DRYING OF WASTE SLUDGES IN A FLUIDIZED BED DRYER WITH A MIXER

Sludge wastes are a very attractive source of many valuable compounds such as nitrogen, phosphorus and organic matter. One of the interesting methods of sludge utilization is dewatering and drying. In this paper some problems of drying of two types of sludge wastes of different form and origin are presented. One of the sludges—a brewery by-product— contains spent grain suspension of brewer's yeast and diatomaceous earth. The second one is a by-product of a biotechnological process which contains mainly lime, protein, many microelements and some microorganisms. Moisture content of both sludges is about 65-70% w/w. The laboratory experiments of sludge drying in the fluidized bed dryer with a mixer, fluidized bed hydrodynamics, and the effects and advantages of sludge drying are shown.     

Optical properties of the Al2O3/SiO2 and Al2O3/HfO2/SiO2 antireflective coatings

Investigations of bilayer and trilayer Al₂O₃/SiO₂ and Al₂O₃/HfO₂/SiO₂ antireflective coatings are presented in this paper. The oxide films were deposited on a heated quartz glass by e-gun evaporation in a vacuum of 5 × 10^?3 [Pa] in the presence of oxygen. Depositions were performed at three different temperatures of the substrates: 100 °C, 200 °C and 300 °C. The coatings were deposited onto optical quartz glass (Corning HPFS). The thickness and deposition rate were controlled with Inficon XTC/2 thickness measuring system. Deposition rate was equal to 0.6 nm/s for Al₂O₃, 0.6 nm ? 0.8 nm/s for HfO₂ and 0.6 nm/s for SiO₂. Simulations leading to optimization of the thin film thickness and the experimental results of optical measurements, which were carried out during and after the deposition process, have been presented. The optical thickness values, obtained from the measurements performed during the deposition process were as follows: 78 nm/78 nm for Al₂O₃/SiO₂ and 78 nm/156 nm/78 nm for Al₂O₃/HfO₂/SiO₂. The results were then checked by ellipsometric technique. Reflectance of the films depended on the substrate temperature during the deposition process. Starting from 240 nm to the beginning of visible region, the average reflectance of the trilayer system was below 1 % and for the bilayer, minima of the reflectance were equal to 1.6 %, 1.15 % and 0.8 % for deposition temperatures of 100 °C, 200 °C and 300 °C, respectively.     

Support for argument structures review and assessment

Argument structures are commonly used to develop and present cases for safety, security and for other properties of systems. Such structures tend to grow excessively, which causes problems with their review and assessment. Two issues are of particular interest: (1) systematic and explicit assessment of the compelling power of an argument, and (2) communication of the result of such an assessment to relevant recipients. The paper presents a solution to these problems. The method of Visual Assessment of Arguments (VAA), being this solution, is based on the Dempster-Shafer theory of evidence applied to the assessment of the strength of arguments, and a visual mechanism of issuing and presenting assessments, supported by the so-called opinion triangle. In the paper we explain theoretical grounding for the method and provide guidance on its application. The results of some validation experiments are also presented.     

Zn-Ca-Fe氧化物催化水解微晶纤维素

以尿素为沉淀剂制备了一系列复合金属沉淀物,将其在高温条件下煅烧获得一系列复合金属氧化物固体催化剂,并将其用于催化微晶纤维素的水解反应;考察了反应温度、反应时间、搅拌转速、催化剂用量和微晶纤维素用量对反应的影响。实验结果表明,在反应温度160℃、反应时间20 h、搅拌转速400 r/mnin、微晶纤维素2.0 g、Zn-Ca-Fe氧化物0.9 g和H_2O 200 mL的条件下,微晶纤维素的转化率高达42.56%,葡萄糖的收率为69.20%,且微晶纤维素水解液为中性溶液。在相同反应条件下,Zn-Ca-Fe氧化物可重复使用5次,其催化活性无明显降低。     

River, reservoir and lake sediment contamination by heavy metals downstream from urban areas of Switzerland

