DSC study of the cure kinetics during nanocomposite formation: Epoxy/poly(oxypropylene) diamine/organically modified montmorillonite system

The effect of an organically modified montmorillonite (OMMT) on the curing kinetics of a thermoset system based on a bisphenol A epoxy resin and a poly(oxypropylene)diamine curing agent were studied by means of differential scanning calorimetry (DSC) in isothermal and dynamic (constant heating rate) conditions. Montmorillonite and prepared composites were characterized by X‐ray diffraction analysis (XRD) and simultaneous differential scanning calorimetry–thermogravimetric analysis (DSC–TGA). Analysis of DSC data indicated that the presence of the filler has a very small effect on the kinetics of cure. A kinetic model, arising from an autocatalyzed reaction mechanism, was applied to the DSC data. Fairly good agreement between experimental and modeling data was obtained. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 550–557, 2006     

Isothermal and nonisothermal cure kinetics of an epoxy/poly(oxypropylene)diamine/octadecylammonium modified montmorillonite system

The effect of an octadecylammonium‐exchanged montmorillonite on the curing kinetics of a thermoset system based on a bisphenol A epoxy resin and a poly(oxypropylene)diamine curing agent were studied with differential scanning calorimetry (DSC) in isothermal and dynamic (constant‐heating‐rate) conditions. Montmorillonite and the prepared composites were characterized by X‐ray diffraction analysis and simultaneous DSC and thermogravimetric analysis. The analysis of the DSC data indicated that the intercalated octadecylammonium cations catalyzed the epoxy–amine polymerization. A kinetic model, arising from an autocatalyzed reaction mechanism, was applied to the DSC data. Fairly good agreement between the experimental data and the modeling data was obtained. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1765–1771, 2006     

Degeneration of neurons, synapses, and neuropil and glial activation in a murine Atm knockout model of ataxia-telangiectasia

Neural degeneration is one of the clinical manifestations of ataxia-telangiectasia, a disorder caused by mutations in the Atm protein kinase gene. However, neural degeneration was not detected with general purpose light microscopic methods in previous studies using several different lines of mice with disrupted Atm genes. Here, we show electron microscopic evidence of degeneration of several different types of neurons in the cerebellar cortex of 2-month-old Atm knockout mice, which is accompanied by glial activation, deterioration of neuropil structure, and both pre- and postsynaptic degeneration. These findings are similar to those in patients with ataxia-telangiectasia, indicating that Atm knockout mice are a useful model to elucidate the mechanisms underlying neurodegeneration in this condition and to develop and test strategies to palliate and prevent the disease.     

Drying of solids; estimation of the mathematical model parameters

In order to determine physical meaning of a thin‐layer mathematical model parameter, the Page model was modified and tested on numerous experimental data. Applicability of the model was tested on the drying kinetics data, X(t), of 11 different types of the porous materials and dried in a convective, vacuum and/or microwave dryers under the predetermined external process conditions. During the entire drying time the drying kinetics of all the investigated materials and heating methods were successfully correlated with the modified Page model. The evaluated values of a new parameter, t_k, corresponded to the time at which diffusion, as a governing mechanism of moisture movement through the material, started. The results were confirmed by the pore size distribution of some materials.     

Impeller geometry effect on crystallization kinetics of borax decahydrate in a batch cooling crystallizer

The effects of impeller type and diameter in a batch cooling crystallizer on the nucleation and crystal growth kinetics as well as on the shape and size distribution of borax decahydrate crystals were investigated. Two different types of impellers of various sizes were applied. Chosen impeller configurations generate completely different fluid flow patterns in the crystallizer what allows to investigate the influence of the axial and radial flow on the kinetic parameters as well. The nucleation in crystallizer was taking place by the heterogeneous nucleation mechanism at all mixing conditions. The number of crystals formed by this mechanism increases as ratio D/d_T decreases and it is higher when an axial flow pattern in crystallizer has been developed. The crystal growth rate increases with increasing the impeller size in observed supersaturation range. The radial impeller defined by ratio D₂/d_T = 0.58 could be considered as viable option for growth of borax crystal, since the further enlargement of this ratio does not increase growth rate and can only cause higher power consumption. The maxima in the coarser and finer fractions of CSD indicate a different influence of mixing conditions on the crystal grow and secondary nucleation. An axial flow pattern in crystallizer favors agglomeration of growing crystals increasing that way product mean crystal size, while radial flow results with more regular shape of borax crystals.     

