Particle sizing with a fast polar nephelometer

We reported previously the design of a polar nephelometer that uses a rotational confocal imaging setup to enable fast scanning of the scattering phase function within a field of view of 55 degrees . The full dynamic range of the detection system can be used by increasing the signal-to-noise ratio by means of averaging successive scans. The calibration of the angular response of the instrument is achieved by obtaining the transfer function of the optical detection system using Rayleigh scatterers. Accurate particle sizing of individual polystyrene spheres (ranging from 1.5 to 9 micro m in diameter) in aqueous suspension is achieved by maximizing a correlation coefficient between precalculated tables of Mie phase functions and data obtained from the polar nephelometer. Good correlation is achieved between experimental and theoretical data, proving the functioning of the instrument as a fast and convenient particle sizer.     

Estimation of polyvinyl alcohol cryogel mechanical properties with four ultrasound elastography methods and comparison with gold standard testings

Tissue-mimicking phantoms are very useful in the field of tissue characterization and essential in elastography for the purpose of validating motion estimators. This study is dedicated to the characterization of polyvinyl alcohol cryogel (PVA-C) for these types of applications. A strict fabrication procedure was defined to optimize the reproducibility of phantoms having a similar elasticity. Following mechanical stretching tests, the phantoms were used to compare the accuracy of four different elastography methods. The four methods were based on a one-dimensional (1-D) scaling factor estimation, on two different implementations of a 2-D Lagrangian speckle model estimator (quasistatic elastography methods), and on a 1-D shear wave transient elastography technique (dynamic method). Young's modulus was investigated as a function of the number of freeze-thaw cycles of PVA-C, and of the concentration of acoustic scatterers. Other mechanical and acoustic parameters-such as the speed of sound, shear wave velocity, mass density, and Poisson's ratio-also were assessed. The Poisson's ratio was estimated with good precision at 0.499 for all samples, and the Young's moduli varied in a range of 20 kPa for one freeze-thaw cycle to 600 kPa for 10 cycles. Nevertheless, above six freeze-thaw cycles, the results were less reliable because of sample geometry artifacts. However, for the samples that underwent less than seven freeze-thaw cycles, the Young's moduli estimated with the four elastography methods showed good matching with the mechanical tensile tests with a regression coefficient varying from 0.97 to 1.07, and correlations R2 varying from 0.93 to 0.99, depending on the method.     

Hole-vibronic coupling in oligothiophenes: impact of backbone torsional flexibility on relaxation energies

Density functional theory calculations together with highly resolved gas-phase ultraviolet photoelectron spectroscopy have been applied to oligothiophene chains with up to eight thiophene rings. One of the important parameters governing the charge transport properties in the condensed phase is the amount of energy relaxation upon ionization. Here, we investigate the impact on this parameter of the backbone flexibility present in oligothiophenes as a result of inter-ring torsional motions. With respect to oligoacenes that are characterized by a coplanar and rigid backbone, the torsional flexibility in oligothiophenes adds to the relaxation energy and leads to the broadening of the first ionization peak, making its analysis more complex.     

Nuclear Magnetic Resonance of Physisorbed 129Xe Used as a Probe to Investigate Porous Solids

Xenon is an inert gas with a large electronic environment that makes it sensitive to any interaction, even physical. In the case of ¹²⁹Xe isotope (spin 1/2), the resulting electronic perturbation is directly transmitted to the nucleus and, therefore, affects the nuclear magnetic resonance chemical shift. In this review, we report exhaustively up to 1996 the many applications of this technique in both fundamental and applied research in the fields of microporous and mesoporous solids.     

