Societal Safety: Concept,Borders and Dilemmas

In most industrialized countries, the end of the Cold War marked a change in focus from preparedness for war to an increasing focus on civil society's own vulnerability and safety. To meet new threats and changing risks, there is also a need for new analytical concepts. Societal safety is a concept developed in Norway during the last decade. It could be defined as: ‘The society's ability to maintain critical social functions, to protect the life and health of the citizens and to meet the citizens' basic requirements in a variety of stress situations’. It aims to be a systematic approach for understanding, mitigating and responding to social problems such as extraordinary stresses and losses, interferences in complex and mutual dependent systems, or lack of trust in vital social institutions. Future threats to society are not limited to specific sectors or areas, but stem from complex interactions amongst economic, technological, social and cultural factors. Thus, the main challenges to improve societal safety will be the ability to coordinate, organize and assign clear roles to different actors at the international, national and local levels. Societal safety has interfaces with other safety‐related areas such as national security, sustainable development, human security and incident management (handling of isolated accidents, common illness and ordinary criminal acts). Societal safety is, however, a sensitive political issue containing dilemmas and value choices that are hardly possible to perceive or solve as pure scientific problems.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Interfacial activity and rate of palladium(II) extraction with decyl pyridine monocarboxylates

Decyl isonicotiniate and decyl nicotiniate permit a rapid extraction of palladium(II) from its hydrochloride solutions. Decyl picoliniate is not a suitable extractant. 4-Octylphenylamine can act as a phase transfer catalyst when its concentration in the organic phase is at least 2·5 × 10^?4 M . It seems that the interfacial adsorption of pyridine carboxylates and of 4-octylphenylamine is not the decisive phenomenon in palladium(II) extraction. The negligible protonation of the pyridine-type extractants and the phase transfer catalysis explains well the quick extraction of palladium(II) with the commercial and highly hydrophobic extractant ACORGA CLX-50.     

Nature-Inspired Meta-Heuristics on Modern GPUs: State of the Art and Brief Survey of Selected Algorithms

Graphic processing units (GPUs) emerged recently as an exciting new hardware environment for a truly parallel implementation and execution of Nature and Bio-inspired Algorithms with excellent price-to-power ratio. In contrast to common multicore CPUs that contain up to tens of independent cores, the GPUs represent a massively parallel single-instruction multiple-data devices that can nowadays reach peak performance of hundreds and thousands of giga floating-point operations per second. Nature and Bio-inspired Algorithms implement parallel optimization strategies in which a single candidate solution, a group of candidate solutions (population), or multiple populations seek for optimal solution or set of solutions of given problem. Genetic algorithms (GA) constitute a family of traditional and very well-known nature-inspired populational meta-heuristic algorithms that have proved its usefulness on a plethora of tasks through the years. Differential evolution (DE) is another efficient populational meta-heuristic algorithm for real-parameter optimization. Particle swarm optimization (PSO) can be seen as nature-inspired multiagent method in which the interaction of simple independent agents yields intelligent collective behavior. Simulated annealing (SA) is global optimization algorithm which combines statistical mechanics and combinatorial optimization with inspiration in metallurgy. This survey provides a brief overview of the latest state-of-the-art research on the design, implementation, and applications of parallel GA, DE, PSO, and SA-based methods on the GPUs.     

Development of high‐definition aqueous polyvinylpyrrolidone photoresists for cathode ray tubes

Aqueous photoresists that are capable of higher resolutions than are currently employed by the cathode ray tube (CRT) industry were developed by combining photoactivators, which activate at shorter UV wavelengths with polyvinylpyrrolidone (PVP). Two photoactivators were synthesized: 4,4′‐diazido‐2,2′‐biphenyl disodium disulfonate (DABP), which has a maximum absorbance at 264 nm, and 4,4′‐diazido‐2,2′‐biphenylethane disodium disulfonate (DABPE), which has a maximum absorbance at 258 nm. The PVP/DABP and PVP/DABPE photoresists successfully imaged a pattern with resolution as small as 4.4 μm with photoactivator concentrations greater than 20% of the PVP concentration. Addition of silane and emulgen greatly improved the performance of the photoresists with more uniform coatings of thicknesses of up to 1.4 μm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1637–1644, 2006     

Dynamic mechanical behavior of chlorosubstituted derivatives of poly(ethyl methacrylate) and poly(ethyl acrylate)

A freely oscillating torsional pendulum was used in the investigation of the influence of trichloroethyl, tetrachloroethyl, trichloromethoxyethyl, and trichloroethoxyethyl side groups on the molecular mobility in the glassy state and on the glass transition temperature of poly(meth)acrylates. All the polymers under study, which may be used as fire retardants, exhibit a simple relaxation behavior. While the parameters of the low-temperature and secondary relaxation process in the glassy state are not noticeably affected by the substituents used, the glass transition temperature T_g, increases with rising polarity and volume of side chains. The increase is larger in the series of polyacrylates, so that differences in the softening temperatures of polymethacrylates and polyacrylates having the same side chains decrease considerably with growing substitution.     

Experiments on the suspension of spheres in inclined tubes—II. Suspension by air

Data are presented on the suspension of single spheres by air, in inclined tubes ranging in diameter from 0·97 to 5·13 cm. The angle of inclination of the tubes to the horizontal axis varied from 0 to 90°. The data, which relate the pressure drop and suspending velocity to the geometric and physical parameters of the system, are compared with data generated previously using water as the suspending fluid. Dimensionless expressions are presented which correlate both sets of data for pressure drop and suspending velocity in terms of sphere/tube diameter ratio, tube diameter, density of solid and fluid and angle of inclination of the tube.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.     

Stretching and deformation vibrations of CH2, C(CH3) and O(CH3) groups of poly(methyl methacrylate)

Infrared and Raman spectra of atactic PMMA and infrared spectra of stereoregular PMMA and of its four deuterated derivatives

, were measured. They were used to assign the bands of stretching and deformation vibrations of CH₂, CCH₃ and OCH₃ groups in the infrared and Raman spectra and to discuss the effect of stereoregularity on these bands in the infrared spectra.