Assessment of elastic parameters of human skin using dynamic elastography

Sonoelastography and transient elastography are two ultrasound-based techniques that facilitate noninvasive characterization of the viscoelastic properties of soft tissues by investigating their response to shear mechanical excitation. Young's modulus is the principle assessment parameter. Because it defines local tissue stiffness, it is of major interest for the medical imaging and cosmetic industries as it could replace subjective palpation by yielding local, quantitative information. In this paper, we describe a new high-resolution device capable of measuring local Young's modulus in very thin layers (1-5 mm) and devoted to the in vivo evaluation of the elastic properties of human skin. It uses an ultrasonic probe (50 MHz) for tracking the displacements induced by a 300 Hz shear wave generated by a ring surrounding the transducer. The displacements are measured using a conventional cross-correlation technique between successive ultrasonic back-scattered echoes. First, this noninvasive technique has been experimentally proven to be accurate for investigating elasticity in different skin-mimicking phantoms. Second, data were acquired in vivo on human forearms. As expected, Young's modulus was found to be higher in the dermis than in the hypodermis and other soft tissues.     

Sequestration of Host Plant Glucosinolates in the Defensive Hemolymph of the Sawfly Athalia rosae

Interactions between insects and glucosinolate-containing plant species have been investigated for a long time. Although the glucosinolate–myrosinase system is believed to act as a defense mechanism against generalist herbivores and fungi, several specialist insects use these secondary metabolites for host plant finding and acceptance and can handle them physiologically. However, sequestration of glucosinolates in specialist herbivores has been less well studied. Larvae of the turnip sawfly Athalia rosae feed on several glucosinolate-containing plant species. When larvae are disturbed by antagonists, they release one or more small droplets of hemolymph from their integument. This reflex bleeding is used as a defense mechanism. Specific glucosinolate analysis, by conversion to desulfoglucosinolates and analysis of these by high-performance liquid chromatography coupled to diode array UV spectroscopy and mass spectrometry, revealed that larvae incorporate and concentrate the plant's characteristic glucosinolates from their hosts. Extracts of larvae that were reared on Sinapis alba contained sinalbin, even when the larvae were first starved for 22 hr and, thus, had empty guts. Hemolymph was analyzed from larvae that were reared on either S. alba, Brassica nigra, or Barbarea stricta. Leaves were analyzed from the same plants the larvae had fed on. Sinalbin (from S. alba), sinigrin (B. nigra), or glucobarbarin and glucobrassicin (B. stricta) were present in leaves in concentrations less than 1 mol/g fresh weight, while the same glucosinolates could be detected in the larvae's hemolymph in concentrations between 10 and 31 mol/g fresh weight, except that glucobrassicin was present only as a trace. In larval feces, only trace amounts of glucosinolates (sinalbin and sinigrin) could be detected. The glucosinolates were likewise found in freshly emerged adults, showing that the sequestered phytochemicals were transferred through the pupal stage.     

Parameter identification and computational simulation of polyurethane foaming process by finite pointset method

Numerical simulation of the polyurethane foaming process is a valuable method to analyze the molding process at an early stage of product development to shorten time-to-market cycles and cut costs by using fewer prototypes. However, this process involves highly coupled thermo-chemo-rheological modeling and needs adequate model parameters’ identification. A theoretical model including chemical reactions and thermo-rheological coupling of conservation equations was developed. Based on the theoretical model, three-dimensional numerical simulation for mold filling of the polyurethane foam was carried out by using Finite Pointset Method (FPM) to predict flow field, flow front advancement, temperature and density distributions during mold filling. A FOAMAT system was used to monitor foam height rise and reaction temperature on a cylindrical test tube and foam viscosity was measured by using a dynamic rotational rheometer with parallel-plate system. The parameters of the model were identified by an inverse analysis method which consists in determining the parameters by comparing the computed quantities to those measured experimentally. The overall modeling was validated by using short shot foams obtained with a panel mold cavity. Mold filling of an automotive underlay carpet cavity was investigated numerically. Flow front results were successfully compared to short shot foams obtained with the industrial mold cavity.     

