Poly(methyl methacrylate) and polyacrylonitrile dispersions stabilized by gelatin

Methyl methacrylate was polymerized in an aqueous medium in the presence of gelatin using potassium persulfate as initiator. The dispersion mode of polymerization, when the monomer is completely miscible with water, was investigated and compared with an emulsion process, which proceeds at higher monomer concentration. Spherical and relatively uniform polymer particles were formed. Macroscopic precipitation of polymer is prevented by combination of the steric stabilization by grafted gelatin and of repulsive electrostatic interactions from the initiator residues attached to the particle surface. Static and dynamic light scattering have been used to determine the molar mass (molar mass of the whole dispersion particle, M_wD ～ 10⁸-10⁹ g mol^?1) and hydrodynamic radius (R_hD ～ 50-120 nm) of the particles. The number of particles per unit volume does not depend on overall monomer concentration, and it is higher, and therefore the particle size is smaller, than that observed for the soapless emulsion polymerization. The addition of gelatin may be thus used to modify the particle size. Acrylonitrile dispersions were prepared under similar conditions. Unlike methyl methacrylate, this monomer does not swell the polymer particles. While poly(methyl methacrylate) particles are spherical and relatively uniform, the polyacrylonitrile dispersions consist of polydisperse aggregates of tiny polymer particles.     

Influence of oxygen partial pressure and substrate temperature during vapour deposition on the structural properties of CdSe films

CdSe films prepared in vacuum by sublimation from the compound at oxygen partial pressures in the residual atmosphere from 2.8 × 10^?5 to 3.2 × 10^?4 Torr and at substrate temperatures of 295 and 523 K were subjected to X-ray structural analysis. The results obtained are analysed and discussed in terms of some structures different from those of CdSe, e.g. CdSeO₃ and CdSeO₃.SeO₂.     

Aldehyde functionalization of styrene polymers

Summary Two methods of the introduction of aldehyde group into polystyrene skeleton are described.     

Toxicity increases in ice containing monochlorophenols upon photolysis: environmental consequences

The toxic effects of photoproducts formed upon the photolysis of 2- and 4-chlorophenol (CP) frozen solutions in polycrystalline ice phase were determined with a bacterial luminescence test (Vibrio fisheri), and in vitro biomarker assay for dioxin-like effects (inductions of AhR-dependent luciferase in H4IIE-luc cells) and compared to the toxic effects of products of the same photoreaction in aquatic phase. Coupling photoproducts formed in ice samples (3'-chlorobiphenyl-2,4'-diol and 3-chlorobiphenyl-2,2'-diol from 2-CP photolysis and 5-chlorobiphenyl-2,4'-diol from 4-CP photolysis) were found to be more toxic to V. fisheri than parent CPs and elicited significant inductions of dioxin-like effects (the effective concentrations EC50 approximately 3 x 10(-5) mol L(-1) corresponded to known weaker ligands of AhR, such as nonplanar polychlorinated biphenyls or polycyclic aromatic hydrocarbons). To complete the picture, a photoproduct formed from 4-CP (5-chlorobiphenyl-2,4'-diol) was synthesized, and a detailed toxicity assessment with purified compound confirmed the results obtained with irradiated samples. Our findings support a recently proposed model according to which solar radiation can trigger the formation of new types of organic pollutants in polar ice or tropospheric ice cloud particles, presenting possibly greater risk to the environment than the parent compounds.     

Czech results at criticality dosimetry intercomparison 2002

Two criticality dosimetry systems were tested by Czech participants during the intercomparison held in Valduc, France, June 2002. The first consisted of the thermoluminescent detectors (TLDs) (Al-P glasses) and Si-diodes as passive neutron dosemeters. Second, it was studied to what extent the individual dosemeters used in the Czech routine personal dosimetry service can give a reliable estimation of criticality accident exposure. It was found that the first system furnishes quite reliable estimation of accidental doses. For routine individual dosimetry system, no important problems were encountered in the case of photon dosemeters (TLDs, film badge). For etched track detectors in contact with the 232Th or 235U-Al alloy, the track density saturation for the spark counting method limits the upper dose at approximately 1 Gy for neutrons with the energy >1 MeV.     

