Forward and Backward Four-wave Mixing of Non-classical Light with Pump Depletion

Abstract

Photon statistics and non-classical behaviour of forward and backward four-wave mixing are examined including the coupling of modes in the approximation of small fluctuations around a stationary point, which is analytically determined and conditions for its stability are obtained. The depletion of pump modes is involved and effects of nonlinear dynamics, non-classical behaviour of input radiation, external noise and losses are included.     

Numerical simulation of separated flows in channels

The work deals with numerical modelling of turbulent flows in channels with an expansion of the cross-section where flow separation and reattachment occur. The performance of several eddy viscosity models and an explicit algebraic Reynolds stress model (EARSM) is studied. The used test cases are flows in channels with various backward facing steps where the step is perpendicular or inclined and the top wall is parallel or deflected. Furthermore, a channel with the circular ramp is considered. The numerical solution is achieved by the finite volume method or by the finite element method. The results of both numerical approaches are compared.     

Decolorization of organic dyes by Irpex lacteus in a laboratory trickle‐bed biofilter using various mycelium supports

BACKGROUND: Dyes used in textile industries and released to their wastewaters are serious ecological problems as they are hard to degrade by common means used in wastewater treatment plants. White‐rot fungi can biodegrade textile dyestuffs using their extracellular enzyme system. However, it is difficult to keep them in functional form in conventional wastewater treatment systems, because of their specific nutritional and physiological requirements. Selection of a suitable bioreactor type and mode of operation are crucial for successful implementation of white rot fungi in waste water treatment processes. RESULTS: Both Remazol Brilliant Blue R (RBBR) and Reactive Orange 16 (RO16) were decolorized efficiently in the trickle‐bed reactor. A degree of decolorization exceeding 80% was achieved within 2 days with all mycelium carriers and both dyes. In reactors packed with plastic kitchen scourers and luffa sponge slices the decolorization degree reached 90% within 2 days. The initial rate of decolorization of RBBR dye was notably higher than the rate of RO16 decolorization. The lowest liquid hold‐up value (1–1.5%) was achieved in the reactor packed with the plastic kitchen scourers, the largest hold‐up value (3–5%) was observed in the reactor filled with luffa sponge. The longest mean retention time, 430 s, was achieved in the reactor with the luffa carrier at a liquid flow rate of 6.81 cm³ min^?1; the shortest mean retention times (10–20 s) were achieved in the reactor filled with the plastic kitchen scourers. Broad liquid residence time distributions were observed in tracer experiments at all volumetric flow rates. CONCLUSIONS: The ability of I. lacteus to secrete laccase and manganese peroxidase enzymes in a trickle‐bed bioreactor with three mycelium carriers was proved and quantified experimentally. The decolorization capability of the I. lacteus mycelium was only marginally influenced by the kind of carrier used. Basic operational characteristics of the reactor—residence times, axial dispersion and liquid hold‐up—were determined at various liquid flow rates. Copyright © 2009 Society of Chemical Industry     

Stimulated Raman Scattering of Squeezed Light with Pump Depletion

Abstract

Using the approximation of small fluctuations around a stationary point, photon statistics and squeezing of vacuum fluctuations are derived in stimulated Raman scattering including the coupling of photon-photon and photon-phonon modes. The depletion of pump light is described and it is shown that a regime of inversion of the process is related to an increase in quantum fluctuations, which are finally reduced again, more in the anti-Stokes mode than in the Stokes mode. If the anti-Stokes coupling is stronger than the Stokes coupling, then an oscillating behaviour of the statistical characteristics occurs and substantial squeezing can be found in photon-phonon modes.     

Doped polypyrrole for MAPLE deposition: Synthesis and characterization

The contribution deals with synthesis and characterization of conductive polypyrrole (PPY), which should be suitable for depositions of thin layers by Matrix Assisted Pulsed Laser Evaporation (MAPLE) method. The samples of doped PPY containing various organic dopants – (i) p-toluenesulfonic acid, (ii) dodecyl-benzenesulfonic acid, (iii) dioctyl-sulfosuccinic acid and (iv) camphorsulfonic acid – were synthesized by polymerization of pyrrole in acidic or neutral solution. Solubility of synthesized PPY and settlement time of PPY particles in water and dimethylsulfoxide – parameters critical for MAPLE method – were investigated. The composition of prepared PPY was verified by FTIR spectroscopy. Conductivity of the polymer in solid state was determined to be in range from σ = 2.6 × 10^?6 S cm^?1 to σ = 6.0 × 10^?2 S cm^?1. The optimal material for MAPLE deposition is PPY containing organic dopants (ii)–(iv), dissolved in DMSO matrix (solubility from 4.1% to 6.5% by weight and settlement time 140–240 h).     

Combined design and load shifting for distributed energy system

Renewable distributed energy generation (DEG) system plays an important role in future power developments and is one of the options to reduce energy consumption. It is envisaged that energy efficiency of DEG systems can be improved via load shifting (LS). This study proposed a heuristic-based numerical approach to perform LS analysis on renewable stand-alone DEG systems. The technique is an extension from a method known as the Electric System Cascade Analysis (ESCA). The new technique, which focuses on efficient electricity utilisation is able to determine the optimal: (i) load profiles, (ii) capacity of power generator, (iii) capacity and power of energy storage (ES) and (iv) charging/discharging schedule of ES. The stage-wise technique allows user to compare and determine the optimal design in a flexible way while having a better understanding of the selection of options. The application of ESCA-LS on a case study revealed that after incorporation of direct LS (load manipulation) in addition to LS by ES (supply manipulation), the power generators and ES capacity can be further reduced. While reduction of 3.1 % for solar-PV installation area and 3.9 % for biomass power generator is recorded, ES power-related capacity and energy-related capacity managed a higher reduction of up to 19.0 and 13.2 % for the main case study     

Swelling and photoelastic behaviour of ionized hydrogels of poly(acrylic acid)

Summary The photoelastic and swelling behaviour of poly(acrylic acid) gels swollen in 1 M NaCl aqueous solution was studied as a function of crosslinking degree (1–5 wt.% ethylene glycol dimethacrylate) and degree of ionization _g = 0 – 1. The degree of swelling passes through a minimum at _g – 0.15 regardless of the degree of crosslinking, probably due to the formation of hydrogen bonds between ionized and nonionized carboxyl groups. In the same neutralization region, the equilibrium modulus reaches a maximum; on the other hand, the modulus related to the dry state is independent of for all crosslinker concentrations. Thus the mechanical behaviour of poly(acrylic acid) gels is in accord with the Gaussian theory and no contribution of permanent physical interactions to the modulus is observed. The optical behaviour is more complex — the sign of the stress-optical coefficient C _e changes three times with increasing due to the orientation of the side groups. The analysis of the optical data shows that the C _e value is controlled by the degree of swelling and by the ionization.