Single-run separation of closely related cationic and anionic compounds by CE-ESI-MS: application to the simultaneous analysis of melamine and its analogs in milk

In recent years, two adulteration incidents concerning the addition of melamine, a nitrogen-rich industrial small polar compound, to pet food and infant formula products have occurred in China. These issues prompted laboratories to develop methods for the analysis of melamine and related compounds in a wide variety of food products and ingredients. In this context, a CE-ESI-MS method was developed to simultaneously analyze melamine and its related products (ammeline, ammelide and cyanuric acid) that possess close physico-chemical properties. This method allows the simultaneous analysis of both cations and anions in a single run, using CE to divide the run into two time segments in normal polarity mode. For this purpose, ESI polarity was switched once during the run, increasing sensitivity and data quality. The method was applied to spiked powdered milk and melamine-contaminated powdered milk, with two sample preparation procedures.     

Development of Oxide Scale at 1,100 °C on Fe20Cr5Al Alloy Non-Implanted and Yttrium-Implanted

The development of the oxide scale on model Fe20Cr5Al-type alloys unmodified and containing implanted yttrium was studied in oxygen-dominated atmosphere at 1,100 °C for up to 1 h. A two-stage-oxidation exposure was applied with the use of ¹⁸O₂ as a tracer. The choice of the exposure durations ensured the possibility to follow the consecutive stages of scale development. The oxidized samples were characterized using SEM (morphology); PLS (phase composition), and SIMS (elemental distributions). The obtained results are discussed in terms of the mechanism of the development of protective α-Al₂O₃ scale and the effect of the additions on this process taking into account the necessity of distinguishing the mechanism and kinetics of the scale evolution. Similar scale evolution stages were found on both studied materials and in both cases the protective α-Al₂O₃ scale developed rapidly, already after the exposure for 3 min. Implanted yttrium appeared to have a negligible effect on the evolution of the scale. It only slightly retarded the evolution which can be attributed rather to a kinetic effect than to mechanistic one. However, the mechanical failure of the scales via formation of cracks at the asperities of convolutions occurred on the yttrium-implanted alloy but not on the non-implanted one.     

Mechanism underlying cuticular hydrocarbon homogeneity in the antCamponotus vagus (SCOP.) (Hymenoptera: Formicidae): Role of postpharyngeal glands

The aim of the present study was to investigate the regulation and the homogeneity of the chemical signature between members ofCamponotus vagus after experimentally changing the cuticular chemical signature by topically applying hydrocarbons. Topical application of pentane (solvent) to the cuticle of isolated workers led to a significant decrease in the quantities of the cuticular hydrocarbons measured within 3 hr, followed by an increase within the following 3 hr and a period of relative stability from 9 hr to 14 days. On the other hand, after topical application to isolated workers ofn-tetracosane, a hydrocarbon existing only in trace quantity in this species, the quantity of this hydrocarbon measured over time in the epicuticular wax tended to level out at about 14 days after treatment. In contrast, topically applied (Z)-9-tricosene, an unsaturated hydrocarbon not normally synthesized by this species, decreased dramatically within a few hours and had completely disappeared within 14 days. (Z)-9-Tricosene applied to one member of a group was present in the postpharyngeal glands of the other members from 30 min to seven days of cohabitation. The highest levels were recorded in all six workers in each group after one day. GC-MS analyses showed that (Z)-9-tricosene was present in the cuticles of some untreated workers only after four and seven days of cohabitation with a treated worker. These data suggest: (1) that the deposited (Z)-9-tricosene decreased very quickly on the cuticle of the treated worker, although the total amount was spread over the cuticle and postpharyngeal gland and (2) that it was absorbed by the nontreated workers via the postpharyngeal glands during licking or grooming activities and reincorporated into the cuticle at four and seven days. When the treated worker was separated from the other ants by a wire mesh, (Z)-9-tricosene was detected neither in the cuticle nor in the postpharyngeal gland of nontreated workers.     

Validation ďun modèle analytique de la pose par poussage des câbles à fibres optiques

The construction of an entire optical access networks for connected customers requires the mastery of optical fibre cable installation. We are interested in the pushing process in urban areas and the understanding of the global behaviour during this process and the estimation of the pushing force before laying are important. The work of Griffioen [5] and Buler [4] were used to develop software (taking into account friction and cable rigidity), including some improvements coming from a collaboration between France Télécom R&D Lannion and the LM2S. To go further in this process, in the first part of our work, we will work without buckling phenomena, that will be included in our modelisation in the second part of this paper. In order to validate our modelisation, comparison will be made between finite element simulations and experimental results obtained on a life-sized bench at France Télécom R&D Lannion.     

The undecimated wavelet decomposition and its reconstruction.

