Strut-and-tie modelling of reinforced concrete beams using genetic algorithms optimization

This paper presents a method for automatically producing optimal strut-and-tie models for the design of reinforced concrete beams. The optimal model is generated by means of an optimization problem solved by using genetic algorithms. The basic idea developed here is that from an initial random generation of possible configurations of the strut-and-tie model for the beam subjected to study, new populations of possible configurations may be generated in an iterative way by using genetic operators until reaching an optimum solution for the studied problem which corresponds to the strut-and-tie configuration which minimizes the total strain energy. In the optimal configuration, compressive struts are not enforced to be parallel, which allows representing more consistently the physical reality of the flow of forces. Furthermore, the method is more simple and easier to apply than the methods based on the concepts of evolutionary structural optimization.     

A single step process to form in-situ an alumina foam/aluminide TBC system for alloys in extreme environments at high temperatures

A new approach to manufacture a complete thermal barrier coating system in a single step is studied in the frame of the European FP7 project PARTICOAT. Spherical μm-Al particles are deposited on different substrate alloys. During the sintering process in air, the μm-Al particles are oxidized and converted into hollow alumina spheres forming a ceramic “foam” (top coat), and simultaneously an Al rich diffusion layer (bond coat) is formed in the subsurface zone of the substrate.The “green” coatings deposited by air brush on IN738, René80 and CM247 nickel based alloys were cured at 300 °C and then isothermally exposed at 800 and 1000 °C in air for up to 1000 h. The oxide formation and the microstructure of the coatings were studied by thermo gravimetrical analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy combined with energy dispersive X-ray spectroscopy (SEM-EDX).The coatings were adherent for all the substrates and temperatures tested. René80 shows the lowest mass gain whereas IN738 and CM247 show higher mass gains at the temperatures studied. Additionally, the use of reactive element oxides in the coating was investigated, demonstrating the flexibility and viability of this low cost coating concept.     

Measurement invariance of the Gifted Rating Scales—School Form across five cultural groups.

This study examined measurement invariance of the Gifted Rating Scales—School Form (GRS–S) across the United States, Puerto Rico, China, South Korea, and Turkey, using multigroup confirmatory factor analysis. A total of 1,817 students were rated by 287 teachers using either translated versions of GRS–S or the original English GRS–S. Results indicate a similar factor structure for the GRS–S across the five locations; six factors with each of the 72 items equivalently loaded to the same latent variable across groups. The metric invariance test and the factor variance and covariance invariance tests reveal that the patterns of factor loadings and the factor variances and covariances are invariant across the five groups. Moreover, the scalar invariance test indicates that item means are equivalent across the groups. These results suggest that the GRS–S has intercultural utility and can be similarly interpreted. Implications and limitations of the present research for gifted identification are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Transistor Paint: Environmentally Stable N‐alkyldithienopyrrole and Bithiazole‐Based Copolymer Thin‐Film Transistors Show Reproducible High Mobilities without Annealing

New solution processable 4‐(2‐hexyldecan)‐4H‐bisthieno[2,3‐d:3′,2′‐b]pyrrole and 4,4′‐dialkyl‐2,2′‐bithiazole‐based copolymers (PBTzDTPs) are synthesized with excellent FET performance. These novel copolymers have considerable potential in printable electronics as they have high charge carrier mobilities, excellent air stability, good solution processibility, and no requirement for post‐deposition thermal annealing, all requirements for this field of application. The thin film transistors fabricated from PBTzDTPs achieve field effect mobilities as high as 0.14 cm² V^?1 s^?1 with current on/off ratios up to 10⁶ without thermal annealing. In addition, the devices exhibit stable performance in air, showing no significant degradation over 60 days. Moreover, the polymers described here provide an excellent example of the systems in which higher mobility performance does not require higher crystalline, long‐range ordered structures. Such a system appears to be particularly promising for rapid fabrication techniques, where kinetic conditions usually prevent the development of long‐range order.     

Harmonic modelling of PV systems for probabilistic harmonic load flow studies

Probabilistic harmonic load flow (HLF) is currently enjoying renewed popularity. This is not surprising since in the near future, thousands of photovoltaic (PV) systems will be integrated into distribution systems. However, as yet, there is no model capable of explaining PV harmonic current behaviour in probabilistic HLF studies. To fill this gap, the harmonic modelling of PV systems proposed in this paper has three key points. First, it provides an effective model of the relationship between PV harmonic current emission and background harmonic voltages. Second, it statistically characterises PV harmonic currents (relative magnitude and phase angle) at different fundamental‐frequency current output intervals using historical time‐series data. In this statistical characterisation, the first fifth moments of each PV harmonic current are used to accurately approximate the raw probability density function (PDF) by means of the Legendre series. Finally, the third key point of this harmonic modelling is a method capable of determining the distribution functions of PV harmonic currents (absolute magnitude and phase angle), based on the statistical characterisation and a fundamental‐frequency probabilistic PV model. The numerical results obtained confirm the effectiveness of this PV model. Copyright © 2014 John Wiley & Sons, Ltd.     

Utilization of ramon seeds (Brosimum alicastrum swarts) as a new source material for thermoplastic starch production

The development and characterization of biodegradable polymers deriving from renewable natural sources has attracted much attention. The aim of this work was to partially characterize a thermoplastic starch obtained from the starch of seeds from the ramon tree (TPS‐RS) as an option to substitute thermoplastic starch from corn (TPS‐CS), in some of its applications. At 55% of relative humidity (RH), TPS‐RS had higher tensile strength and deformation than TPS‐CS. X‐ray diffraction analysis showed similar values in residual crystallinity (percentage of crystallinity that remains after plasticization process) in both TPS. The SEM micrographs showed a few remnant granular structures in the TPS‐RS. The FTIR showed a greater intensity in band at 1016 cm^?1 in the TPS‐CS and TPS‐RS in comparison with their corresponding native starch, indicating an increase in the amorphous region after plasticization. The TGA analysis showed greater thermal stability in TPS‐CS (340 °C) compared with TPS‐RS (327 °C). In addition, the glass transition temperature in both TPS was 24 °C. The results obtained represent a starting point to potentialize the use of TPS‐RS instead of TPS‐CS for the development of new biodegradable materials for practical applications in different areas. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44235.     

Effect of Tempering on the Oxidation Behaviour of a Roll-Grade High-Speed Steel During Thermal Cycling

Oxidation of Metals - The oxidation characteristics of a roll-grade high-speed steel with different tempering heat treatments were studied under thermal cycling conditions at 650 °C...