Sono-Fenton regeneration of granular activated carbon saturated with Rhodamine B: Optimization using response surface methodology

This study investigated the combination of chemical and ultrasonic regeneration (Sono-Fenton), used for regenerating granular activated carbon (GAC) saturated with Rhodamine B (RB). This process was modeled and optimized using response surface methodology (RSM) based on central composite design (CCD). Effective parameters on regeneration efficiency such as pH, concentration of hydrogen peroxide (H₂O₂), and time of ultrasonic irradiation were optimized and modeled using the reduced quadratic method. The fitness of the model was checked by the determination coefficient (R²?=?0.9978). At optimum condition, the effective parameters of pH?=?3.84, concentration of H₂O₂?=?38.28 (mM), and time of ultrasonic irradiation?=?23.11(min), maximum regeneration efficiency (87.88%) was achieved, the results of which were obtained after four-time sequential adsorption–regeneration cycles were acceptable. Desorption and degradation of RB were conducted through the generation of active species, including hydroxyl radicals and high-energy ultrasound. The regeneration efficiency was increased using this combination method. In conclusion, the Sono-Fenton method is suggested to be used more widely in regeneration processes.     

Decoupled adaptive neuro-fuzzy (DANF) sliding mode control system for a Lorenz chaotic problem

This paper introduces a decoupled adaptive neuro-fuzzy (DANF) sliding mode control system for the chaos control problem in a system without precise system model information. It has on-line learning ability to deal with the parametric uncertainty and disturbance by adjusting the control parameters and no constrained conditions and prior knowledge of the controlled plant is required in the design process. Also, a decoupled adaptive sliding mode controller is developed to control the chaotic Lorenz system for comparison. Finally, the effectiveness of the proposed decoupled adaptive sliding mode and DANF sliding mode controllers are demonstrated by some simulated results.     

Detection of Epstein-Barr virus in oral scrapes in HIV infection, in hairy leukoplakia, and in healthy non-HIV-infected people

Epstein Barr virus (EBV) has been implicated in the pathogenesis of oral hairy leukoplakia (OHL). EBV is normally detected by lesional biopsy. The objectives of this study were to examine oral scrapes containing squamous epithelial cells (squames) from HIV-infected people with and without clinical lesions of OHL, and from healthy non-HIV-infected controls, for EBV-DNA by the polymerase chain reaction (PCR). EBV-DNA was detected in 65% of HIV-infected people and 20% of healthy HIV-negative controls but in HIV-infected individuals it was found as frequently in those without OHL as in those with. Moreover, EBV-DNA was not detected in all HIV-infected individuals, nor in all OHL. The results suggest that the presence or absence of detectable EBV-DNA in oral scrapes, though a guide, cannot be regarded as absolutely reliable in the diagnosis or exclusion of OHL.     

3-D Data Denoising and Inpainting with the Low-Redundancy Fast Curvelet Transform

In this paper, we first present a new implementation of the 3-D fast curvelet transform, which is nearly 2.5 less redundant than the Curvelab (wrapping-based) implementation as originally proposed in Ying et al. (Proceedings of wavelets XI conference, San Diego, 2005) and Candès et al. (SIAM Multiscale Model. Simul. 5(3):861–899, 2006), which makes it more suitable to applications including massive data sets. We report an extensive comparison in denoising with the Curvelab implementation as well as other 3-D multi-scale transforms with and without directional selectivity. The proposed implementation proves to be a very good compromise between redundancy, rapidity and performance. Secondly, we exemplify its usefulness on a variety of applications including denoising, inpainting, video de-interlacing and sparse component separation. The obtained results are good with very simple algorithms and virtually no parameter to tune.     

Region-Based Active Contours with Exponential Family Observations

In this paper, we focus on statistical region-based active contour models where image features (e.g. intensity) are random variables whose distribution belongs to some parametric family (e.g. exponential) rather than confining ourselves to the special Gaussian case. In the framework developed in this paper, we consider the general case of region-based terms involving functions of parametric probability densities, for which the anti-log-likelihood function is a special case. Using shape derivative tools, our effort focuses on constructing a general expression for the derivative of the energy (with respect to a domain), and on deriving the corresponding evolution speed. More precisely, we first show by an example that the estimator of the distribution parameters is crucial for the derived speed expression. On the one hand, when using the maximum likelihood (ML) estimator for these parameters, the evolution speed has a closed-form expression that depends simply on the probability density function. On the other hand, complicating additive terms appear when using other estimators, e.g. method of moments. We then proceed by stating a general result within the framework of multi-parameter exponential family. This result is specialized to the case of the anti-log-likelihood function with the ML estimator and to the case of the relative entropy. Experimental results on simulated data confirm our expectations that using the appropriate noise model leads to the best segmentation performance. We also report preliminary experiments on real life Synthetic Aperture Radar (SAR) images to demonstrate the potential applicability of our approach.     

