved microstructures of an interlocked Zr_(1-x)Sn_(x)O₂ solid solution reinforced alumina-mullite composite. The process kinetics of the refractory corrosion followed reasonably well the predicted dependence on the square root of angular velocity under forced convection corrosion. Glass chemical corrosion and erosion of the refractory, under static and dynamic glass conditions, respectively, revealed the Zr_(1-x)Sn_(x)O₂ solid solution-rich mullite matrix as providing the most corrosion resistance and glass compatibility.     

Improving Deep Attractor Network by BGRU and GMM for Speech Separation

Deep Attractor Network (DANet) is the state-of-the-art technique in speech separation field, which uses Bidirectional Long Short-Term Memory (BLSTM), but the complexity of the DANet model is very high. In this paper, a simplified and powerful DANet model is proposed using Bidirectional Gated neural network (BGRU) instead of BLSTM. The Gaussian Mixture Model (GMM) other than the k-means was applied in DANet as a clustering algorithm to reduce the complexity and increase the learning speed and accuracy. The metrics used in this paper are Signal to Distortion Ratio (SDR), Signal to Interference Ratio (SIR), Signal to Artifact Ratio (SAR), and Perceptual Evaluation Speech Quality (PESQ) score. Two speaker mixture datasets from TIMIT corpus were prepared to evaluate the proposed model, and the system achieved 12.3 dB and 2.94 for SDR and PESQ scores respectively, which were better than the original DANet model. Other improvements were 20.7% and 17.9% in the number of parameters and time training respectively. The model was applied on mixed Arabic speech signals and the results were better than that in English.     

Evaluation of Fracture Mechanisms in Al-Si Metal Matrix Nanocomposites Produced by Three Methods of Gravity Sand Casting,Squeeze Casting and Compo Casting in Semi-Solid State

Silicon - Magnetic stirring is considered to be the most useful stirring method in semi-solid casting processes which doesn’t have the restrictions of the mechanical stirring. In this...