Thermal Analysis of Sulphamethoxazole - Sugar Physical Mixes

Differential scanning calorimetry and hot stage microscopy have been used to study the interactions between sulphamethoxazole and the sugars maltose, glucose, sucrose and mannitol. Only the sulphamethoxazole-mannitol system appeared to be stable and presented a eutectic containing 90.3% sulphamethoxazole. Heats of fusion for sulphamethoxazole, mannitol and their eutectic were 33.4, 73.6 and 39.9 cal g respectively.     

Evidence for Remote Effects of Dreissenid Mussels on the Amphipod Diporeia: Analysis of Lake Ontario Benthic Surveys, 1972–2003

The status of invasive dreissenid mussels (Dreissena polymorpha and D. bugensis) and native amphipods (Diporeia spp.) in Lake Ontario was assessed in 2003 and compared with historical data. D. polymorpha (zebra mussels) were rarely observed in 2003, having been displaced by D. bugensis (quagga mussels). D. bugensis expanded its depth range from 38 m depth in 1995 to 174 m in 2003 and this dreissenid reached densities averaging 8,000/m² at all sites < 90 m. During the same time period, Diporeia populations almost completely disappeared from 0–90 m depth, continuing a declining trend from 1994–1997 reported in previous studies. The average density of Diporeia in the 30–90 m depth interval decreased from 1,380/m² to 63/m² between 1997 and 2003. Prior to 2003, areas deeper than 90 m represented a refuge for Diporeia, but even these deep populations decreased, with densities declining from 2,181/m2 in 1999 to 545/m2 in 2003. Two common hypotheses for the decline of Diporeia in the Great Lakes are food limitation and a toxin/pathogen associated with dreissenid pseudofeces. The Diporeia decline in deep waters preceded the expansion of D. bugensis to these depths, and suggests that shallow dreissenid populations remotely influence profundal habitats. This pattern of decline is consistent with mechanisms that act from some distance including nearshore dreissenid grazing and downslope transport of pseudofeces.     

Throughput and Delay in Random Wireless Networks With Restricted Mobility

Grossglauser and Tse (2001) introduced a mobile random network model where each node moves independently on a unit disk according to a stationary uniform distribution and showed that a throughput of Theta(1) is achievable. El Gamal, Mammen, Prabhakar, and Shah (2004) showed that the delay associated with this throughput scales as Theta(nlogn), when each node moves according to an independent random walk. In a later work, Diggavi, Grossglauser, and Tse (2002) considered a random network on a sphere with a restricted mobility model, where each node moves along a randomly chosen great circle on the unit sphere. They showed that even with this one-dimensional restriction on mobility, constant throughput scaling is achievable. Thus, this particular mobility restriction does not affect the throughput scaling. This raises the question whether this mobility restriction affects the delay scaling. This correspondence studies the delay scaling at Theta(1) throughput for a random network with restricted mobility. First, a variant of the scheme presented by Diggavi, Grossglauser, and Tse (2002) is presented and it is shown to achieve Theta(1) throughput using different (and perhaps simpler) techniques. The exact order of delay scaling for this scheme is determined, somewhat surprisingly, to be of Theta(nlogn), which is the same as that without the mobility restriction. Thus, this particular mobility restriction does not affect either the maximal throughput scaling or the corresponding delay scaling of the network. This happens because under this 1-D restriction, each node is in the proximity of every other node in essentially the same manner as without this restriction     

LD泵浦的声光调Q腔内倍频激光器

研制成用ＬＤ泵浦的声光调Ｑ的Ｎｄ：ＹＶＯ４－ＫＴＰ腔内倍频激光器，得到了ＴＥＭ００模、频率高达１００ｋＨｚ的稳定的５３２ｕｍ绿激光脉冲系列输出，阈值泵浦功率为２７ｍＷ；在连续５７０ｍＷ的泵浦功率下，绿激光脉冲的峰值功率达１１００Ｗ，脉宽为４．６ｕｓ；输出功率稳定，在±５℃的工作温度变化下，输出功率变化小于±２％。此种器件可望得到广泛的应用。     

Resistance measurements and vortex fluctuations in two-dimensional superconducting films

Recently theories of vortex fluctuations in two-dimensional superconducting films have been compared to the experimentally determined power law dependence of voltage on current and to the temperature-dependent resistance in small applied fields. Here an alternative interpretation of the power law and a practical difficulty of flux pinning for measurements in small fields are pointed out. To illustrate these points, experimental examples are presented for very homogeneous granular aluminum films.     

Wood processing variables and adhesive joint performance

In order to obtain a bonded wood product from the tree, wood must be subjected to a series of processes. These include, among others, vital processes like drying of the green wood and machining of the surfaces of the dried wood in preparation for bonding. However, when wood is machined with dull blades, thermal degradation of the wood frequently occurs. The effects of kiln drying and thermal degradation of wood on the performance of the adhesive joints subsequently formed from such wood were investigated. Tapered double cantilever beam (TDCB) test specimens obtained from hard maple and phenol–resorcinol–formaldehyde (PRF) adhesives were used in the investigations. The enhancement of fracture energy due to the reduction in the moisture content of wood, the improved performance of adhesive joints due to rejointing of wood surfaces before bonding, and the reduction of adhesive joint strength resulting from thermal degradation of wood are presented and discussed.     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.