Pinned OS/Services: A Case Study of XML Parsing on Intel SCC

Nowadays,we are heading towards integrating hundreds to thousands of cores on a single chip.However,traditional system software and middleware are not well suited to manage and provide services at such large scale.To improve the scalability and adaptability of operating system and middleware services on future many-core platform,we propose the pinned OS/services.By porting each OS and runtime system(middleware) service to a separate core(special hardware acceleration),we expect to achieve maximal performance gain and energy efficiency in many-core environments.As a case study,we target on XML(Extensible Markup Language),the commonly used data transfer/store standard in the world.We have successfully implemented and evaluated the design of porting XML parsing service onto Intel 48-core Single-Chip Cloud Computer(SCC) platform.The results show that it can provide considerable energy saving.However,we also identified heavy performance penalties introduced from memory side,making the parsing service bloated.Hence,as a further step,we propose the memory-side hardware accelerator for XML parsing.With specified hardware design,we can further enhance the performance gain and energy efficiency,where the performance can be improved by 20% with 12.27% energy reduction.     

Synthesis and characterization of chloro-sulphide glass-ceramics containing neodymium(III) ions

In this paper, we describe the preparation of Nd³⁺ doped glass-ceramics in the (GeS₂)₇₀-(Ga₂S₃)₂₀-(CsCl)₁₀ system. Neodymium has been introduced as metallic powder or incorporated as sulphide. Appropriate heat treatments of the base-glass lead to glass-ceramics with controllable crystal sizes that are transparent in the visible and infrared spectral ranges. X-ray diffraction as well as electron diffraction techniques were used to investigate the crystallization process. Differential scanning calorimetry indicates that neodymium ions are poor nucleating agents in this glass compared to erbium ions. Luminescence measurements were also performed and point out that although the ceramization process increases significantly the luminescence efficiency, the neodymium ions are only partially incorporated in the nanocrystals.     

Thulium and Ytterbium-Doped Titanium Oxide Thin Films Deposited by Ultrasonic Spray Pyrolysis

Thin films of thulium and ytterbium-doped titanium oxide were grown by metal-organic spray pyrolysis deposition from titanium(IV)oxide bis(acetylacetonate), thulium(III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate) and ytterbium(III) tris(acetylacetonate). Deposition temperatures have been investigated from 300 to 600 °C. Films have been studied regarding their crystallinity and doping quality. Structural and composition characterisations of TiO₂:Tm,Yb were performed by electron microprobe, x-ray diffraction, and Fourier transform infrared spectroscopy. The deposition rate can reach 0.8 μm/h. The anatase phase of TiO₂ was obtained after synthesis at 400 °C or higher. Organic contamination at low deposition temperature is eliminated by annealing treatments.     

From Suitable Weak Solutions to Entropy Viscosity

This paper focuses on the notion of suitable weak solutions for the three-dimensional incompressible Navier-Stokes equations and discusses the relevance of this notion to Computational Fluid Dynamics. The purpose of the paper is twofold (i) to recall basic mathematical properties of the three-dimensional incompressible Navier-Stokes equations and to show how they might relate to LES (ii) to introduce an entropy viscosity technique based on the notion of suitable weak solution and to illustrate numerically this concept.     

Modelling and Characterizing a Screen-Printed Metallic Electrothermal Microactuator

A metallic electrothermal microactuator has been fabricated with screen-printing technology based on a sacrificial layer process. The actuator, printed on a standard 96% alumina, consists of two linked copper beams of different widths partially suspended above the substrate to which they are anchored. Energy-dispersive X-rays analyses demonstrate the harmlessness of the process with regard to the metallic layer. While increasing DC voltage between both anchors of the electrothermal microactuator, the deflection is optically measured using a calibrated CCD camera. The temperature distribution measured with an infrared camera in the actuator compares well with that calculated with finite element simulations.     

The impact of a sewage treatment plant's effluent on sediment quality in a small bay in Lake Geneva (Switzerland–France). Part 2: Temporal evolution of heavy metals

The Bay of Vidy is the most contaminated area of Lake Geneva, Switzerland, as a result of the release of treated and untreated waste water from the municipal sewage treatment plant of the city of Lausanne and its surroundings. The reconstruction of the historical deposition of heavy metals in the sediment of the bay has been performed by the analysis of several dated (radiocaesium) sediment cores. The presence of sewage‐derived contaminants in the Bay of Vidy since the beginning of the sewage treatment plant's operations in 1964 is clearly observed, when a sharp increase in heavy metal contents is recorded, with maximum concentrations of cadmium, copper, zinc and lead occurring between the late 1960s and early 1970s. Despite considerable improvement in recent times, the present concentrations of the investigated heavy metals in sediments of the Bay of Vidy are still higher than concentrations measured at the centre of the lake, the latter close to Lake Geneva's natural background values. It is concluded that the quantity of heavy metals deposited in the bay is considerable and, because of sediment instability, will constitute a potential hazard for biota.