Supercritical CO2 deposition and foaming process for fabrication of biopolyester–ZnO bone scaffolds

Subsequent supercritical CO₂‐assisted deposition and foaming process followed by in situ synthesis was used to fabricate functional polylactide (PLA) and polylactide–poly(?‐caprolactone) (PLA–PCL) bone scaffolds. Deposition of zinc bis(2‐thenoyltrifluoroacetonate) as a ZnO precursor onto biopolyester substrates (30 MPa; 110 °C) was followed by fast depressurization to create cellular structure. Contact time was optimized regarding the deposition yield (2 h), while PCL content in PLA was varied (1–10 wt %). Scaffolds impregnated with the precursor were treated with hydrazine alcoholic solution to obtain biopolyester–ZnO composites. Precursor synthesis and deposition onto the scaffolds was confirmed by Fourier‐transform infrared. Processed scaffolds had micron‐sized pores (d₅₀ ～ 20 μm). High open porosity (69–77%) and compressive strength values (2.8–8.3 MPa) corresponded to those reported for trabecular bone. PLA blending with PCL positively affected precursor deposition, crystallization rate, and compressive strength of the scaffolds. It also improved PLA surface roughness and wettability which are relevant for cell adhesion. ZnO improved compressive strength of the PLA scaffolds without significant effect on thermal stability. Analysis of structural, thermal, and mechanical properties of biopolyester–ZnO scaffolds testified a great potential of the obtained platforms as bone scaffolds. Proposed processing route is straightforward and ecofriendly, fast, easy to control, and suitable for processing of thermosensitive polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45824.     

Anticorrosive epoxy/clay nanocomposite coatings: rheological and protective properties

The preparation of epoxy/clay nanocomposites (NCs) and their insertion into coatings are of great importance since the NCs could enhance the protective performances. In this study, epoxy NCs with 1–10 wt% of nanoclay Cloisite 30B (C30B) were prepared by the sonication-assisted solution method. The rheological measurements of epoxy/C30B suspensions revealed non-Newtonian, shear-thinning behavior of the uncured NCs, with an increase in the viscosity, yield stress, and shear modules with increasing organoclay content, while the dispersion effectiveness of C30B decreased. A significant enhancement of the rheological parameters was observed at the second percolation threshold (4.1 vol%) due to the formation of a continuous network of 45-layer-thick tactoids. Although NCs with 1–3 wt% C30B exhibited slightly reduced mechanical and adhesion properties compared with the cured reference epoxy resin, the epoxy primer and topcoat based on NC with 1 wt% C30B generally displayed improved impact resistance and maintained flexibility, pendulum hardness, and good adhesion properties. Two-layer coating systems, i.e., NC-based primers and topcoats, had higher corrosion stability in a salt spray chamber compared to the unmodified system.     

Laurus nobilis L. oil as green corrosion inhibitor for aluminium and AA5754 aluminium alloy in 3% NaCl solution

The influence of (30%, v/v) ethanolic solution of Laurus nobilis L. oil on the corrosion inhibition of aluminium and AA5754 aluminium alloy in 3% NaCl solution was studied by weight loss method, potentiodynamic polarization, and linear polarization method. The polarization measurements show that addition of this oil in concentrations ranging from 10 ppm to 50 ppm induces a decrease of cathodic currents densities. The results confirm that AA5754 alloy has better corrosion resistance in 3% NaCl solution than pure aluminium, while the oil investigated has better inhibition action on corrosion process of pure aluminium. The surface analysis via SEM techniques indicate that the active molecules from L. nobilis L. oil absolutely retard the pitting corrosion on the specimen surfaces.     

Arabinoxylan/nanofibrillated cellulose composite films

There is an increasing interest in substituting petroleum based polymer films, for food packaging applications, with films based on renewable resources. In many of these applications, low oxygen permeability and low moisture uptake of films are required, as well as high enough strength and flexibility. For this purpose, rye arabinoxylan films reinforced with nanofibrillated cellulose was prepared and evaluated. A thorough mixing of the components resulted in uniform films. Mechanical, thermal, structural, moisture sorption and oxygen barrier characteristics of such films are reported here. Reinforcement of arabinoxylan with nanofibrillated cellulose affected the properties of the films positively. A decrease in moisture sorption of the films, as well as an increase in stiffness, strength and flexibility of the films were shown. From these results and dynamic FTIR spectra, a strong coupling between reinforcing cellulose and arabinoxylan matrix was concluded. Oxygen barrier properties were equal or better as compared to the neat rye arabinoxylan film. In general, the high nanofibrillated cellulose containing composite film, i.e. 75 % NFC, showed the best properties.     

Jammed systems in slow flow need a new statistical mechanics

The slow dynamics of granular flow is studied as an extension of static granular problems, which, as a consequence of shaking or related regimes, can be studied by the methods of statistical mechanics. For packed (i.e. 'jammed'), hard and rough objects, kinetic energy is a minor and ignorable quantity, as is strain. Hence, in the static case, the stress equations need supplementing by 'missing equations' depending solely on configurations. These are in the literature; this paper extends the equilibrium studies to slow dynamics, claiming that the strain rate (which is a consequence of flow, not of elastic strain) takes the place of stress, and as before, the analogue of Stokes's equation has to be supplemented by new 'missing equations' which are derived and which depend only on configurations.