Low-voltage low-power fully-integratable automatic gain controls

This paper discusses the design of low-voltage low-power fully-integratable automatic gain controls. Four different AGCs are presented, all consisting of three elementary building blocks: a controlled amplifier, a comparator and a voltage follower. Their design is treated separately. As an example, the final section describes an automatic gain control for hearing instruments, realized in a bipolar process.     

Accuracy of carotid strain estimates from ultrasonic wall tracking: a study based on multiphysics simulations and in vivo data

We used a multiphysics model to assess the accuracy of carotid strain estimates derived from a 1-D ultrasonic wall tracking algorithm. The presented tool integrates fluid-structure interaction (FSI) simulations with an ultrasound simulator (Field II), which allows comparison of the ultrasound (US) images with a ground truth. Field II represents tissue as random points on which US waves reflect and whose position can be updated based on the flow field and vessel wall deformation from FSI. We simulated the RF-signal of a patient-specific carotid bifurcation, including the blood pool as well as the vessel wall and surrounding tissue. Distension estimates were obtained from a wall tracking algorithm using tracking points at various depths within the wall, and further processed to assess radial and circumferential strain. The simulated data demonstrated that circumferential strain can be estimated with reasonable accuracy (especially for the common carotid artery and at the lumen-intima and media-adventitia interface), but the technique does not allow to reliably assess intra-arterial radial strain. These findings were supported by in vivo data of 10 healthy adults, showing similar circumferential and radial strain profiles throughout the arterial wall. We concluded that these deviations are present due to the complex 3-D vessel wall deformation, the presence of specular reflections and, to a lesser extent, the spatially varying beam profile, with the error depending on the phase in the cardiac cycle and the scanning location.     

Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

A Scalable Architecture for MPEG-4 Wavelet Quantization

Wavelet-based image compression has been adopted in MPEG-4 for visual texture coding. All wavelet quantization schemes in MPEG-4—Single Quantization (SQ), Multiple Quantization (MQ) and Bi-level Quantization—use Embedded Zero Tree (EZT) coding followed by an adaptive arithmetic coder for the compression and quantization of a wavelet image. This paper presents the OZONE chip, a dedicated hardware coprocessor for EZT and arithmetic coding. Realized in a 0.5 m CMOS technology and operating at 32 MHz, the EZT coder is capable of processing up to 25.6 Mega pixel-bitplanes per second. This is equivalent to the lossless compression of 31.6 8-bit grayscale CIF images (352 × 288) per second. The adaptive arithmetic coder processes up to 10 Mbit per second. The combination of the performance of the EZT coder and the arithmetic coder allows the OZONE to perform visual-lossless compression of more than 30 CIF images per second. Due to its novel and scalable architecture, parallel operation of multiple OZONEs is supported. The OZONE functionality is demonstrated on a PC-based compression system.     

A Provable Billing Protocol on the Current UMTS

This paper proposes a simple method that equips UMTS-based telecom companies with a mechanism to prove the records on mobile users’ phone bills. In the history of mobile phone communication, we have seen countless unsettled disputes where the mobile user disagrees with the telecom company either on the calling time or on the duration, or even on whether or not a call was actually made. In this paper, a provable billing protocol will be presented that can effectively solve disagreements between the two parties. Equipped with a non-repudiation function, the proposed protocol enables the service provider to hold on to the solid proofs as to exactly when and to which number a mobile phone user made a call so that the mobile user cannot deny; at the same time, the mobile user also gets to have his/her own share of proofs as to when and how the mobile services were accessed, so that the bill can be double checked to make sure nothing goes wrong. And, to make it even better, this new protocol is perfectly compatible with the standard UMTS protocol and is therefore readily applicable to the current mobile phone communication environments.     

Measuring the External Quantum Efficiency of Two‐Terminal Polymer Tandem Solar Cells

Tandem configurations, in which two cells are stacked and connected in series, offer a viable approach to further increase the power conversion efficiency (PCE) of organic solar cells. To enable the future rational design of new materials it is important to accurately assess the contributions of individual subcells. Such accurate measurement of the external quantum efficiency (EQE) of the subcells of two‐terminal organic or polymer tandem solar cells poses specific challenges, caused by two characteristics of these cells, i.e. a sub‐linear light intensity dependence of the current and a field‐assisted charge collection. These properties necessitate that EQE experiments are carried out under representative illumination conditions and electrical bias to maintain short‐circuit conditions for the addressed subcell. We describe a method to determine the magnitudes of the bias illumination and bias voltage during EQE measurements, based on the behavior of single junction cells and optical modeling. The short‐circuit current densities of the subcells obtained by convolution of the EQE with the AM1.5G solar spectrum are consistent with those obtained from optical modeling and correctly predict the current density–voltage characteristics of the tandem cell under AM1.5G conditions.     

Optimization Methods for Post-Bond Testing of 3D Stacked ICs

Testing of three-dimensional (3D) stacked ICs (SICs) is starting to receive considerable attention in the semiconductor industry. Since the die-stacking steps of thinning, alignment, and bonding can introduce defects, there may be a need to test multiple subsequent partial stacks during 3D assembly. We address the problem of test-architecture optimization for 3D stacked ICs to minimize overall test time when either the complete stack only, or the complete stack and multiple partial stacks, need to be tested. A general solution to this problem provides several options for 3D stack testing in a unified framework. We show that optimal test-architecture solutions and test schedules for multiple test insertions are different from their counterparts for a single final stack test. In addition, we present optimization techniques for the testing of TSVs and die-external logic in combination with the dies in the stack.     

UTRA/FDD RF Transceiver Requirements

Unified RF requirements are derived for an UMTS Terrestrial RadioAccess/Frequency Division Duplex (UTRA/FDD) compliant mobile transceiver. Aset of transceiver requirements are proposed with consideration to systemissues including duplex aspects. From these design-compatible requirements areproposed for each functional block in the transceiver.     

边缘接入智能化

MMAP(多功能、多业务接入平台)集成了光纤传输和接入技术,使接入网和城域网(MAN)融合在一起。