DGT measurement of dissolved aluminum species in waters: comparing Chelex-100 and titanium dioxide-based adsorbents

Aluminum is acutely toxic, and elevated concentrations of dissolved Al can have detrimental effects on both terrestrial and aquatic ecosystems. Robust analytical methods that can determine environmentally relevant Al fractions accurately and efficiently are required by the environmental monitoring community. A simple, robust passive sampling method, the diffusive gradients in thin films (DGT) technique, was evaluated for the measurement of dissolved Al species in freshwater and marine water using either Chelex-100 or Metsorb (a titanium dioxide-based binding agent) as the adsorbent. Mass vs time DGT deployments at pH 5.05 (Al(3+) and Al(OH)(2+) dominate) and 8.35 (Al(OH)(4)(-) dominates) demonstrated linear uptake of Al (R(2) = 0.989 and 0.988, respectively) for Metsorb. Similar deployments of Chelex-DGT showed linear uptake at pH 5.05 (R(2) = 0.994); however, at pH 8.35 the mass of Al accumulated was 40-70% lower than predicted, suggesting that Chelex-100 is not suitable for Al measurements at high pH. The Metsorb-DGT measurement was independent of pH (5.0-8.5) and ionic strength (0.001-0.7 mol L(-1) NaNO(3)), whereas the Chelex-DGT measurement was only independent of ionic strength at pH 5.0. At pH 8.4, increasing ionic strength led to considerable underestimation (up to 67%) of Al concentration. Deployments of Metsorb-DGT (up to 4 days) in synthetic freshwater (pH range 5.4-8.1) and synthetic seawater (pH 8.15) resulted in linear mass uptakes, and the concentration measured by DGT agreed well with solution concentrations. Conversely, deployment of Chelex-DGT in synthetic seawater and freshwater (pH ≥7.7 Al(OH)(4)(-) dominant species) resulted in a decrease in accumulated mass with increasing deployment time. In situ field evaluations in fresh, estuarine, and marine waters confirmed that Metsorb-DGT was more accurate than Chelex-DGT for the measurement of dissolved Al in typical environmental waters.     

Stress-Inducible Gene Atf3 Dictates a Dichotomous Macrophage Activity in Chemotherapy-Enhanced Lung Colonization

Previously, we showed that chemotherapy paradoxically exacerbated cancer cell colonization at the secondary site in a manner dependent on Atf3, a stress-inducible gene, in the non-cancer host cells. Here, we present evidence that this phenotype is established at an early stage of colonization within days of cancer cell arrival. Using mouse breast cancer models, we showed that, in the wild-type (WT) lung, cyclophosphamide (CTX) increased the ability of the lung to retain cancer cells in the vascular bed. Although CTX did not change the WT lung to affect cancer cell extravasation or proliferation, it changed the lung macrophage to be pro-cancer, protecting cancer cells from death. This, combined with the initial increase in cell retention, resulted in higher lung colonization in CTX-treated than control-treated mice. In the Atf3 knockout (KO) lung, CTX also increased the ability of lung to retain cancer cells. However, the CTX-treated KO macrophage was highly cytotoxic to cancer cells, resulting in no increase in lung colonization—despite the initial increase in cell retention. In summary, the status of Atf3 dictates the dichotomous activity of macrophage: pro-cancer for CTX-treated WT macrophage but anti-cancer for the KO counterpart. This dichotomy provides a mechanistic explanation for CTX to exacerbate lung colonization in the WT but not Atf3 KO lung.     

Arsenic transformations and biomarkers in meadow voles (Microtus pennsylvanicus) living on an abandoned gold mine site in Montague, Nova Scotia, Canada

Arsenic is one of the most widely encountered environmental contaminants because of a number of anthropogenic sources; in Canada the main anthropogenic release of arsenic is from mine tailings ponds. The present study is part of a series of studies to measure chemical and biological effects of exposure for meadow voles (Microtus pennsylvanicus) living on arsenic contaminated sites. Two additional objectives were addressed in the present study: the effect of higher arsenic concentrations compared with previous studies, and the comparison of chemical speciation and biological effects. To obtain the higher environmental concentrations, specimens were collected from a former gold mining site in Montague, NS that contains highly elevated concentrations of arsenic in soils and plants. Meadow voles were collected and their tissues were analyzed for total arsenic to measure uptake, and arsenic speciation to examine the chemical effects of the high arsenic exposure. In addition to the arsenic analysis, a biomonitoring study was undertaken to examine the sub-cellular effects in meadow voles resulting from the elevated arsenic exposure. Meadow voles living on the contaminated site had substantially higher concentrations of total arsenic than animals from the background (reference) location. The extractable arsenic in internal tissues was present mainly as monomethylarsonic acid (up to 14% of total arsenic). A statistically significant relationship was observed between the reduction of glutathione in vole livers and the increase in liver arsenic concentrations, and micronucleated monochromatic red blood cells were also significantly elevated in voles from the arsenic contaminated site. This is one of the few field studies where sub-cellular effects were observed, and the first to show a co-existence of such effects with relatively high proportions of monomethylarsonic acid in voles living near mine tailings.     

Surface shear stress relaxation of silica glass

A constant angle of twist was applied to silica glass rods in order to produce a torsional shear strain and a reduction in torque representative of the stress state in the glass was measured as a function of time when rods were heat-treated in air at temperatures, 550-700°C, far below the glass transition temperature. The monotonic decrease of torque with time was explained by surface stress relaxation, which can be described by a relaxation of stress at the surface of glass which is promoted by water. The obtained surface stress relaxation diffusion coefficients were consistent with those obtained earlier from silica glass fiber bending under a similar water vapor pressure. The observed relaxation in torsion supports the mechanism of surface stress relaxation over the swelling-based mechanism for applications including glass fiber strengthening.     

