疲劳与蠕变复合作用下PS的应变与寿命

对PS在疲劳/蠕变复合作用下应变与寿命进行了研究。结果表明：其疲劳/蠕变曲线与纯蠕变曲线十分相似。加载时间周期越短和疲劳载荷变化越频繁。结束普弹应变阶段应变越小，进入延迟弹性变形的平台应变阶段越早。在疲劳/蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低。断裂寿命减小，疲劳/蠕变的交互损伤程度与温度密切相关，PS在较低温度的疲劳/蠕变交互损伤作用大于较高温度的交互损伤作用。随温度升高，疲劳/蠕变断裂寿命下降是疲劳和蠕变各自的单独损伤增加所致。     

盐酸二甲双胍中双氰胺检测方法的改进

采用薄层色谱法，以８５％乙醇为溶媒，以氯仿－甲醇－水（１６：１０：５）为流动相，以硅胶Ｇ为固定相，测定了盐酸二甲双胍中双氰胺，结果与部标方法一致。本法与部标方法比较，具有简便、快速、灵敏、所用试剂毒性小等特点。     

Pb2+ binding by polyaspartyl polymers and their application to Pb2+ removal from glycyrrhizin

Polyaspartate is an excellent Pb²⁺‐binding agent in comparison with some polyaspartamide derivatives with different side chains, in that it possesses a higher Pb²⁺ uptake and a lower Pb²⁺ equilibrium concentration. Equilibrium sorption data for Pb²⁺ on polyaspartate can be well fitted with the Freundlich and Langmuir models. Experimental results show that a crosslinked polyaspartate hydrogel is superior to poly(acrylic acid)‐based resins and polystyrene‐based chelating resins. IR spectra and X‐ray photoelectron spectra reveal that the polyaspartate hydrogel binds Pb²⁺ by both an ion‐exchange mechanism and a chelating mechanism. The polyaspartate hydrogel is also an effective agent for the removal of Pb²⁺ from glycyrrhizin. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2215–2220, 2005     

Production of antimicrobially active silk proteins by use of metal‐containing dyestuffs

The work presented here discusses a new technique for preparing silk fibers and films with persistent antimicrobial activity through use of metallic dyestuffs during the fiber dyeing process. The length of the silk fibers investigated contracted when the fibers were immersed in concentrated neutral salt solutions, such as calcium or potassium nitrate, at elevated temperature levels. The birefringence and molecular orientation of the silk fibroin molecules became less ordered by the action of the neutral salt solutions, resulting in increased dyestuff absorption. Subsequently, contracted silk fibers were dyed with metallic dyestuffs containing Cr or Cu for the purpose of obtaining silk fibers with antimicrobial activity. Silk fibers dyed with metallic dyestuffs showed significant antimicrobial activity against the plant pathogen Cornebacterium and the human pathogen Coli bacillus. Tensile strength of the silk fibers after the salt shrinking and dyeing processes did not show a significant change, whereas the elongation at break was increased slightly. The techniques described here for preparing significantly active antimicrobial silk fibers are effective and economic ways of providing new materials for industrial and biomedical applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1181–1188, 2002     

雷达波吸收性聚氨酯泡沫塑料的研究

通过对碳纤维、碳纤维/纤维Ⅰ和碳纤维/纤维Ⅱ分别填充的硬质聚氨酯泡沫塑料的吸波性能的研究,探讨了纤维类型、纤维含量、样品厚度的相关变化对塑料样板吸波性能的影响。结果表明,填充碳纤维的硬质聚氨酯泡沫塑料的吸波频带较窄;纤维Ⅰ和纤维Ⅱ分别与碳纤维混杂均可展宽频带;吸波性能随塑料样板厚度的增加而增强,随纤维Ⅱ含量的增加,吸收峰向低频移动,峰值增大。     

新型干法生产配料方案的选择

新型干法生产技术的核心即预分解技术在我国的水泥生产中已越来越多地被采用。随着国家对“四小”企业政策的出台,由原立窑企业投资建设的新型干法生产线越来越多,但一些厂家并未适用新型干法生产的特殊要求,仍旧延续原立窑厂特有的一套管理方法,造成资源上一些不必要的浪费,生     

Dynamic mechanical properties of polycarbonate and acrylonitrile–butadiene–styrene copolymer blends

Blends of polycarbonate (PC) and poly(acrylonitrile‐co‐butadiene‐co‐styrene) (ABS) with different compositions are characterized by means of dynamic mechanical measurements. The samples show phase separation. The shift in the temperatures of the main dynamic mechanical relaxation shown by the blend with respect to those of the pure components is attributed to the migration of oligomers present in the ABS toward the PC in the melt blending process. A comparison with other techniques (dielectric and calorimetric analysis) and the application of the Takayanagi three block model confirm this hypothesis. In all the studied blend compositions (ABS weight up to 28.6%) the PC appears as the matrix where a disperse phase of ABS is present. The scanning and transmission electron microscopy micrographs show that the size of the ABS particles increases when the proportion of ABS in the blend increases. The FTIR results indicate that the interaction between both components are nonpolar in nature and can be enhanced by the preparation procedure. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1507–1516, 2002     

Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Amphoteric water‐soluble copolymer for barium titanate slurries. I. Synthesis and dispersing ability

An amphoteric water‐soluble copolymer, polyacrylamide/[α‐N,N‐dimethyl‐N‐(3‐(β‐carboxylate)acrylamino)propyl] ammonium ethanate (PAM/DAE) was synthesized and used as a dispersion agent for BaTiO₃ particles. PAM/DAE was prepared from acrylamide and [α‐N,N‐dimethyl‐N‐(3‐(β‐carboxylate)acrylamino)propyl] ammonium ethanate in a basic condition through a free‐radical polymerization. The structure of this copolymer was verified by IR and ¹H‐NMR spectra. The dispersing effects of PAM/DAE were examined by measuring the viscosity and sedimentation of BaTiO₃ suspensions, and by analyzing the particle size. The results indicate that this copolymer could uniformly disperse the particles, and the resulting suspensions were less viscous, more stabilized, and contained powder with smaller particle size. The dispersing/stabilizing ability of PAM/DAE is close to, or slightly better than, that of a commercial dispersant, ammonium salt of poly(methacrylic acid). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1443–1450, 2005