Electrochemical synthesis and in situ spectroelectrochemistry of conducting polymer nanocomposites. I. polyaniline/TiO2, polyaniline/ZnO,and polyaniline/TiO2+ZnO

The polyaniline (PAn), polyaniline/titanium dioxide (PAn/TiO₂), polyaniline/zinc oxide (PAn/ZnO), and a novel conducting polymer nanocomposites, polyaniline/titanium dioxide + zinc oxide (PAn/TiO₂+ZnO), were synthesized by in situ electropolymerization and potential cycling on gold electrode. The PAn and nanocomposite films were characterized by cyclic voltammetry, Fourier transform infra‐red (FTIR) spectroscopy, in situ resistivity measurements, in situ UV–Visible, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The differences between cathodic and anodic peaks of three redox couples were obtained for PAn and polymeric nanocomposite films. During cathodic and anodic scans, the shift of potential was observed for polymer nanocomposite films. The characteristic FTIR peaks of PAn were found to shift to lower wavelengthsin polymer nanocomposite films. These observed effects have been attributed to interaction of TiO₂, ZnO, and TiO₂+ZnO particles with PAn molecular chains. Significant differences from in situ resistivity of PAn and nanocomposite films were obtained. The resistance of PAn/TiO₂, PAn/ZnO, and PAn/TiO₂+ZnO films were found to be smaller than the PAn film. The in situ UV–Visible spectra for Pan and polymer nanocomposite films were studied. The results show the intermediate spectroscopic properties between PAn and polymer nanocomposite films. The morphological analyses of PAn and nanocomposite films have been investigated. The nanocomposites SEM and TEM micrographs suggest that the inorganic semiconductor particles were incorporated in organic conducting polymer, which consequently modifies the morphology of the films significantly. POLYM. COMPOS., 35:351–363, 2014. © 2013 Society of Plastics Engineers     

Electrochemical reduction of hexahydro-1,3,5-trinitro-1,3,5-triazine in aqueous solutions

Electrochemical reduction of RDX, hexahydro-1,3,5-trinitro-1,3,5-triazine, a commercial and military explosive, was examined as a possible remediation technology for treating RDX-contaminated groundwater. A cascade of divided flow-through cells was used, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes, initially using acetonitrile/water solutions to increase the solubility of RDX. The major degradation pathway involved reduction of RDX to the corresponding mononitroso compound, followed by ring cleavage to yield formaldehyde and methylenedinitramine. The reaction intermediates underwent further reduction and/or hydrolysis, the net result being the complete transformation of RDX to small molecules. The rate of degradation increased with current density, but the current efficiency was highest at low current densities. The technique was extended successfully both to 100% aqueous solutions of RDX and to an undivided electrochemical cell.     

Preparation of Silane-Grafted and Moisture Cross-Linked Low Density Polyethylene: Part I: Factors Affecting Performance of Grafting and Cross-Linking

In the present work, the silane grafting and water cross-linking of low density polyethylene (LDPE) were investigated. The grafting reaction was carried out in an internal mixer and polyethylene cross-linking was done in hot water. The effect of silane, peroxide, catalyst, carbon black, cross-linking time, and cross-linking temperature on the grafting and cross-linking processes are reported. Vinyl trimethoxy silane (VTMO) and di-cumyl peroxide (DCP) were selected as grafting agent and initiator respectively. Silane grafting on polyethylene was determined using Fourier transform infrared (FTIR) spectroscopy and torque monitoring of the mixer. Absorption peak due to –Si–OCH₃ groups in FTIR and torque increasing due to silane grafting in the mixer illustrated that silane-grafting reactions occurred. The FTIR data demonstrated that the extent of silane grafting was increased as the concentration of silane and peroxide was increased. Thermogravimetry analysis (TGA) determined that the thermal stability of LDPE increased by increasing the amount of silane grafting. Gel fraction increased with silane and peroxide concentration. As the percent of of catalyst increase the time scale for specified gel content shifted to shorter times. Incorporation of carbon black into LDPE decreased the extent of silane grafting and gel fraction. Water temperature increasing in cross-linking stage reduced the time to maximum degree of cross-linking.