The invasion of a large lake by the Eurasian genotype of common reed: The influence of roads and residential construction

The Eurasian genotype of common reed (Phragmites australis) is one of the most aggressive plant invading North American wetlands. There is, however, little published evidence on establishment patterns of populations along lakes of the St. Lawrence River–Great Lakes watershed. We tested the hypothesis that the recent invasion of Great Lake Saint-François (Québec, Canada) by common reed was facilitated by a dense road system and by an intense residence construction activity along lakeshores. A total of 345 and 2914 reed stands were mapped along lakeshores, and along the road system of the study area, respectively. The probability of finding a reed stand on a lakeshore increases with the proximity of the lake's outlet, and of a paved road, but decreases with the proximity of a residence built since 1990. It is likely that common reed first spread along the road system, and that wind dispersal of seeds then favored the establishment of populations on lakeshores. Our model does not support the hypothesis that residential construction facilitated the establishment of reed stands, probably because the recent residential construction boom occurred essentially in the southern part of the lake, where the number of roadside reed populations is much lower than in the northern part (lower seed rain). The invasion of Great Lake Saint-François shows that the spread of the plant is not restricted to major river or road systems. Large or small lakes, if submitted to intense diaspore pressure, can also be at risk.     

Axisymmetric waves in electrohydrodynamic flows

The formation of nonlinear axisymmetric waves on inviscid irrotational liquid jets in the presence of radial electric fields is considered. Gravity is neglected but surface tension is considered. Electrohydrodynamic waves of arbitrary amplitude and wavelength are computed using finite-difference methods. Particular attention is paid to nonlinear traveling waves. In the first class of problems, an electric field generated by placing the liquid jet inside a hollow cylindrical electrode held at constant voltage, its axis coinciding with that of the jet, is studied. The jet is assumed to be a perfect conductor whose free surface is stressed by the electric field acting in the hydrodynamically passive annulus. In the second class of problems, the annular gas is a perfect conductor that transmits a constant voltage onto the liquid/gas surface. The liquid axisymmetrically wets a constant-radius cylindrical rod electrode placed coaxially with respect to the hollow outer electrode, and held at a different constant voltage. The fluid dynamics and electrostatics need to be addressed simultaneously in the inner region. Axisymmetric interfacial waves influenced by surface tension and electrical stresses are computed in both cases. The computations are capable of following highly nonlinear solutions and predict, for certain parameter values, the onset of interface pinching accompanied with the formation of toroidal bubbles. For given wave amplitudes, the results suggest that, for the former case, the electric field delays bubble formation and reduces wave steepness, while for the latter case the electric field promotes bubble formation, all other parameters being equal.     

Mechanical behaviour of SSRT specimens optimized for IGSCC concerns

Simulating testing conditions leading to evaluate the intergranular stress corrosion cracking sensitivity of structural alloys is crucial to estimate the lifetime of in-service components. Former studies have pointed out that a simple modification of the design of slow strain rate tensile specimens was particularly convenient for evaluating the susceptibility to intergranular stress corrosion cracking of nickel-base alloys. The aim of the present work is to characterize and model the mechanical behaviour of such specimens. Validation of proposed modelling relies mainly on tensile tests carried on specimens equipped with strain gages. One of the striking results is that, for a given displacement rate of the heads of the specimen, a much slower strain rate can be obtained locally in comparison with the strain rate of an equivalent smooth specimen.     

Dependence of the phase separation process on the relative onset of network formation in simultaneous interpenetrating polymer networks

Morphology development during the synthesis at room temperature of an interpenetrating polyurethane/poly(methyl methacrylate) network was investigated by small-angle X-ray scattering in relation with their relative kinetics of formation, determined by Fourier transform infra red spectroscopy. When the time lag between the onset of the two reactions is short, macroscopic phase separation occurs as the polyurethane network is incompletely formed. However, when the time lag increases, the poly(methyl methacrylate) forms into a more continuous network which limits the growth of phase separation to a close environment.     

Size effects on the DC characteristics and low frequency noise of double polysilicon NPN bipolar transistors

DC and low frequency noise measurements have been carried out for double polysilicon NPN bipolar transistors. Our experiments have highlighted unexpected geometrical dependencies for the base saturation current density and low frequency noise. A model, taking into account a variation of the interfacial oxide thickness at the periphery of the emitter has been proposed and it has been successfully applied to the experimental results.     