Static load balancing applied to Schur complement method

A finite element method often leads to large sparse symmetric and positive definite systems of linear equations. We consider parallel solvers based on the Schur complement method on homogeneous parallel machines with distributed memory. A finite element mesh is partitioned by graph partitioning. Such partitioning results in submeshes with similar numbers of elements and, consequently, submatrices of similar sizes. The submatrices are partially factorised. The time spent on the partial factorisation can be different, i.e., disbalanced, because methods exploiting the sparsity of submatrices are used. This paper proposes a Quality Balancing heuristic that modifies classic mesh partitioning so that the partial factorisation times are balanced, which saves overall computation time, especially for time dependent mechanical and nonstationary transport problems.     

Regeneration of platinum-metal-based catalysts with carboxyphosphines as extractants

Separation of platinum-metal-based homogeneous catalysts was achieved by their conversion to complexes of functionalized phosphines of the general formulae R_3-n P[(CH₂) _x CO₂H)] _n , R = Me, Et, Ph,n = 1, 2, 3,x = 1, 2, and [(HO₂CCH₂)PCH₂]₂, followed by extraction of the complexes into aqueous phase. This approach to regeneration of platinum metals from reaction mixtures after carrying out homogeneously catalyzed reactions was demonstrated on 11 examples of various types of reactions with Ru, Rh, Pd, Os, Ir and Pt compounds as catalysts.     

Epoxy/poly(ɛ‐caprolactone) nanocomposites: Effect of transformations of structure on crystallization

The influence of morphology of the epoxy/poly(?‐caprolactone) (PCL) system and corresponding nanocomposites with organophilized layered silicate on PCL crystallization was studied by differential scanning calorimetry, scanning, and transmission electron microscopy. The results obtained indicate a significant affecting of nonisothermal PCL crystallization by phase morphology brought about by the reaction‐induced phase separation (RIPS) influenced either by various nanoclay contents or the epoxy/PCL ratio. Dispersed morphology of PCL matrix with epoxy globules induces crystallization at higher temperatures. The inverse dispersed morphology of epoxy matrix with PCL inclusions causes crystallization at lower temperature. The co‐continuous morphology induces crystallization in both steps. Rate of the second crystallization step is substantially higher than that in the first step. No nucleation effect has been found in the nanocomposites with the added nanofiller. Multicomponent samples show retarded crystallization, i.e., lower crystallinities and lower overall crystallization rate compared with neat PCL. The results obtained suggest that it is primarily morphological/interfacial effects that play a decisive role in the crystallization behavior of PCL in the epoxy/PCL/clay system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3197–3204, 2013     

Optimal Sensor Networks for Area Monitoring Using Rotating and Beam Sensors

We consider the problem of monitoring the Euclidean plane using rotating sensors with detection sectors and beam sensors. We assume that intruders can appear anywhere at any time and move arbitrarily fast, and may have full knowledge of the sensor network. We require that such intruders be detected within a finite amount of time. We give an optimal network for this problem consisting of a combination of rotating sensors of angle 0 and beam sensors that uses the minimum number of both types of sensors. We show a trade-off between the density of beam sensors needed and the angle of the detection sector of the rotating sensors. Secondly, we give a family of sensor networks using only rotating sensors for the same problem, that demonstrate a trade-off between the detection time and the density of rotating sensors used. We show that the density of rotating sensors required in this case can be significantly reduced by increasing the angle of detection sectors. Finally, we show that our results on the infinite plane can be used to derive sensor networks that monitor some finite regions using a density of sensors that is asymptotically the same, or close to that of the infinite plane case.     

Double O,C,O-chelated diorganotin(IV) cation

The synthesis of double O,C,O-chelated diorganotin(IV) compound L₂SnBr₂ (1), where L is 2,6-(MeOCH₂)₂C₆H₃^?, the precursor for the synthesis of Sn ← O intramolecularly coordinated organotin(IV) cations is reported. Treatment of compound 1 with SnBr₄ yielded the double O,C,O-chelated diorganotin(IV) ionic pair [L₂SnBr]⁺ [SnBr₅·THF]^? (2). Both compounds 1 and 2 were characterized by ¹H, ¹³C, ¹¹⁹Sn NMR and molecular structure of compound 2 was established by X-ray diffraction.