Continuous glass-fiber reinforced nylon 6 by using a new impregnation die

This paper describes a process for the manufacture of thermoplastic composites reinforced with continuous fibers and the equipment for producing such a product. The process makes it possible to expand and reconsolidate the fibers of rovings by passing them into the impregnation die filled with molten thermoplastic. The die consists of three rollers and numerous pins fixed on the roller surfaces over which the roving is drawn under tension. The material chosen to illustrate the die process is a glass-fiber reinforced nylon-6, PA6. The void content and mechanical properties were measured to investigate the influence of processing variables on properties. These process experiences indicated that poor fiber resin impregnation and fiber damage, due to harsh prepreg fabrication, result in low values for longitudinal tensile strength and impact properties. However, the composites manufactured by this technique show a significant improvement in mechanical properties over conventionally prepared thermoplastic composites.     

A comparative study of the antithrombotic effect through activated endothelium of garlic powder and tomato extracts using a rodent model of collagen and epinephrine induced thrombosis

Food Science and Biotechnology - In this study, garlic powder, tomato extract and a mixture of both were analyzed for anti-thrombotic effects using a collagen and epinephrine induced thrombosis...     

Rapid Food Product Analysis by Surface Acoustic Wave Nebulization Coupled Mass Spectrometry

Rapid food product analysis is of great interest for quality control and assurance during the production process. Conventional quality control protocols require time and labor-intensive sample preparation for analysis by state-of-the-art analytical methods. To reduce overall cost and facilitate rapid qualitative assessments, food products need to be tested with minimal sample preparation. We present a novel and simple method for assessing food product compositions by mass spectrometry using a novel surface acoustic wave nebulization method. This method provides significant advantages over conventional methods requiring no pumps, capillaries, or additional chemicals to enhance ionization for mass spectrometric analysis. In addition, the surface acoustic wave nebulization–mass spectrometry method is ideal for rapid analysis and to investigate certain compounds by using the mass spectra as a type of species-specific fingerprint analysis. We present for the first time surface acoustic wave nebulization-generated mass spectra of a variety of fermented food products from a small selection of vinegars, wines, and beers.     

Antioxidant activity of enzymatic extracts from the brown seaweed Undaria pinnatifida by electron spin resonance spectroscopy

Enzyme assisted extraction of Undaria pinnatifida was performed using five proteases (Alcalase, Flavourzyme, Neutrase, Trypsin and Protamex) and six carbohydrases (AMG, Dextrozyme, Maltogenase, Promozyme, Viscozyme and Celluclast) in order to acquire extracts rich in antioxidants. Antioxidant activity of the extracts was investigated using electron spin resonance (ESR) spectroscopy on 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl and superoxide radicals. Extracts exhibited strong radical scavenging activity on DPPH and hydroxyl radical, and activity increased with increasing extract concentration. In contrast to DPPH and hydroxyl radical scavenging activity, extracts showed weak scavenging activity on superoxide radical. Extracts exhibited weak radical scavenging activity compared to vitamin C as a reference compound. However, they are still a good source of antioxidant materials that are safe for consumption and show water-soluble properties.     

Formation of intermetallic compound at interface between rare earth elements and ferritic-martensitic steel by fuel cladding chemical interaction

The intermetallic compounds formation at interface between rare earth elements and clad material were investigated to demonstrate the effects of rare earth elements on fuel-cladding chemical interaction(FCCI)behavior.Mischmetal(70Ce-30La)and Nd were prepared as rare earth elements.Diffusion couple testing was performed on the rare earth elements and cladding(9Cr2W steel)near the operation temperature of(sodium-cooled fast reactor)SFR fuel.The performance of a diffusion barrier consisting of Zr and V metallic foil against the rare earth elements was also evaluated.Our results showed that Ce and Nd in the rare earth elements and Fe in the clad material interdiffused and reacted to form intermetallic species according to the parabolic rate law,describing the migration of the rare earth element.The diffusion of Fe limited the reaction progress such that the entire process was governed by the cubic rate law.Rare earth materials could be used as a surrogate for high burnup metallic fuels,and the performance of the barrier material was demonstrated to be effective.     

