Humidity Dependence of the Fatigue of High-Strength Fused Silica Optical Fibers

Strength and dynamic fatigue behavior of silica fibers has been measured as a function of ambient humidity. Bare and polymer-coated fibers were compared to determine the influence of the coating. The results verify earlier work that suggests the degradation reaction is approximately second order with respect to humidity. However, we verify this result using rigorous data analysis techniques and, unlike the earlier work, the result is shown to be independent of the form of the kinetic model for crack growth. Trends in the calculated fatigue parameters illustrate that a simple exponential crack growth law best describes the humidity data. No significant differences were found between coated and bare fibers, provided the coated fibers were properly equilibrated. A data analysis methodology is given for obtaining valid reaction orders independently of the crack growth law form.     

A Novel Processing Route to Control Grain Growth in Submicrometer Alumina Compacts

A novel processing procedure for significantly suppressing grain growth in submicrometer alumina compacts has been developed and implemented with the intent of ultimately using the same processing route to control grain size in nanophase alumina compacts. In this study, partially sintered alumina pellets made from 0.5 µm starting powders are altered by the chemical infiltration of Si₃N₄. The control and infiltrated pellets are then heated to 1650°C for 4 h. The fully sintered pellets are approximately 97% dense. Suppressed grain growth is observed in the infiltrated pellets. The average grain size in the control pellets after densification is 4.2 and 1.2 µm in the infiltrated pellets. Depth of infiltration is measured using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Depending on the specific infiltration conditions used, the outer 15-50% of the infiltrated pellets exhibit a graded microstructure consisting of a region of abnormal grain growth and a region of suppressed grain growth. Abnormal grain growth is visible on the outer surfaces of the infiltrated pellets where a relatively high ratio of Si to N is present. Further into the pellet, after some depletion of the Si source gas has occurred, regions of suppressed grain growth are apparent. Based on these results, an infiltration profile is determined. A mathematical model is developed to describe the infiltration process and to determine optimal infiltration conditions. High-resolution electron microscopy (HREM), energy dispersive spectroscopy (EDS), electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS) are used to study the infiltrated samples.     

Surface Roughening and Unstable Neck Formation in Faceted Particles: I, Experimental Results and Mechanisms

Experimental in situ TEM results described by Rankin and Boatner are surprising because they show initial neck formation between two isolated MgO particles, followed by neck rupture. A quantitative assessment of the original images shows that initial neck growth corresponds to material removed from the rounded edges which contact the neck, and that neck rupture transfers material directly from the neck to the adjacent faceted faces. During the initial neck growth process surface diffusion along the rounded edges of the crystals is apparently the dominant mass transport mechanism, and material is not transferred to the faceted faces because of the energy barrier associated with forming a new atomic layer on top of a faceted surface. This energy barrier can apparently be overcome when a curvature reversal at a facet/rough surface boundary creates a step which makes it possible to add one or more new atomic layers to the faceted face(s). This can move material away from the neck, and thus lead to neck rupture.     

Screening catalytic lipase activities with an analytical supercritical fluid extractor

Two different screenings of several commercial lipases were performed to find a lipase with superior performance for the conversion of lipid moieties to their fatty acid methyl ester (FAME) derivatives under supercritical conditions. The first screening was done under hydrolytic conditions in a buffer. The second screening was done under supercritical conditions with CO₂, utilizing some of the same lipases for the methanolysis of different lipids. For the substrates studied, there was a significant difference in lipase activity under the two above conditions. Significant hydrolytic activity was demonstrated for three different lipid types (triglycerides, sterols, and phospholipids) with Lipase PS30, but when the same lipase was immobilized on an Accurel carrier (polypropylene), the activity decreased considerably. The opposite was found for Lipase G, which showed strong activity when immobilized and under supercritical conditions. Furthermore, Chirozyme L-1 was superior under supercritical conditions. The altered substrate specificity that some of these lipases show in supercritical CO₂ suggests several interesting synthetic options and applications under these conditions.     