This paper describes the undecimated wavelet transform and its reconstruction. In the first part, we show the relation between two well known undecimated wavelet transforms, the standard undecimated wavelet transform and the isotropic undecimated wavelet transform. Then we present new filter banks specially designed for undecimated wavelet decompositions which have some useful properties such as being robust to ringing artifacts which appear generally in wavelet-based denoising methods. A range of examples illustrates the results.     

Spatial and temporal variations of niphargus populations in interstitial aquatic habitat at the karst/floodplain interface

Artificial substrates buried in stream sediments at the karst/floodplain interface were used to examine the spatial and temporal variations of Niphargus populations. The study was carried out at two stations in two different areas of the French Jura. One was mainly supplied by karst water (Verna station), the other by both karst and surface waters (Pissoir station). The occupation of interstitial habitat was found to depend on several interacting factors:

• 1 The waterflow and its changes at the outlet. The correlation between abundance of individuals and discharge was strongest with the discharges two to four days before sampling. The structure and restoration of populations after a spate related to geological characteristics. In particular, restoration was slower and more difficult in the sediments located at the base-level of a massif (Verna) than at an overflow level (Pissoir).
• 2 The location of the sediments. At the Pissoir station, the number of individuals was higher at the main outflow, but also for both stations, on the banks opposite the outlet. Animals drifting from the karst system found refuge in the sediment of the opposite bank. Almost no Niphargus were found upstream from the outlets. At the Verna station, Niphargus were only found inside the cave.
• 3 The variability of the number of animals at different depths in the sediment was more difficult to explain. At the station mainly supplied by karst water, which presented a relatively constant flow during the study, the distribution seemed to be random. At the other station, where discharge varied considerably, the vertical distribution globally presented a gradient in abundance with more individuals in the upper sediment level. This gradient varied according to the samples. Discharge changes partly explained these results.

     

The RAMI On-line Model Checker (ROMC): A web-based benchmarking facility for canopy reflectance models

The exploitation of global Earth Observation data hinges increasingly on physically-based radiative transfer (RT) models. These models simulate the interactions of solar radiation within a given medium (e.g., clouds, plant canopies) and are used to generate look-up-tables that are embedded into quantitative retrieval algorithms, such as those delivering the operational surface products for MODIS, MISR and MERIS. An assessment of the quality of canopy RT models thus appears essential if accurate and reliable information is to be derived from them. Until recently such an undertaking was a time consuming and labour intensive process that was made even more challenging by the general lack of absolute reference standards. Several years of benchmarking activities in the frame of the RAdiation transfer Model Intercomparison (RAMI) exercise have now led to the development of the RAMI On-line Model Checker (ROMC). The ROMC is a web-based tool allowing model developers and users to autonomously assess the performance of canopy RT models (http://romc.jrc.ec.europa.eu/). Access to the ROMC is free and enables users to obtain both statistical and graphical indications as to the performance of their canopy RT model. In addition to providing an overall indication of the skill of a given model to correctly match the reference data, the ROMC allows also for interactive comparison/evaluations of different model versions/submissions of a given user. All ROMC graphs can be downloaded in PostScript format and come with a reference number for easy usage in presentations and publications. It is hoped that the ROMC will prove useful for the RT modeling community as a whole, not only by providing a convenient means to evaluate models outside the triennial phases of RAMI but also to attract participation in future RAMI activities.     

Initial Sintering of Submicrometer Titania Anatase Powder

Measurements of surface area reduction of TiO₂ anatase powder (of initially 100 m²· g⁻¹) were carried out for various partial pressures of water and oxygen at 823 K. The kinetic equation obtained for the experimental rates has the formulation r = k[P _H2O]^1/α [ P _O2]^1/β where α and β are equal to 2 and -12, respectively. A mechanistic model involving six consecutive elementary steps was developed, in which hydroxyl species play a dominant role. No geometrical assumption is required. The general expression of the deduced theoretical rates has the same form as previously given. The comparison between the experimental and the predicted rates points out that the rate-limiting step is the surface diffusion of hydroxyl species. This model can easily be used for any other compounds, for particle growth, and for porosity elimination.     

Mask spoofing in face recognition and countermeasures

In this paper, initially, the impact of mask spoofing on face recognition is analyzed. For this purpose, one baseline technique is selected for both 2D and 3D face recognition. Next, novel countermeasures, which are based on the analysis of different shape, texture and reflectance characteristics of real faces and mask faces, are proposed to detect mask spoofing. In this paper, countermeasures are developed using both 2D data (texture images) and 3D data (3D scans) available in the mask database. The results show that each of the proposed countermeasures is successful in detecting mask spoofing, and the fusion of these countermeasures further improves the results compared to using a single countermeasure. Since there is no publicly available mask database, studies on mask spoofing are limited. This paper provides significant results by proposing novel countermeasures to protect face recognition systems against mask spoofing.