Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Empirical evaluation of H.264/SVC streaming in resource-constrained multihomed mobile networks

Nomadic users of streamed multimedia content in mobile networks are often faced with resource-constrained network paths that suffer from low bandwidth. Streaming high-quality video in such a challenging scenario demands a set of highly adaptive schemes, which have not been sufficiently explored in particular for the emerging H.264 Scalable Video Coding (H.264/SVC) standard. In this paper, we empirically investigate the performance of streaming H.264/SVC scalable video streams to users in multihomed mobile networks containing multiple available transmission paths. Previous work has demonstrated the feasibility of aggregating bandwidth of multiple paths to deliver video streams when no single, sufficiently high bandwidth path is available. We focus on evaluating the enhanced performance of multipath bandwidth-aggregation streaming by exploiting a quality-layers based, H.264/SVC-specific packet prioritisation scheme for quality-aware multipath packet scheduling and selective packet dropping in case of bandwidth shortage even after aggregation. Additionally, we explore a base-layer rate control scheme for H.264/SVC delivery in ultra-low bandwidth environments. Through extensive experimentation on a realistic hardware-based testbed, we obtain a comprehensive and insightful understanding of the behaviour of H.264/SVC streams when transmitted across multiple paths in mobile networks. We quantify the improvements offered by the use of H.264/SVC-specific packet prioritisation schemes compared with an existing generic scalable video prioritisation scheme, and the benefits by the use of base-layer rate control in ultra-low bandwidth situations. The performance of the multipath streaming schemes is further compared with that of an ideal single high bandwidth path. We also identify the remaining challenges that must be overcome if such streaming schemes are to offer performance close to that of the ideal single high bandwidth path.     

Classification of time series by shapelet transformation

Time-series classification (TSC) problems present a specific challenge for classification algorithms: how to measure similarity between series. A shapelet is a time-series subsequence that allows for TSC based on local, phase-independent similarity in shape. Shapelet-based classification uses the similarity between a shapelet and a series as a discriminatory feature. One benefit of the shapelet approach is that shapelets are comprehensible, and can offer insight into the problem domain. The original shapelet-based classifier embeds the shapelet-discovery algorithm in a decision tree, and uses information gain to assess the quality of candidates, finding a new shapelet at each node of the tree through an enumerative search. Subsequent research has focused mainly on techniques to speed up the search. We examine how best to use the shapelet primitive to construct classifiers. We propose a single-scan shapelet algorithm that finds the best $k$ shapelets, which are used to produce a transformed dataset, where each of the $k$ features represent the distance between a time series and a shapelet. The primary advantages over the embedded approach are that the transformed data can be used in conjunction with any classifier, and that there is no recursive search for shapelets. We demonstrate that the transformed data, in conjunction with more complex classifiers, gives greater accuracy than the embedded shapelet tree. We also evaluate three similarity measures that produce equivalent results to information gain in less time. Finally, we show that by conducting post-transform clustering of shapelets, we can enhance the interpretability of the transformed data. We conduct our experiments on 29 datasets: 17 from the UCR repository, and 12 we provide ourselves.     

Tight Bounds for Adopt-Commit Objects

We give matching upper and lower bounds of \(\varTheta(\min(\frac{\log m}{\log \log m},\, n))\) for the individual step complexity of a wait-free m-valued adopt-commit object implemented using multi-writer registers for n anonymous processes. While the upper bound is deterministic, the lower bound holds for randomized adopt-commit objects as well. Our results are based on showing that adopt-commit objects are equivalent, up to small additive constants, to a simpler class of objects that we call conflict detectors. Our anonymous lower bound also applies to the individual step complexity of m-valued wait-free anonymous consensus, even for randomized algorithms with global coins against an oblivious adversary. The upper bound can be used to slightly improve the cost of randomized consensus against an oblivious adversary. For deterministic non-anonymous implementations of adopt-commit objects, we show a lower bound of \(\varOmega(\min(\frac{\log m}{\log \log m}, \frac{\sqrt{\log n}}{\log \log n}))\) and an upper bound of \(O(\min(\frac{\log m}{\log \log m},\, \log n))\) on the worst-case individual step complexity. For randomized non-anonymous implementations, we show that any execution contains at least one process whose steps exceed the deterministic lower bound.     

The role of Al in C-S-H: NMR, XRD, and compositional results for precipitated samples

X-ray diffraction, compositional analysis, and ²⁹Si and ²⁷Al MAS NMR spectroscopy of Al-substituted tobermorite-type C-S-H made by precipitation from solution provide significant new insight into the structural mechanisms of Al-substitution in this important and complicated phase. Al occurs in 4-, 5-, and 6-coordination (Al[4], Al[5], and Al[6]) and plays multiple structural roles. Al[4] occurs on the bridging tetrahedra of the drierkette Al-silicate chains, and Al[5] and Al[6] occur in the interlayer and perhaps on particle surfaces. Al does not enter either the central Ca-O sheet or the pairing tetrahedra of the tobermorite-type layers. Al[4] occurs on three types of bridging sites, Q³ sites that bridge across the interlayer; Q² sites that are charge balanced by interlayer Ca⁺², Na⁺, or H⁺; and Q² sites that are most likely charge balanced by interlayer or surface Al[5] and Al[6] through Al[4]-O-Al[5,6] linkages. Although the data presented here are for relatively well-crystallized tobermorite-type C-S-H with C/S ratios ≤ 1.2, comparable spectral features for hydrated white cement pastes in previously published papers[30], [31] and [32] [M.D. Andersen, H.J. Jakobsen, J. Skibsted, Incorporation of aluminum in the calcium silicate hydrate (C-S-H) of hydrated Portland cements: a high-field ²⁷Al and ²⁹Si MAS NMR investigation Inorg. Chem. 42 (2003) 2280-2287; M.D. Andersen, H.J. Jakobsen, J. Skibsted, Characterization of white Portland cement hydration and the C-S-H structure in the presence of sodium aliminate by ²⁷Al and ²⁹Si MAS NMR spectroscopy, Cem. Concr. Res. 43 (2004) 857-868; M.D. Andersen, H. J. Jakobsen, J. Skibsted, A new aluminum-hydrate phase in hydrated Portland cements characterized by ²⁷Al and ²⁹Si MAS NMR spectroscopy, Cem. Concr. Res., submitted for publication.] indicate the presence of similar structural environments in the C-S-H of such pastes, and by implication OPC pastes.     

