Editorial: Biodegradable Materials

This Special Issue “Biodegradable Materials” features research and review papers concerning recent advances on the development, synthesis, testing and characterisation of biomaterials. These biomaterials, derived from natural and renewable sources, offer a potential alternative to existing non-biodegradable materials with application to the food and biomedical industries amongst many others. In this Special Issue, the work is expanded to include the combined use of fillers that can enhance the properties of biomaterials prepared as films. The future application of these biomaterials could have an impact not only at the economic level, but also for the improvement of the environment.     

Treatment of Point Defects in Nanowire MOSFETs Using the Nonequilibrium Green’s Function Formalism

A program to numerically simulate point defects in nanowire metal-oxide-semiconductor field-effect transistors is described. The simulation scheme is based on the non-equilibrium Green’s function method self-consistently being obtained via the resolution of 3D Poisson’s equation. A tight-binding hamiltonian is used and the point defect is characterized by a macroscopic coulombic tail treated in the mode-space approach, plus a short range on-site perturbation potential energy, treated exactly. The effect on internal quantities and on the transistor characteristics is studied as a function of the strength and the location of the defect potential. Subthreshold current is found to vary in a factor 10 according to the position of the impurity.Also With Institut Universitaire De France (IUF).     

Quantitative biodistribution and pharmacokinetics of multimodal gadolinium-based nanoparticles for lungs using ultrashort TE MRI

Objective

To study the biodistribution and lung pharmacokinetics of tracheally administered gadolinium-based contrast agents [gadoteric acid and multimodal ultra-small rigid platforms (USRPs)], to validate their pharmacokinetics against optical imaging of fluorescent USRPs, and to test their short-term toxicity.

Materials and methods

Ultrashort echo-time (UTE) lung proton magnetic resonance imaging (MRI) was performed at 4.7-Tesla (T) after the intratracheal instillation of different concentrations of contrast agent solutions in mice. Pharmacokinetic models were implemented on the absolute concentration calculated from the MRI signal enhancement measurements. Fluorescent USRPs were used to obtain optical images with the same protocol. Bronchoalveolar lavage inflammatory cell count and serum creatinine measurement were performed on four groups of instilled mice (sham, saline, USRPs, lipopolysaccharide).

Results

MR and optical imaging showed similar kinetics of the USRPs, passing from the airways to the lung tissue and to the kidneys, with negligible hepatic clearance. No significant increase of lung and renal inflammation markers were observed in USRP-instilled animals.

Conclusion

A T ₁-weighted radial UTE sequence was found to be valuable in quantitatively monitoring the biodistribution and pharmacokinetics of nanoparticles in the lungs of mice. The observed favorable pharmacokinetics, which was validated by fluorescence imaging, ensures the negligible toxicity of the nanoprobes, making the USRPs and the developed protocol good candidates for applications on selected lung diseases.     

Dielectric,ferroelectric, and energy storage properties in dysprosium doped sodium bismuth titanate ceramics

In this work, Na_0.5(Bi_1-xDy_x)_0.5TiO₃ (0?≤?x?≤?15%) ceramics were prepared via solid state reaction method and were characterized. A stable and pure perovskite phase was revealed by X-ray diffraction analysis for all compositions and a symmetry change from rhombohedral to orthorhombic phase was detected beyond 10% of Dy substitution. The incorporation of Dy³⁺ into Sodium Bismuth Titanate (Na_0.5Bi_0.5TiO₃) matrix allows a substantial decrease of the coercive field, an increase in the resistivity, and leads to a high stability of the dielectric permittivity (??/?_(150?°C) ≤?±?15%) over a wide temperature range. Furthermore, this system was found to exhibit improved energy storage properties at high temperatures with a maximum energy density of 1.2?J/cm³ obtained for 2%Dy composition at 200?°C. The obtained results are very promising for energy storage capacitors operating at high temperatures.     

Sex recognition inDiglyphus isaea walker (Hymenoptera: Eulophidae): Role of an uncommon family of behaviorally active compounds

The sexual behavior of the ectoparasitoidDiglyphus isaea is described. Recognition of the female by the male occurs at close range. Males initiate courtship behavior in the presence of a living female regardless of age, as well as in the presence of a female killed by freezing. Courtship behavior is not observed in the presence of a dead female washed with organic solvents but could be elicited using a lure covered with a female organic extract. These findings demonstrate that each sex develops a specific chemical signature that can be dissolved in hexane and transferred to a lure. Analysis of organic extracts by gas chromatography revealed chemical dimorphism between the two sexes. Gas chromatography coupled with mass spectrometry showed that the main components in females were esters of medium-chain fatty acids and long-chain 11-alcohols. There were few hydrocarbons. Female esters, which were present in only small proportions in males, were recovered in the nonhydrocarbon fraction obtained after fractionation of the total extract on a silica-filled microcolumn as a mixture containing 11-heneicosyl, 11-docosyl, 11-tricosyl, 11-tetracosyl, and 11-pentacosyl octanoate, and 11-docosyl, 11-tricosyl, 11-tetracosyl, and 11-pentacosyl decanoate. These results demonstrate that there is a specific gender-related chemical signature.     

Assessing the Antimicrobial Activity of Polyisoprene Based Surfaces

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the “miracle solution” has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.     

Chalcogenide Glasses for Infrared Photonics

The last advances in the synthesis and shaping techniques of chalcogenide glasses suitable for infrared photonics are reported. Ball milling combined with spark plasma sintering allows the preparation of bulk chalcogenide glasses at lower temperature and at lower cost. Microstructuring of optical fibers results in enhanced nonlinear properties leading to the demonstration of low-threshold Brillouin laser at 1.55 μm, all-optical wavelength conversion and time-domain demultiplexing with a 170 Gb/s rate, and supercontinuum between 1.5 and 2.8 μm. The potential of integrated waveguides for functions such as near-IR sensing, mid-IR injection, and (bio)-chemical functionalization is shown.     

Modelling and Characterizing a Screen-Printed Metallic Electrothermal Microactuator

A metallic electrothermal microactuator has been fabricated with screen-printing technology based on a sacrificial layer process. The actuator, printed on a standard 96% alumina, consists of two linked copper beams of different widths partially suspended above the substrate to which they are anchored. Energy-dispersive X-rays analyses demonstrate the harmlessness of the process with regard to the metallic layer. While increasing DC voltage between both anchors of the electrothermal microactuator, the deflection is optically measured using a calibrated CCD camera. The temperature distribution measured with an infrared camera in the actuator compares well with that calculated with finite element simulations.     

Microtribology,squeeze, and friction of the colloidal layer

Lubricant films containing colloidal overbased calcium salts have particular effects on detergency and on the wear process. The mechanical properties of such boundary films are very dependent on the process conditions, and are essentially a result of physico-chemical transformations of the colloid. Three types of films were compared: a film obtained by the drying of the base solvent, a film due to the compaction of the colloid between two steel surfaces, and a friction film obtained with this type of lubricant. Adsorption, compaction, and shear transformations induce a solid film. The pressure effect on the frictional behaviour of these colloidal films has been investigated using a surface force apparatus for low contact pressure (10⁴ to 10⁶ Pa), and using tribometers supporting heavy loads for the analysis of the high pressure domain. Above a critical pressure, evaluated at 10⁶ Pa, the colloidal film does not flow, but forms a compacted mattress sliding on the surface plane and squeezing a molecular layer of lubricant.