Long-term behavior of oil-based varnishes and paints I. Spectroscopic analysis of curing drying oils

The curing of drying oils at 60°C has been investigated by Fourier transform infrared spectroscopy and Fourier transform Raman analysis of linseed oil and poppyseed oil. In the first step, hydroperoxides are formed (broad vibration band centered around 3425 cm⁻¹) with concomitant conjugation and cis-trans isomerization of the double bonds (disappearance of cis bands at 3011 and 716 cm⁻¹, appearance of trans conjugated and trans nonconjugated bands at 987 and 970 cm⁻¹). The subsequent decomposition of hydroperoxides in the presence of oxygen leads to the formation of alcohols (nitrite band at 779 cm⁻¹ after nitrogen monoxide treatment), aldehydes (bands at 2810 and 2717 cm⁻¹ in gas phase), ketones (saturated and unsaturated at 1720 and 1698 cm⁻¹, respectively), carboxylic acids (saturated and unsaturated acid fluorides identified at 1843 and 1810 cm⁻¹ after SF₄ treatment), and peresters or γ-lactones (near 1770 cm⁻¹). A rapid decrease in the double-bond concentration is recorded when curing continues, and the formation of epoxides, characterized by a vibration band at 885 cm⁻¹, is observed. Thermolysis experiments have suggested the proposal of a reaction of addition of peroxyl radicals on the conjugated double bonds as a probable mechanism. This mechanism explains both the rapid disappearance of conjugated double bonds and the formation of epoxides as intermediate products observed in the initial step of curing.     

Influence of a metallic filler on polyurethane formation

The addition of metallic fillers is recognized to impart improvement of acoustic properties to polyurethane-based materials used for marine applications. The system under consideration was obtained by the reaction of a triisocyanateterminated prepolymer with 1,4-butanediol, in the presence of various concentrations of lead powder. With increasing lead content, gelation time is reduced and an Einstein-type law does not apply. The kinetics of the reaction were determined by Fourier transform infrared spectroscopy. Deviation from the classic second order is observed for the filled systems, and the higher the lead content, the more important the deviation is, showing undoubtedly the catalytic effect of the metallic powder.     

Early use of PbS nanotechnology for an ancient hair dyeing formula

Lead-based chemistry was initiated in ancient Egypt for cosmetic preparation more than 4000 years ago. Here, we study a hair-dyeing recipe using lead salts described in text since Greco-Roman times. We report direct evidence about the shape and distribution of PbS nanocrystals that form within the hair during blackening. It is remarkable that the composition and supramolecular organization of keratins can control PbS nanocrystal growth inside a hair.     

Stretching and breaking of a molecular junction

Density functional theory (DFT) calculations based on band structure are used to investigate the electromechanical properties of a molecular junction consisting of a dithiolbenzene molecule sandwiched between two gold slabs. This represents a prototypical system for the field of molecular electronics; such a system has previously been studied in break-junction measurements and electron-transport calculations. The stretching and breaking behavior of the junction is analyzed for different geometric conformations, and it is found that the breakage occurs through dissociation of one of the sulfur-gold bonds with a maximum force of 1.25 nN. The molecular electronic states shift during stretching, and, at the point of highest stress in the junction, the highest occupied molecular orbital (HOMO) of the molecule is located exactly at the Fermi level.     

Optimization of star-oriented and layer-oriented wavefront sensing concepts for ground layer adaptive optics

Multiconjugate adaptive optics is one of the major challenges in adaptive optics. It requires the measurement of the volumic distribution of the turbulence. Two wavefront sensing (WFS) concepts have been proposed to perform the wavefront analysis for such systems: the star-oriented and layer-oriented approaches. We give a performance analysis and a comparison of these two concepts in the framework of the simplest of the multi-guide-star adaptive optics systems, that is, ground layer adaptive optics. A phase-related criterion is proposed to assess analytically the performance of both concepts. This study highlights the main advantages and drawbacks of each WFS concept and shows how it is possible to optimize the concepts with respect to the signal to noise ratio on the phase measurement. A comparison of their optimized versions is provided and shows that one can expect very similar performance with the two optimized concepts.     

Topology, braids and mixing in fluids

Stirring of fluid with moving rods is necessary in many practical applications to achieve homogeneity. These rods are topological obstacles that force stretching of fluid elements. The resulting stretching and folding is commonly observed as filaments and striations, and is a precursor to mixing. In a space-time diagram, the trajectories of the rods form a braid, and the properties of this braid impose a minimal complexity in the flow. We review the topological viewpoint of fluid mixing, and discuss how braids can be used to diagnose mixing and construct efficient mixing devices. We introduce a new, realizable design for a mixing device, the silver mixer, based on these principles.