Optimization of Root Section for Ultra-long Steam Turbine Rotor Blade

This study presents the comparison of aerodynamic performances of two successive designs of the root profiles for the ultra-long rotor blade equipped with a straight fir-tree dovetail. Since aerodynamic and strength requirements laid upon the root section design are contradictory, it is necessary to aerodynamically optimize the design within the limits given by the foremost strength requirements. The most limiting criterion of the static strength is the size of the blade cross-section, which is determined by the number of blades in a rotor and also by the shape and size of a blade dovetail. The aerodynamic design requires mainly the zero incidence angle at the inlet of a profile and in the ideal case ensures that the load does not exceed a limit load condition. Moreover, the typical root profile cascades are transonic with supersonic exit Mach number, therefore, the shape of a suction side and a trailing edge has to respect transonic expansion of a working gas. In this paper, the two variants of root section profile cascades are compared and the aerodynamic qualities of both variants are verified using CFD simulation and two mutually independent experimental methods of measurements (optical and pneumatic).     

Topology optimization in Bernoulli free boundary problems

In this work we consider the topology optimization of systems governed by the external Bernoulli free boundary problem arising, for example, from the mathematical modelling of electro-chemical machining. In this work we combine, for the first time, the so-called pseudo-solid approach to the solution of governing free boundary problems and the level set method, which is used to define the design domain. Previous studies of the problem showed a tendency towards topological changes in the design, which can now automatically take place thanks to level set parametrization. The scalar function used in the level set method is parametrized using radial basis functions, converting the problem into a parametric optimization problem, which is solved using a gradient-based method.     

Spatial and temporal variation of turbulence characteristics in combined sewer flow

Flow unsteadiness is a typical feature of both combined and storm sewer flow. The following study therefore deals with both theoretical and experimental investigations of the steady uniform and transient turbulent open-channel flows in a circular conduit with smooth walls as well as over rough sediment deposits. The aim of the study is to define the relationship between flow unsteadiness and selected flow/turbulence characteristics estimated in a circular tube running partially full using the ultrasonic velocity profiler (UVP) method. The temporal/spatial turbulence intensities and the Reynolds stress distribution were identified in the mid-vertical of the pipe. Generally, the absolute values of turbulent characteristics are larger in the rising branch of the hydrograph than in the descending one for the same flow depths. This difference in absolute values is related to the flow equilibrium parameter. Furthermore, the influence of the sediment bed on selected flow/turbulence variables was studied. The results show a strong impact of cross-section geometry on local values of friction velocity, i.e. bottom shear stress, along the wetted perimeter of the channel cross-section. Interestingly, their relative values decreased along with an increase in flow depth.     

Desorption and ionization mechanisms in desorption atmospheric pressure photoionization

The factors influencing desorption and ionization in newly developed desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS) were studied. Redirecting the DAPPI spray was observed to further improve the versatility of the technique: for dilute samples, parallel spray with increased analyte signal was found to be the best suited, while for more concentrated samples, the orthogonal spray with less risk for contamination is recommended. The suitability of various spray solvents and sampling surface materials was tested for a variety of analytes with different polarities and molecular weights. As in atmospheric pressure photoionization, the analytes formed [M + H](+), [M - H](-), M(+*), M(-*), [M - H + O](-), or [M - 2H + 2O](-) ions depending on the analyte, spray solvent, and ionization mode. In positive ion mode, anisole and toluene as spray solvents promoted the formation of M(+*) ions and were therefore best suited for the analysis of nonpolar compounds (anthracene, benzo[a]pyrene, and tetracyclone). Acetone and hexane were optimal spray solvents for polar compounds (MDMA, testosterone, and verapamil) since they produced intensive [M + H](+) ion peaks of the analytes. In negative ion mode, the type of spray solvent affected the signal intensity, but not the ion composition. M(-*) ions were formed from 1,4-dinitrobenzene, and [M - H + O](-) and [M - 2H + 2O](-) ions from 1,4-naphthoquinone, whereas acidic compounds (naphthoic acid and paracetamol) formed [M - H](-) ions. The tested sampling surfaces included various materials with different thermal conductivities. The materials with low thermal conductivity, i.e., polymers like poly(methyl methacrylate) and poly(tetrafluoroethylene) (Teflon) were found to be the best, since they enable localized heating of the sampling surface, which was found to be essential for efficient analyte desorption. Nevertheless, the sampling surface material did not affect the ionization mechanisms.     

The effect of prebiotics on adherence of probiotics

Prebiotics are generally considered to promote the function or viability of probiotics via their fermentation, but their effect on the adherence of probiotics is still unclear. In this study, we examined the effect of 4 commercially available prebiotics [Orafti GR, Orafti P95, and Orafti Synergy (Beneo GmbH, Mannheim, Germany), and Vivinal (Friesland Foods Domo, Amersfoort, the Netherlands)] and 3 simple saccharides (glucose, galactose, and lactose) on the adherence of 5 probiotic type strains, 2 lactococci starter cultures, and 5 potential dairy probiotic strains from the Culture Collection of Dairy Microorganisms (Tábor, Czech Republic). Adherence was tested in microtiter plates on the following types of substrate: polystyrene alone and polystyrene coated with either porcine mucus or cocultures of the human colon cell lines Caco2 and HT29-MXT (1:9 ratio of HT29-MXT:Caco2). Adherence was evaluated as a change in fluorescence in the well of a microtiter plate. The most commonly observed effect (with a few exceptions) of prebiotics was decreased adherence of the tested strains observed on all types of substrate. The tested saccharides, which are part of the residual compounds of the used prebiotics, had a very similar effect—eliciting a decrease in adherence ability in the majority of the probiotic strains.     