Properties of cuticular oxidases used for sex pheromone biosynthesis byHeliothis zea

Biosynthesis of the aldehydic sex pheromone components released by females ofHeliothis zea was found to be catalyzed by primary alcohol oxidases residing in the cuticle that covers the glands. Activity, as indicated by conversion of primary alcohol to aldehyde, was as high in cell-free cuticle as it was in intact pheromone glands. Studies indicated that some activity was associated with the surface of the epicuticle and could be removed, into buffer, by sonication. However, the majority of activity lies within the inner epicuticle and exo- and endocuticular layers. The oxidase was not functional in pharate pupae that did not have mature adult cuticle but became functional just prior to adult emergence. The enzyme in individual glands was saturated at alcohol concentrations above 100 n. moles. Nonionic detergents did not affect the activity of the oxidase in the cuticle but treatment with either 7 M urea or 1% SDS resulted in total loss of activity. Studies on the effect of pH indicated an optimum at 6.4; however, activity was high throughout the range of 5–9. The oxidase was functional in both dichloromethane and hexane, suggesting that this enzyme system may have applications for organic synthesis of aldehydes.     

Physical agglomeration behavior in preparation of cellulose‐N‐methyl morpholine N‐oxide hydrate solutions by simple mixing

The different melting temperatures of N‐methyl morpholine N‐oxide (NMMO) hydrates in the cellulose–NMMO hydrate solution may be explained by the rather different crystal structures of NMMO hydrates, which are determined by the amount of the hydrates. The preparative process of cellulose–NMMO hydrate solution may result in cellulose structural change from cellulose I to cellulose II, depending on the amount of the hydrate. Mixtures of cellulose and NMMO hydrate in a blender was changed from the granules to slurry with increasing mixing time at 60–70°C, which is below the melting point of the NMMO hydrate. In the case of 15 wt % cellulose–NMMO hydrate granules, which were made by mixing for 20 min, the melting points of various NMMO hydrates were obtained as 77.8°C (n = 0.83), 70.2°C (n = 0.97), and 69.7°C (n = 1.23), respectively, depending on the hydrate number. However, the melting points of cellulose–NMMO hydrate slurry and solution were shifted lower than those of cellulose granules, while the mixing time of slurry and solution are 25 and 35 min, respectively. These melting behaviors indicate instantaneous liquefaction of the NMMO hydrate and the diffusion of the NMMO hydrate into cellulose during mixing in a blender. When cellulose was completely dissolved in NMMO hydrate, the crystal structure of cellulose showed only cellulose II structure. In the cellulose–NMMO products of granules or slurry obtained by high‐speed mixing, which is a new preparation method, they still retained the original cellulose I structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1687–1697, 2004     

Aqueous electrochemical intercalation of bromine into graphite fibers

For the first time, graphite fibers have been electrochemically intercalated with Br⁻ that have the same structure and properties as those intercalated from vapor phase Br₂. This was accomplished by intercalating pitch-based Thornel^® K-1100 graphite fibers at low temperature (near 0 °C) and high currents (2 A) for long times (6 h). The mechanism appears to be that Br⁻ is oxidized to aqueous Br₂ which, when sufficient local concentration builds up, intercalates the fiber. This was confirmed by intercalating K-1100 fiber in a saturated aqueous Br₂ solution without passing an electrical current. The applied voltage does apparently lower the activation energy of the reaction as evidenced by the observation that P-120 and P-100 fibers will not intercalate in aqueous Br₂ unless a voltage is applied.     

A study of the methylolation of phenol using gel permeation chromatography

Gel permeation chromatography (GPC) was used to investigate the course of the sodium hydroxide catalysed methylolation of phenol in dilute aqueous solution. At low concentrations, the initial rate of methylolation was directly proportional to the concentrations of sodium hydroxide and of formaldehyde. By computer integration of the rate equations for the methylolation of phenol, of 2-methylol phenol and of 4-methylol phenol, the experimental rate curves were simulated and optimal values for the rate constants of all the methylolation steps were obtained.     

Laser Specular Reflectance and the Optical rms Roughness of Alumina

Using laser specular reflectance, the optical rms roughnesses (σ₀'S) of 42 polycrystalline aluminas (PCA's) were determined. From these conventional experimental results, a nomogram was constructed so that single grazing angle (α) measurements could be used to predict σ₀. Subsequently, the nomogram was reassessed using five commercially important PCA's and one single-crystal sapphire (SC). The outcomes were twofold: that this nomogram was valid for PCA's over the range of 0.28 σ₀ 0.10 μm, but that the nomogram was invalid for SC sapphire. When the conventional experimental method was compared with the nomogram method at three different single-angle values, a 1:1 correspondence was observed for α= 78°, 80°, and 82°. The present noncontact method is advocated for speed and cleanliness, particularly when a quality assurance method is desired.