Stiffness alterations of single cells induced by UV in the presence of nanoTiO2

Nanocrystalline titanium dioxide (nanoTiO2) has been reported to generate reactive oxygen species (ROS) under UV illumination. In our studies, changes in mechanical properties of human skin fibroblasts, exposed to the oxidative stress induced in the presence of nanoTiO2 and UV light, were studied using atomic force microscopy (AFM). The exposure of cells to the action of ROS was performed at low TiO2 concentration (4 microg/mL) and under illumination with low-intensity UVA (8 and 20 mW/cm2) or UVC (0.1 mW/ cm2). AFM measurements of the cell stiffness were carried out immediately after exposure of cells to the oxidative stress. The data suggest that under illumination with low-intensity UVA nanoTiO2 generates ROS, which, in turn, damage cellular and subcellular structures. This process was detected by AFM as a marked drop in the cellular stiffness of ca. 30-75%, which occurred rapidly, in the time frame of 1 min. The photo-oxidative stress inducing the decrease of cell stiffness was cancelled in the presence of a well-established antioxidant, beta-carotene. The results highlight the sensitivity of AFM to detect early changes in mechanical properties of cells exposed to oxidative stress.     

Relaxation processes and intermolecular interactions in PVME hydrogels in sub-zero temperatures: Glass transition and pre-melting of ice

The phase transition observed by various methods in poly(vinyl methyl ether)/water systems at around 18 °C has been assigned by some investigators to the pre-melting of water and by others to a glass transition of the polymer. In this study, broadband dielectric spectroscopy and temperature modulated differential scanning calorimetry were used to identify this transition in radiationally crosslinked poly(vinyl methyl ether) hydrogels, as well as to analyse sub-zero relaxation processes in such a three-phase (polymer/ice/liquid water) system. The process at 18 °C was related to the pre-melting of water induced by the segmental motions of the polymer; however, it was seen to be one transition due to the cooperative motions of both compounds. The atypical (two regimes) temperature dependence of the segmental motion process was observed and was related to confinement of the polymer chains between ice clusters below approximately ?24 °C; furthermore, the main dielectric process of hexagonal ice was identified and a Maxwell-Wagner effect was observed.     

Characterization of the surface layers formed on titanium by plasma electrolytic oxidation

This paper is concerned with the surface modification of titanium by the PEO method (plasma electrolytic oxidation) in the solutions which contain Ca, P, Si and Na. The chemical composition of the thus formed surface layers was examined by XPS and EDS. The morphology of the surface was observed by SEM. The phase composition was determined by X-ray diffraction (XRD). The adhesive strength of the oxide layers was evaluated by the scratch-test. The corrosion resistance was determined in a simulated body fluid (SBF) at a temperature of 37 °C by electrochemical methods for various exposure times.The oxide layers obtained were porous and enriched with Ca, P, Si and Na and their properties depended on the electrolyte solution and the parameters of the oxidation process. The results of the electrochemical examinations show that the surface modification by PEO does not worsen the corrosion resistance of titanium after a 13 h exposure in SBF. The electrochemical impedance spectroscopy (EIS) results indicate that the surface layers have a complex structure and that their electric properties undergo changes during long-term exposures in SBF.     

Acoustic emission for detecting deterioration of capacitors under aging

There is continuous pressure on production cost reduction of foil-based capacitors, widely used in domestic appliance. Therefore, investigation of the deterioration mechanisms within capacitors is important to reduce their production costs at maintained reliability. These mechanisms were observed in two capacitors batches of classes Y2 (27 nF) and X2 (470 nF). An acoustic emission signal was observed when the capacitors were polarized by excessive voltage. This signal is induced by partial discharges that can lead to capacitor destruction. Next, the capacitors were aged at elevated temperature and also in presence of excessive polarization. We conclude that the acoustic emission signal can predict deterioration of dielectric insulation resistance in capacitors of class Y2. The observed destruction of capacitor of class X2 is caused mainly by detachment of the sprayed metalized contacts that is induced by overheating during partial discharges sparking.     