An experimental investigation of interfacial instability in separated blood

Experiments are done with separated human blood decelerated at constant rates to determine the maximum deceleration rate while avoiding remixing of the layers, which have different densities and viscosities. The deceleration rate affects both the stability and separation of particles through sedimentation. The velocity at onset of instability for a constant deceleration rate is experimentally determined for a 12-cm-diameter disk. Parameters of cell pack thickness, plasma thickness, and total thickness are investigated experimentally, and the only statistically significant parameter to affect stability is rate of deceleration. The data describe a correlation separating regions of stability and instability. To understand stability in decelerating flow of separated blood plasma and cells, the equations of motion are solved for a two-layer fluid flow with a moving boundary and free surface. Inclusion of non-Newtonian rheology of blood predicts large discontinuities in the shear rate, which is proposed as the cause of the interfacial instabilities. © 2019 American Institute of Chemical Engineers AIChE J, 65: 1376–1386, 2019     

Determination of biodiesel blending percentages using natural abundance radiocarbon analysis: testing the accuracy of retail biodiesel blends

Blends of biodiesel and petrodiesel are being used increasingly worldwide. Due to several factors, inaccurate blending of these two mixtures can occur. To test the accuracy of biodiesel blending, we developed and validated a radiocarbon-based method and then analyzed a variety of retail biodiesel blends. Error propagation analysis demonstrated that this method calculates absolute blend content with +/- 1% accuracy, even when real-world variability in the component biodiesel and petrodiesel sources is taken into account. We independently confirmed this accuracy using known endmembers and prepared mixtures. This is the only published method that directly quantifies the carbon of recent biological origin in biodiesel blends. Consequently, it robustly handles realistic chemical variability in biological source materials and provides unequivocal apportionment of renewable versus nonrenewable carbon in a sample fuel blend. Analysis of retail biodiesel blends acquired in 2006 in the United States revealed that inaccurate blending happens frequently. Only one out of ten retail samples passed the specifications that the United States Department of Defense requires for blends that are 20% biodiesel (v/v; referred to as B20).     

Development of an independent hydrology audit methodology to support flood risk assessment in the planning process in Scotland

The recent flooding in the North–East of Scotland has highlighted issues around climate change due to significant changes in duration, severity and volume of precipitation events. The Planning (PA) and Flood Authorities (FA) often do not have the capacity or resources to review and check the accuracy and robustness of the SUD schemes nor the calculations submitted by developers. This study demonstrates the development and application of an Independent Hydrology Audit (IHA) service aimed at auditing and reviewing ‘in principle’ planning applications from the aspect of flooding risk to the wider community the development is located within. The output of this service is to establish a more accurate representation of surface water impact from developments through the use of adequate green/blue infrastructure, provide a greater assurance to the communities at risk of flooding, and help the PA and FA meet their statutory obligations at the initial stage of planning.     

A new experiments-based methodology to define the stability threshold for any vehicle exposed to flooding

A vehicle exposed to flooding, after losing stability, becomes buoyant and may be washed away with potential injuries and fatalities. Such vehicles cause additional disruption to traffic that is already affected by flooding, which may lead to substantial indirect economic impact, especially in urban areas. Therefore, the analysis of the stability of vehicles exposed to flooding is important in order to make decisions to reduce damages and hazards. In this research, based on an experimental campaign that included a range of twelve car models, a new methodology to obtain the stability threshold for any real vehicle exposed to flooding is developed. A stability coefficient (SC_mod) is derived with which the vehicles can be sorted by stability against water flows and their stability functions may be determined. The experiments were conducted with three different model scales (1:14, 1:18 and 1:24) and involved analysis of both friction and buoyancy effects, which made this the most comprehensive research study to date. This methodology enables the definition of a stable area in the flow depth-velocity domain for any real vehicle. A tool is provided that decision-makers in the field of urban flood risk management can employ and after defining a design vehicle they can obtain its corresponding stability threshold.     

The ghosts of brain states past: Remembering reactivates the brain regions engaged during encoding.

There is growing evidence that the brain regions involved in encoding an episode are partially reactivated when that episode is later remembered. That is, the process of remembering an episode involves literally returning to the brain state that was present during that episode. This article reviews studies of episodic and associative memory that provide support for the assertion that encoding regions are reactivated during subsequent retrieval. In the first section, studies are reviewed in which neutral stimuli were associated with different modalities of sensory stimuli or different valences of emotional stimuli. When the neutral stimuli were later used as retrieval cues, relevant sensory and emotion processing regions were reactivated. In the second section, studies are reviewed in which participants used different strategies for encoding stimuli. When the stimuli were later retrieved, regions associated with the different encoding strategies were reactivated. Together, these studies demonstrate not only that the encoding experience determines which regions are activated during subsequent retrieval but also that the same regions are activated during encoding and retrieval. In the final section, relevant questions are posed and discussed regarding the reactivation of encoding regions during retrieval. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An improvement in the calculation of the magnetic field for an arbitrary geometry coil with rectangular cross section Int. J. Numer. Model. 2005; 18(6):493–504

The above article was published in Volume 18, Issue 6, Pages 493–504, (October 2005). A number of imperfections were subsequently identified and have been corrected below. On page 497, the following equation has been corrected to: On page 501, the following equation has been corrected to: On page 502, the following equation has been corrected to: