QoS support for an all IP system beyond 3G

Mobile radio systems beyond the third generation will evolve into all-IP systems, integrating Internet and mobile system advantages. The BRAIN project is developing a system architecture which combines local coverage broadband radio access systems based on HIPERLAN/2 with several wider-coverage mobile radio systems, enabling full coverage of seamless IP-based services for users in hot spot areas and on the move. End-to-end QoS provision is one of the major challenges in the design of such a system and must be supported by the application, network, and wireless access layers. This article proposes a QoS system architecture, including the terminal architecture, the IP-based access network, and the main characteristics of the enhancements to the air interface based on HIPERLAN/2 focusing on its wireless QoS support     

Rigorous and approximate analysis of metallic gratings in soft X-ray and EUV regions

Abstract

In deep ultraviolet and soft X-ray regions the complex refractive indices of metals differ substantially from their values in the visible region of the spectrum. The implications of this fact are analysed for metallic gratings illuminated by electromagnetic fields with wavelengths ranging from soft X‐rays to near infrared, concentrating on short wavelengths. In particular, we study metal-stripe gratings (linear polarizers for visible light) by rigorous diffraction theory to determine the short-wavelength region in which a combination of the geometrical thin-element approximation and the theory of single-layer films can be applied. Then we study inductive grid filters for protection of X-ray detectors from infrared radiation in space applications.     

Gone with the wind? Newspaper discourse of eutrophication and blue‐green algae blooms in Finland

The mass media shape the public and policy agenda by giving prominence to certain ecosystem changes and risks, as well as by framing some policy measures as the preferred ones. Based on longitudinal analysis of the leading Finnish newspaper, this study considers the media coverage of eutrophication. The results show an increase of reporting in the late 1990s as a result of intertwined ecological and social factors – i.e. intense algal occurrences and establishment of a national communication system. The news coverage has highlighted the harmful algal blooms and health risks of algal toxins and has framed short‐term weather conditions as the key factor regulating algal occurrences. This creates a challenge for environmental management aimed at reduction in the nutrient discharges that influence the state of the environment in the long term.     

Abrasive wear of steel against gravel with different rock–steel combinations

Wear testing equipment and tests used in research laboratories are often miniature or simplified versions of real applications. For example standardized ASTM dry sand rubber wheel abrasion test G 65 and pin abrasion test G 132 are widely used to study materials’ abrasion wear resistance. The test results, however, do not always correlate too well with the results obtained from real wear conditions. One reason for this is, for example, that in the crushing applications of mining industry the abrasive size is usually much larger than that used in the laboratory wear tests. To study the abrasive wear caused by larger size gravel, new three-body abrasion test equipment was therefore constructed. The equipment uses the pin-on-disk principle with free abrasive particles of sizes up to 10 mm. During the test the pin is repeatedly pressed against a fixed amount of abrasive that is rotating with the disk having confining walls. As the pin is prevented from touching the counterbody, only the abrasive acts as the wearing agent.Three steels of different hardnesses were cross-tested as pin–disk pairs and as pins against a rubber disk using three igneous rock gravels with different crushability properties as abrasives. The wear was measured as mass loss from both the pin and the disk, and the rock comminution was measured by sieving. The results indicate that the mechanism of wear is greatly affected by the hardness of the counterbody. When using large size abrasives, the rate of comminution is also a very important factor that can significantly affect the wear test results.     

Fish bile used to detect estrogenic substances in treated sewage water

Endocrine disrupting effects on fish associated with sewage treatment effluents have been demonstrated in several studies. To investigate if the effluents from two modern Swedish sewage treatment plants contained estrogenic substances, juvenile rainbow trout were exposed to sewage water before and after the last treatment step which is a sand filter. As a biomarker for estrogenic effect, vitellogenin was analysed in the blood plasma of the exposed fish. To identify substances possibly responsible for the effect, bile fluid from the exposed fish were analysed with GC/MS. Elevated levels of vitellogenin were only seen in the fish exposed at one of the sewage treatment plants, the one with shorter residence time in the biological treatment steps, which suggests that the residence time is of importance for the ability to reduce the amount of estrogenic substances in the sewage water. The highest elevation of vitellogenin was seen in the fish exposed to water before the sand filter, which indicates that the sand filter contributes to further reduction of estrogenic substances in the sewage water. In bile from the same group of fish, considerably higher concentrations of estrone, bisphenol A and 4-nonylphenol (4.0 microg/g bile, 23 microg/g bile and 24 microg/g bile, respectively) were observed compared to bile from control fish (<0.04 microg/g bile, 0.21 microg/g bile, and 3.5 microg/g bile, respectively). The more potent steroidal estrogens were suggested to be major contributors to the observed estrogenic effect, although xenoestrogens were detected at higher concentrations in the bile fluid.     

Impact of Firefighting Sprays on the Fire Performance of Structural Steel Members

Fire Technology - The feasibility of coupled computational fluid dynamics (CFD) and finite element (FE) simulations to aid the planning of fire intervention tactics and the effectiveness of...     

塑料异型材挤塑模内筋设计

塑料异型材内筋的数量和结构形式繁多。通过分析几种基本样式内筋的成型特点和影响因素,阐述了基本样式内筋模具设计的方法和技巧,并讨论了将结构复杂的内筋转化为结构简单的基本样式内筋进行设计的思路和方法。