Thermal properties of poly(pivalolactone)

Polypivalolactone (PPVL) is a highly crystalline polyester formed either by nucleophilic or electrophilic ring-opening polymerization of 2,2-dimethyl-β-propiolactone, commonly known as pivalolactone (PVL). The thermal properties and crystallization kinetics of the polymer formed under reaction injection molding (RIM) conditions were studied. The crystallization kinetics of PPVL were measured using differential scanning calorimetry (DSC), and Avrami theory was used to interpret the bulk crystallization kinetics. A comparison was made with commercially prepared PPVL. The kinetics data indicate laboratory prepared PPVL, which is of lower molecular weight, has similar crystallization rates compared to the higher molecular weight commercial material. The kinetics data also indicate the rate of crystallization is relatively rapid overall for PPVL, with low activation energies of crystallization. The calorimetric studies also utilized DSC and simultaneous ther-mogravimetric analysis/differential scanning calorimetry (TGA/DSC). Thermal analysis showed a clear difference in melting behavior between high and low molecular weight material, possibly a reflection of the presence of the α and γ-crystal forms of the polymer.     

s-Wave vs.d -Wave Superconductivity in the Two-Dimensional Hubbard Model

The anisotropic superconductivity has been considered in the two-dimensional Hubbard model. We allow for on and off-site intralayer Cooper pairs. Interlayer momentum-conserving Josephson tunneling which couples adjacent layers has been taken into account. The meanfield solution for the superconducting transition temperature demonstrates the competition between local Coulomb repulsion and interlayer tunneling in thes-wave channel. This competition leads to the mixedsd superconducting state at low doping. We also demonstrate thatc-phonon-assisted transitions between intra and interlayer states can effectively give rise to momentum-conserving Josephson tunneling.     

DRYING OF WASTE SLUDGES IN A FLUIDIZED BED DRYER WITH A MIXER

Sludge wastes are a very attractive source of many valuable compounds such as nitrogen, phosphorus and organic matter. One of the interesting methods of sludge utilization is dewatering and drying. In this paper some problems of drying of two types of sludge wastes of different form and origin are presented. One of the sludges—a brewery by-product— contains spent grain suspension of brewer's yeast and diatomaceous earth. The second one is a by-product of a biotechnological process which contains mainly lime, protein, many microelements and some microorganisms. Moisture content of both sludges is about 65-70% w/w. The laboratory experiments of sludge drying in the fluidized bed dryer with a mixer, fluidized bed hydrodynamics, and the effects and advantages of sludge drying are shown.     

Optical properties of the Al2O3/SiO2 and Al2O3/HfO2/SiO2 antireflective coatings

Investigations of bilayer and trilayer Al₂O₃/SiO₂ and Al₂O₃/HfO₂/SiO₂ antireflective coatings are presented in this paper. The oxide films were deposited on a heated quartz glass by e-gun evaporation in a vacuum of 5 × 10^?3 [Pa] in the presence of oxygen. Depositions were performed at three different temperatures of the substrates: 100 °C, 200 °C and 300 °C. The coatings were deposited onto optical quartz glass (Corning HPFS). The thickness and deposition rate were controlled with Inficon XTC/2 thickness measuring system. Deposition rate was equal to 0.6 nm/s for Al₂O₃, 0.6 nm ? 0.8 nm/s for HfO₂ and 0.6 nm/s for SiO₂. Simulations leading to optimization of the thin film thickness and the experimental results of optical measurements, which were carried out during and after the deposition process, have been presented. The optical thickness values, obtained from the measurements performed during the deposition process were as follows: 78 nm/78 nm for Al₂O₃/SiO₂ and 78 nm/156 nm/78 nm for Al₂O₃/HfO₂/SiO₂. The results were then checked by ellipsometric technique. Reflectance of the films depended on the substrate temperature during the deposition process. Starting from 240 nm to the beginning of visible region, the average reflectance of the trilayer system was below 1 % and for the bilayer, minima of the reflectance were equal to 1.6 %, 1.15 % and 0.8 % for deposition temperatures of 100 °C, 200 °C and 300 °C, respectively.