Polyaniline–silver composites prepared by the oxidation of aniline with silver nitrate in solutions of sulfonic acids

Aniline was oxidized with silver nitrate in aqueous solutions of sulfonic acids: camphorsulfonic, methanesulfonic, sulfamic, or toluenesulfonic acids. Polyaniline–silver composites were produced slowly in 4 weeks in good yield, except for the reaction, which took place in sulfamic acid solution, where the yield was low. Polyaniline in the emeraldine form was identified with UV–visible, FTIR, and Raman spectra. Thermogravimetric analysis was used to determine the silver content, which was close to the theoretical prediction of 68.9 wt.%. Transmission electron microscopy demonstrated the presence of silver nanoparticles of ca 50 nm average sizes as the dominating species, and hairy polyaniline nanorods having diameter 150–250 nm accompanied them. The highest conductivity of 880 S cm⁻¹ was found with the composite prepared in methanesulfonic acid solution. Its conductivity decreased with temperature increasing in the 70–315 K range, which is typical of metals such as silver. The conductivity of composites prepared in solutions of other acids was lower and increased with increasing temperature. Such dependence is typical of semiconductors, reflecting the dominating role of polyaniline in the conductivity behaviour. It is proposed that interfaces between the polyaniline matrix and dispersed silver nanoparticles play a dominating role in macroscopic level of conductivity.     

Synthesis and characterization of magnetic nanocomposites of fullerene‐containing polyurethane films for microwave applications

Novel nanocomposites of barium hexaferrite‐ and fullerene‐containing polyurethane were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffractometry, and energy‐dispersive X‐ray diffraction. The nanoparticles showed good dispersion in the polyurethane matrix. Their thermal, mechanical, and electromagnetic absorbance properties were studied. The complex permeability and permittivity were measured in the frequency range of 8.2–12.4 GHz. The maximum reflection loss of the nanocomposites was found to increase with increasing the ferrite content from 1% to 5%, with maximum value of −7.5 dB at only 5% composition. The incorporation of nanofiller not only imparts mechanical strength to the nanocomposite but also shows good radar‐absorbing properties at only 5% filler concentration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Hydrothermally Stable WO3/ZrO2–Ce0.6Zr0.4O2 Catalyst for the Selective Catalytic Reduction of NO with NH3

A new catalyst WO₃/ZrO₂–Ce_0.6Zr_0.4O₂ (15 wt % WO₃/ZrO₂:Ce_0.6Zr_0.4O₂ = 50:50) has been developed for the selective catalytic reduction of NO with NH₃. The redox component Ce_0.6Zr_0.4O₂ was dispersed on the surface of acidic WO₃/ZrO₂ by the solution combustion method showing the best NO _x reduction efficiency among the catalysts prepared by various modes of mixing of the components. The catalyst has been characterized by XRD, Raman spectroscopy and NH₃-TPD. A NO _x reduction efficiency of more than 90 % was obtained between 300 and 500 °C at α = NH_3,in/NO _x,in = 1. The catalyst showed stable NO _x reduction efficiency after hydrothermal ageing at 700 °C. Sulfur poisoning promoted the NO _x reduction efficiency at high temperatures at the expense of a reduced activity at lower temperatures, but the catalyst could be fully regenerated by heating in O₂ at 650 °C.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Biodiesel from rapeseed oil,methanol and KOH. 3. Analysis of composition of actual reaction mixture

Detailed analysis is described of the samples taken after suitable reaction times from the actual reaction mixture during the production of biodiesel fuel using methanolysis of rapeseed oil catalyzed by KOH. Three methods for stoppage of reaction (neutralisation of catalyst, dilution by two suitable solvents) in the sample are used. The contents of mono‐, di‐ and triacylglycerols, methylesters of fatty acids (biodiesel) and potassium salts of fatty acids of rapeseed oil, glycerol (by HPLC method), basicity (by potentiometric titration) and water (by GC and Karl‐Fischer method) in the samples are determined. An example of these determinations is described.     

A Critical Role for the Presence of Lignocellulosic Material in the Determination of Wood Buffering Capacity

The currently used determinations of wood buffering capacity, which are based on pH-metric titrations of aqueous wood extracts, neglect the effect of lignocellulosic material and the role of its insoluble constituents. This study examined the influence of the presence of wood in a system subjected to titration. A comparison of the results obtained from pine chip extracts and chip suspensions showed that the presence of wood and the wood-to-water ratio were critical factors that affected the measurement of the wood buffering capacity. The evidence showed that the resulting determination may vary by up to six times (0.28–1.99 ml/g), depending upon the conditions of the titration. In addition, it was found that the presence of wood had a neutralizing effect over the course of prolonged pH observations.     

Organometallic DNA–B12 Conjugates as Potential Oligonucleotide Vectors: Synthesis and Structural and Binding Studies with Human Cobalamin-Transport Proteins

The synthesis and structural characterization of Co-(dN)₂₅-Cbl (Cbl: cobalamin; dN: deoxynucleotide) and Co-(dN)₃₉-Cbl, which are organometallic DNA–B₁₂ conjugates with single DNA strands consisting of 25 and 39 deoxynucleotides, respectively, and binding studies of these two DNA–Cbl conjugates to three homologous human Cbl transporting proteins, transcobalamin (TC), intrinsic factor (IF), and haptocorrin (HC), are reported. This investigation tests the suitability of such DNA–Cbls for the task of eventual in vivo oligonucleotide delivery. The binding of DNA–Cbl to TC, IF, and HC was investigated in competition with either a fluorescent Cbl derivative and Co-(dN)₂₅-Cbl, or radiolabeled vitamin B₁₂ (⁵⁷Co-CNCbl) and Co-(dN)₂₅-Cbl or Co-(dN)₃₉-Cbl. Binding of the new DNA–Cbl conjugates was fast and tight with TC, but poorer with HC and IF, which extends a similar original finding with the simpler DNA–Cbl, Co-(dN)₁₈-Cbl. The contrasting affinities of TC versus IF and HC for the DNA–Cbl conjugates are rationalized herein by a stepwise mechanism of Cbl binding. Critical contributions to overall affinity result from gradual conformational adaptations of the Cbl-binding proteins to the DNA–Cbl, which is first bound to the respective β domains. This transition is fast with TC, but slow with IF and HC, with which weaker binding results. The invariably tight interaction of the DNA–Cbl conjugates with TC makes the Cbl moiety a potential natural vector for the specific delivery of oligonucleotide loads from the blood into cells.     

Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites

Multiwalled carbon nanotube (MWCNT)/alumina (Al₂O₃) nanocomposites containing CNT from 0.15 vol.% to 2.4 vol.% have been successfully fabricated by simple wet mixing of as-received commercial precursors followed by pressureless sintering. Extent of densification of nanocomposites sintered at low temperature (e.g. 1500 °C) was <90%, but increased up to ∼99% when sintered at 1700 °C and offered superior performance compared to pure Al₂O₃. Nanocomposites containing 0.3 vol.% MWCNT and sintered at 1700 °C for 2 h in Argon led to ∼23% and ∼34% improvement in hardness and fracture toughness, respectively, than monolithic Al₂O₃. In addition, the highest improvement (∼20%) in bending strength was obtained for 0.15 vol.% MWCNT/Al₂O₃ nanocomposite compared to pure Al₂O₃. Weibull analysis indicated reliability of nanocomposites increased up to 0.3 vol.% MWCNT, whereas, beyond that loading consistency was the same as obtained for pure Al₂O₃. Detailed microstructure and fractographic analysis were performed to assess structure-property relationship of present nanocomposites.