A predictive model for the effect of temperature and predrying treatments in reducing Listeria monocytogenes populations during drying of beef jerky

The objective of this study was to model the effect of drying temperatures (52, 57, and 63 degrees C) and predrying treatments on the inactivation of Listeria monocytogenes on beef jerky. Before drying, beef slices were inoculated with a 10-strain composite of L. monocytogenes and then treated with the following: (i) nothing (C), (ii) traditional marinade (M), or (iii) dipping in 5% acetic acid solution for 10 min, followed by M (AM). In addition, sequential stresses (exposure to 10% NaCl, followed by an adjustment of the pH to 5.0 and, subsequently, a water bath at 45 degrees C) were applied to the inocula before beef contamination and drying at 63 degrees C. Surviving L. monocytogenes were determined on tryptic soy agar plus 0.6% yeast extract (TSAYE) and on PALCAM agar at 0, 2, 4, 6, 8, and 10 h during drying. Data were modeled by a linear regression (treatment AM) and a logistic-based equation capable of fitting biphasic inactivation curves without initial shoulder (treatments C and M). The total log reductions expressed as the CFU per square centimeter of L. monocytogenes (3.9 to 5.1) for the samples treated with M (3.5 to 5.4) when compared with C were similar, whereas AM-treated samples had higher (6.1 to 6.8) reductions. All survival curves were characterized by an initial rapid decrease in populations within the first 2 h, which was followed by a secondary death phase at a lower rate. No significant (P > or = 0.05) differences in inactivation were observed due to drying temperatures in the range (52 to 63 degrees C) tested. Inactivation differences between recovered counts of stressed and unstressed cells were significant (P < 0.05) in PALCAM but not in TSAYE. The acidified predrying treatment (AM) had higher pathogen inactivation during drying than other treatments, regardless of drying temperature. The models developed may be useful in designing effective drying processes for beef jerky.     

Identification of pure component spectra by independent component analysis in glucose prediction based on mid-infrared spectroscopy

We present a method for glucose prediction from mid-IR spectra by independent component analysis (ICA). This method is able to identify pure, or individual, absorption spectra of constituent components from the mixture spectra without a priori knowledge of the mixture. This method was tested with a two-component system consisting of an aqueous solution of both glucose and sucrose, which exhibit distinct but closely overlapped spectra. ICA combined with principal component analysis was able to identify a spectrum for each component, the correct number of components, and the concentrations of the components in the mixture. This method does not need a calibration process and is advantageous in noninvasive glucose monitoring since expensive and time-consuming clinical tests for data calibration are not required.     

Nanometer-scale chemical heterogeneities of black carbon materials and their impacts on PCB sorption properties: soft X-ray spectromicroscopy study

Synchrotron-based soft X-ray spectromicroscopy was used to probe nanometer-scale chemical heterogeneities of black carbon (BC) materials, including anthracite coal, coke, and activated carbon (AC), and to study their impact on the partitioning of one type of polychlorinated biphenyls (PCB-166: 2,3,4,4',5,6 hexachloro biphenyl) onto AC particles. Various carbon species (e.g., aromatic, ketonic/ phenolic, and carboxylic functional groups) were found in all of the BC materials examined, and impurities (e.g., carbonate and potassium ions in anthracite coal) were identified in nanometer-scale regions of these samples. We show that these chemical heterogeneities in AC particles influence their sorption of hydrophobic organic compounds (HOCs). PCB-166 was found to accumulate preferentially on AC particles with the highest content of aromatic functionalities. These new findings from X-ray spectromicroscopy have the following implications for the role of BC materials in the environment: (1) the functional groups of BC materials vary on a 25-nanometer scale, and so does the abundance of the HOCs; (2) molecular-level characterization of HOC sorption preferences on AC will lead to an improved understanding of AC sorption properties for the remediation of HOCs in soils and sediments.