Separation of Americium from Europium using Camphor-BisTriazinyl Pyridine: A Fundamental Study

Among the different components present in spent nuclear fuel, long-lived trivalent actinides are particularly difficult to separate from the shorter-lived lanthanide fission products due to their similar chemical properties. Selective extraction of americium from acidic solution (up to 2M HNO₃) containing tenth molar quantities of lanthanides has been achieved using neutral pyridine-based ligands dissolved in polar diluents. Nitrogen-based Bis Triazinyl Pyridine (BTP) ligands are desirable for both their excellent An/Ln selectivity and incinerability. Results pertaining to ligand solubility, kinetics, hydrolytic stability, and extraction performance in various nitric acid environments are presented.     

The ({beta}{alpha})8 glycosidases: sequence and structure analyses suggest distant evolutionary relationships

There are currently at least nine distinct glycosidase sequencefamilies which are all known to adopt a TIM barrel fold [Henrissat,B.and Davies,G. (1997) Curr. Opin. Struct. Biol., 7, 637–644].To explore the relationships between these enzymes and theirevolution, comprehensive sequence and structure comparisonswere performed, generating four distinct clusters. The firstcluster, S1, comprises the     

Past and present technocratic solutions to teaching literacy: implications for New Zealand primary teachers and literacy programmes

The late 1990s have seen a resurgence of the arguments for a skills-focused literacy instruction programme. This article explores the New Zealand-based public and professional debates surrounding the promotion of a technocratic approach to literacy instruction during the 1940s and 1950s, and the reoccurrence of the reading debate in late 1990s. In the early stages of both literacy crises, the professional competency of education officials and primary teachers was attacked by business interests and their political allies. The aftermath of the earlier crisis highlights the failure of this mechanistic and 'culture neutral' view of literacy instruction to cater for Maori children. The outcomes of the earlier debate signals a need avoid a similar conclusion to the current debate by adopting a broader approach to literacy instruction in the new millennium if language and literacy instruction programmes are to cater for complex cultural contexts, and the changing technological environments     

Immuno-SEM characterization of developing bovine cartilage

Collagen is a vital material in the tissues of living organisms. Found almost everywhere in the human body, collagen is important in connective tissues, bone growth, and cartilage. Collagen XI makes up a very small portion of the cartilaginous tissue; however, it plays a key role in cartilaginous tissue. Collagen XI and two collagen XI isoforms, V1b and V2, are critical in the ossification process. The location of collagen XI, V1b, V2, and their specific functions in the ossification process within developing bovine cartilage are not well characterized. In this work, the location of collagens I, II, XI and two collagen XI isoforms, V1b and V2, present in developing bovine cartilage are investigated using the immuno-SEM technique. The results for the locations of collagen I and II indicate a high level of consistency with previous work, thus showing that the technique of immuno-SEM can be used with confidence to determine the location of various collagen types within cartilaginous and mineralized tissue. This work has shown that collagen XI is present in the lower hypertrophic region and also in a pericellular arrangement, within about two microns of cell walls, throughout the cartilaginous tissue. V1b is expressed in the articular surface, mineralized region, resting zone, and the distal edge of the diaphysis. The V2 isoform is most strongly expressed in areas of newly forming cartilage, and disappears with chondrocyte maturation. V2 is present in the distal edge of the epiphysis, as well as in mineralized tissue. Collagen XI and two of its isoforms, V1b and V2, are thought to play a critical role in the ossification process. However, this role is not well understood, and is still being characterized. The detection of collagen XI and two of its isoforms in the osteo-chondral junction as well as at a joint surface further point to collagen XI, V1b, and V2 playing a vital role in the ossification process, and warrants further research as to their specific function within the ossification process.     

黄民奇：这是“制程工业”!

从代理、到自己投入半导体尖端制程设备研发，汉辰科技董事长黄民奇，日前在捐赠先进半导体制程设备予台湾国研院奈米组件实验室的仪式后，很多人都说，半导体尖端制程设备研发是精密机械工业，但他认为，应该称之为“制程工业”才对!