This paper quantifies sediment contamination by heavy metals in four reservoirs and one lake located downstream from major urban areas in Switzerland. The waterbodies include the Wettingen Reservoir (located on the Limmat River downstream from Zürich), the Klingnau Reservoir (on the lower Aare River), the Wohlen Reservoir (downstream from Berne), the Verbois Reservoir (downstream from Geneva) and Vidy Bay (Lake Geneva, city of Lausanne). For all sediment cores and contaminants, a trend is observed from high contaminant values in the lower part of the cores, decreasing to lower concentrations in the upper part of the cores. However, for each site and each element, specific features are recognized. Applying the criteria of the Swiss ordinance on soil protection, all sediment cores must be classified as contaminated by one or more contaminants and at variable levels. From these data, it is concluded that: reservoirs and lakes located downstream from major urban centres in Switzerland have accumulated significant volumes of contaminated sediments in the past, representing the largest, but not the most intensely, contaminated sites on a national scale; the main environmental risk is remobilization of the contaminants and their return to the food chain, particularly by infiltration into the groundwater; and although the processes of remobilization are identified, the conditions of occurrence and the amplitude of the processes are still poorly known. Different options of reservoir and lake sediment management also are discussed and further research topics defined.     

Application of the SIMS Method in Studies of Cr Segregation in Cr-Doped CoO: I, Aspects of Quantitative Analysis

Aspects of calibration of intensities of SIMS secondary ions vs concentration as well as sputtering time vs depth are considered for Cr-doped CoO. Advantages and limitations of the SIMS method in quantitative analysis of segregation-induced concentration profiles in oxide crystals are discussed. The studies indicate a substantial effect due to charging the surface during sputtering. The depth calibration was performed by using the Ta₂O₅/Ta system as a standard. Good depth resolution was revealed. The calibration dependence of Cr intensities on concentration is characterized by a wide scatter of data caused by charging the surface. Very good shape reproducibility of the intensity ratio vs depth profiles was revealed. Therefore, normalized intensity ratios can be used for calibration.     

“Softer” optimization and control models via fuzzy linguistic quantifiers

A “softening” of a basic formulation of multicriterion optimization and control (multistage decision making) is presented. For optimization, instead of seeking an optimal solution that best satisfies all the fuzzy objectives as has been done so far, we seek an optimal solution that best satisfies most, much more than 50%, etc. (a linguistic quantifier, in general) of the fuzzy objectives. For control, we seek in turn an optimal sequence of controls that best satisfies the fuzzy constraints and fuzzy goals at most, much more than 50%, etc. of the control stages. A calculus of linguistically quantified statements based upon fuzzy sets and possibility theory is used. Some applications to softer evidence aggregation in expert systems are also indicated.     

A new method of determination of the permeability of vapors of volatile liquid substances through polymer membranes

A new apparatus for the determination of vapor permeability of volatile liquid substances through polymer membranes has been described. The permeability of the vapor is calculated from the measurements of the depression rate of the liquid meniscus in a calibrated capillary tube. The conditions of the measurements by means of the described method are very close to those of the average and practical application of foils. The method is characterized by a simple design of the apparatus, easy handling, and simplicity of the determinations, so it may constitute the basis of vapor permeability determination standards. The results obtained by means of the described method were compared with those derived from the partition cell method.     

Dilatometric studies of the phase transitions of sodium potassium tartrate tetrahydrate (RS)

Temperature dependence of the thermal expansion coefficients of Rochelle salt (RS) crystals for the basic crystallographic directions have been measured in the temperature range from 100 K to 308 K by an air-capacitor dilatometer. Anomalies of thermal expansion coefficients at about 210 K and 153 K have been observed, besides these corresponding to known ferroelectric phase transitions at the temperatures of 255 and 297 K.     

Kalman filtering of traffic fluctuations for real-time network management

Discrete- time stochastic models of sequential traffic records in telephone networks are considered. They appear to be well suited for a use of the Kaiman filter. A version of the filtering algorithm is adopted to deal with traffic fluctuations. The overall approach is tested against the real data gathered by the supervisor of the French toll network. The adaptive traffic estimator is inserted into a simulator of a testbed network operated in the urban zone of Paris. The traffic estimations provided by the filter are used to decide an overflow hierarchy.