Epoxy/poly(ɛ‐caprolactone) nanocomposites: Effect of transformations of structure on crystallization

The influence of morphology of the epoxy/poly(?‐caprolactone) (PCL) system and corresponding nanocomposites with organophilized layered silicate on PCL crystallization was studied by differential scanning calorimetry, scanning, and transmission electron microscopy. The results obtained indicate a significant affecting of nonisothermal PCL crystallization by phase morphology brought about by the reaction‐induced phase separation (RIPS) influenced either by various nanoclay contents or the epoxy/PCL ratio. Dispersed morphology of PCL matrix with epoxy globules induces crystallization at higher temperatures. The inverse dispersed morphology of epoxy matrix with PCL inclusions causes crystallization at lower temperature. The co‐continuous morphology induces crystallization in both steps. Rate of the second crystallization step is substantially higher than that in the first step. No nucleation effect has been found in the nanocomposites with the added nanofiller. Multicomponent samples show retarded crystallization, i.e., lower crystallinities and lower overall crystallization rate compared with neat PCL. The results obtained suggest that it is primarily morphological/interfacial effects that play a decisive role in the crystallization behavior of PCL in the epoxy/PCL/clay system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3197–3204, 2013     

ALIPHATIC C-H BOND RESPONSES IN THE 900-700 cm−1 REGION OF THE FTIR SPECTRA OF COAL TARS

ABSTRACT

Four bituminous coals were comprehensively separated by column chromatography into a number of fractions. Four aromatic hydrocarbon fractions of each tar were analyzed by FTIR spectroscopy, and the 900-700 cm^?1 spectral region was evaluated. This spectral region was found to be composed of at least 14 separate bands, which were resolved by using self-deconvolution and curve-fitting procedures. The bands near 821 cm^?1, 791 cm^?1, and 784 cm^?1 were proposed to originate from rocking vibrations of aliphatic C-H bonds. For the tar samples with a proton aromaticity between 0.21 and 0.37, these bands account for on average 12% of the total integral intensity of the 900-700 cm^?1 region. This percentage cannot likely be neglected in a correct quantitative evaluation of the region and calculation of the aromatic hydrogen concentration. However, a correct resolution of the bands can be very difficult in the FTIR spectra of a complex material, such as coal.     

Distribution of isoflavones and coumestrol in neglected tropical and subtropical legumes

BACKGROUND: Isoflavones and coumestrol from dietary legumes are plant constituents showing multiple beneficial effects on humans. Owing to their ability to bind with mammalian estrogenic receptors and thereby intervention in several kinds of hormone‐related cancers, they have received much attention. Soybean (Glycine max) is currently the major source of isoflavonoids in human diet. However, dozens of tropical and subtropical leguminous species remain unexplored for their isoflavonoids content. RESULTS: We have analyzed 55 extracts from 41 tropical and subtropical legume species used either in human or animal diet by high‐performance liquid chromatography for the content of soy isoflavones, biochanin A, daidzein, daidzin, formononetin, genistein, genistin, sissotrin, ononin and the coumestan coumestrol. Genistein and biochanin A were the most abundant compounds. The highest content of genistein was found in aerial parts of Andira macrothyrsa, seeds of Pachyrhizus tuberosus and aerial parts of Calopogonium mucunoides (598, 250 and 184 µg g^?1, respectively) and biochanin A in aerial parts of Cratylia argentea, C. mucunoides and flowers of A. macrothyrsa (76, 53 and 40 µg g^?1, respectively). CONCLUSION: None of the samples tested was richer overall source of soy isoflavones and coumestrol than soybean; nevertheless several species (C. mucunoides or A. macrothyrsa) may serve as a promising source of individual compounds. © 2012 Society of Chemical Industry     

New voltage-mode universal filter and sinusoidal oscillator using only single DBTA

In this article, a new voltage-mode second-order universal frequency filter and sinusoidal oscillator using only single differential-input buffered and transconductance amplifier (DBTA) is presented. The proposed voltage-mode filter structure using single DBTA and four passive elements can provide all standard filter functions, i.e. low-, band-, high-pass, band-stop, and all-pass without changing the circuit topology and enables independent control of the quality factor Q using single passive element. The circuit requires the minimal number of active and passive elements with no conditions for component matching. By slight modification of the proposed filter structure, the new DBTA-based sinusoidal oscillator is easily obtained. The oscillation condition and the oscillation frequency are independently adjustable by different virtually grounded passive elements. The proposed sinusoidal oscillator employs only grounded capacitors. The passive and active sensitivities of all the proposed circuit configurations are low. PSPICE simulations using a BJT realisation of DBTA and experimental results based on commercially available amplifiers OPA860 and MAX436 are included, which prove the workability of the proposed circuits.     

An electronically tunable current-mode quadrature oscillator using PCAs

This article presents a new realisation of active RC sinusoidal oscillator with electronically tunable condition and frequency of oscillation (FO). As compared to the class of three resistors, two capacitors (3R-2C)-based canonic oscillators, the circuit proposed here uses only two resistors and two capacitors as the passive components and still provides non-interactive tuning laws for the condition of oscillation and the FO. The proposed circuit employs new bipolar programmable current amplifier as the active building block and is capable of simultaneously providing two explicit quadrature current outputs. SPICE simulation results have been included to verify the workability of the circuit as an oscillator and the tuning range of the FO.