Damage analysis of a crack layer

Damage analysis of a crack layer in polystyrene is carried out by employing optical microscopy and principles of quantitative steteology. The results show that, within the quasistatic phase of crack layer propagation, the average crazing density, along the trailing edge of the active zone, is constant. This is consistent with a self-similarity hypothesis of damage evolution employed by the crack layer theory. The average crazing densities within the active zone and along its trailing edge are found to be practically equal. A layer of constant crazing density, adjacent to the crack planes, accompanies the crack during its quasi-static growth. This suggests that: (1) a certain level of crazing density should be reached, around the crack tip, prior to crack advance; (2) the specific energy, associated with this ‘core’ of damage, could be considered as a Griffith's type energy. The results are in favour of certain hypotheses adopted by the crack layer theory.     

Effects of manufacturing defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates

The effects of defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates have been measured. The defects studied were cut fibre plies, omission of polymer films and local delamination produced by the inclusion of foreign matter. Of these it was found that only cut plies had a significant detrimental effect on the strength of a laminate. For specimens with two cut plies, the failure stress, tensile, flexural and compressive in the remaining continuous plies was the same as in the defect-free material, provided that the cut plies were widely separated. However the failure stresses were 15–18% lower in the continuous plies in the specimens containing two cut plies which were more closely spaced and in specimens containing four cut plies.     

The formation of zinc ferrite

The formation of zinc ferrite from zinc oxide and iron oxide is evaluated with high temperature X-ray diffraction experiments. Despite the problem of accurately determining the temperature of the part of the sample actually investigated, a kinetic analysis of the isothermal formation is shown to be possible. From these data the energy and entropy of activation are derived. It is further shown that neither corrections for grain growth during formation nor the presence of impurities have any influence on these results. On the other hand, the size of the reactant iron oxide particles is found to have a strong influence on both the energy and entropy of activation.     

Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

Theory of propagating deformation bands

A model for propagating deformation bands is developed, based on a mechanical equation of state and on evolution equations for the structure parameters. It is shown that, contrary to normal deformation, it is necessary to discriminate between global parameters which depend solely on time elapsed and local parameters which are functions of the strain history. Correspondingly, two sets of equations are presented, one describing the development of the global parameters in the course of time, the other giving the evolution of the local state parameters in the course of deformation, i.e. as a function of strain. Measurable quantities derived from the first set are the load serrations and the band velocity, while the second set yields the flow stress and the strain profile of the propagating band.     

Elastic-Plastic Contact Damage in a Lead Lanthanum Zirconate Titanate

Spherical indenters were used to produce elastic-plastic contact damage in a lead lanthanum zirconate titanate (PLZT) under conditions of quasi-static and impact loading. The extent of radial cracking produced under both loading conditions showed good correlation with the response predicted by an earlier fracture mechanics analysis for quasi-static conditions. Calculated radial crack lengths corresponding to conditions of impact loading exhibited excellent agreement with experimentally measured values. The dynamic hardness of the PLZT was determined to be ∼ 1.5 times the quasi-static hardness. Differences in the radial crack lengths produced under the two loading conditions were attributed primarily to this difference in hardness response.     

Clinical psychologists reflect on the usefulness of various components of graduate training.

Graduates of clinical training programs were surveyed to determine the degree to which they have found various graduate school experiences useful in their professional work. Samples of academic clinical psychologists and practicing clinical psychologists reported time allocation and preference for various professional activities, perceived usefulness of various theoretical orientations, and the influence on their current professional work of 19 different graduate training topics. Results suggest that where differences exist, academic clinical psychologists are generally more satisfied with Boulder-model-inspired scientific training than are clinical practitioners. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ultra-strong, well-apodised Bragg gratings in chalcogenide rib waveguides

The first ultra-strong, near-perfect, raised-apodised Bragg gratings in As/sub 2/S/sub 3/ chalcogenide rib waveguides using /spl lambda/=532 nm light and a modified Sagnac holographic writing setup are demonstrated. Good agreement is achieved between the experimental results and the numerical modelling of the gratings using the transfer matrix analysis for thin film structures.     

Physical parameters of fiber affecting passage from the rumen

Our objective was to review the factors that affect fiber passage from the rumen. Rumen residence time and passage from the rumen are important in control of intake, digestibility, protein metabolism, and protein escape. Physical factors associated with particle size and particle specific gravity affect passage from the rumen. Although particles of 5 cm may pass through the reticulo-omasal orifice, most particles leaving the rumen are smaller than 1 mm. Polypropylene ribbon cut into 7-cm lengths, introduced into the rumen, markedly reduced intake and were ruminated to fine particle size before being passed. Materials with specific gravity less than 1.0 are ruminated extensively and are passed slowly. As specific gravity of plastic particles increase, rumination of particles is decreased and passage is increased. Particles with specific gravities between 1.17 and 1.42 pass most rapidly. Increasing specific gravities further results in a decline in passage and a further lowering of rumination of particles. Natural hay and fresh forages are hydrated in the rumen, which causes functional specific gravity to increase. Some factors that affect rate of change of functional specific gravity of forages have been investigated. Small particle size, autoclaved rumen fluid, buffer solutions, and specific salts increased the rate of change of functional specific gravity of particles. Understanding of these factors may enable us to make better decisions in managing ruminant productions systems.