Averaging Pore Statistics of Two-Dimensional Images for Predicting Permeability

Effective medium theory (EMT) was employed to estimate permeability of fine-grained estuarine sediments. X-radiographs were taken of sediment cores collected in the field and from laboratory aquaria, designed to mimic the benthic environment of an estuary. Image analysis of two-dimensional X rays provided values of pore parameters required by the EMT model, which include pore body and throat radii, pore throat length, porosity, and the interconnectivity of pores. Values of these parameters were used to quantitatively calculate permeability based upon Darcy’s law. The EMT model with an arithmetic mean for averaging pore parameters predicted permeability 1 order of magnitude higher than measured values. The harmonic mean for averaging pore parameters in the EMT model provided estimates of permeability similar to measured values.     

Bacterial-based additives for the production of artificial snow: What are the risks to human health?

For around two decades, artificial snow has been used by numerous winter sports resorts to ensure good snow cover at low altitude areas or more generally, to lengthen the skiing season. Biological additives derived from certain bacteria are regularly used to make artificial snow. However, the use of these additives has raised doubts concerning the potential impact on human health and the environment. In this context, the French health authorities have requested the French Agency for Environmental and Occupational Health Safety (Afsset) to assess the health risks resulting from the use of such additives. The health risk assessment was based on a review of the scientific literature, supplemented by professional consultations and expertise. Biological or chemical hazards from additives derived from the ice nucleation active bacterium Pseudomonas syringae were characterised. Potential health hazards to humans were considered in terms of infectious, toxic and allergenic capacities with respect to human populations liable to be exposed and the means of possible exposure. Taking into account these data, a qualitative risk assessment was carried out, according to four exposure scenarios, involving the different populations exposed, and the conditions and routes of exposure. It was concluded that certain health risks can exist for specific categories of professional workers (mainly snowmakers during additive mixing and dilution tank cleaning steps, with risks estimated to be negligible to low if workers comply with safety precautions). P. syringae does not present any pathogenic capacity to humans and that the level of its endotoxins found in artificial snow do not represent a danger beyond that of exposure to P. syringae endotoxins naturally present in snow. However, the risk of possible allergy in some particularly sensitive individuals cannot be excluded. Another important conclusion of this study concerns use of poor microbiological water quality to make artificial snow.     

In situ study of the formation of silicide phases in amorphous Co-Si mixed layers

We investigate Co silicide phase formation when extra Si is added within an as deposited 50 nm Co film. The addition of Si is investigated for both the Co/SiO₂ and Co/Si(1 0 0) system. A series of 10 Co-Si mixed films with a Si content varying from 21 to 59 at.% was prepared and investigated during annealing with in situ X-ray diffraction. The oxide system is used as reference system to identify phases that initially crystallize in an amorphous mixture of a given composition. Multiple phases can nucleate, and the temperature of crystallization depends on the Co-Si atomic ratio. Upon heating of the Co(Si)/Si system, the first reaction is a similar crystallization reaction of the Co(Si) mixture. Once the first phase is formed, one has the normal system of a silicide phase in contact with an unlimited amount of Si from the substrate, and the sequential phase formation towards CoSi₂ is established. For deposited layers of composition ranging from 48%Si to 52%Si, the CoSi is the first phase to form and increasing the amount of Si leads to a remarkable improvement of the thermal stability of CoSi on Si(1 0 0). CoSi₂ nucleation was extensively delayed by 150 °C compared to the reaction observed from a pure Co film on Si(1 0 0). Electron backscatter diffraction measurements reveal that in this range, the gradual Si increase systematically leads to bigger CoSi grains (up to 20 μm). This shows that the grain size of the CoSi precursor strongly affects the nucleation of the following CoSi₂ phase. Laser-light scattering measurements suggest that adding more than 42%Si reduces the roughness of the CoSi₂ layer.     

Adaptation of machining toolpath to distorted geometries: application to remove a constant thickness on rough casting prosthesis

This study proposes a method to adapt the geometry of the toolpath to a specified target. In the case study presented, the geometrical target is to remove a constant thickness on the rough workpiece. This case is normally present in the polishing of the femoral component of knee prostheses. In fact, an operator carries out these operations manually. The aim of this study is to contribute to the automation of prosthesis production, notably, in the preparation of surface polishing. The proposed method can deform and adapt a toolpath to ensure the required geometry of the machined surface. The proposed toolpath deformation method is composed of three steps: alignment, toolpath deformation, and toolpath smoothing. Alignment between the measured surface of the roughcast prostheses and the nominal toolpath is carried out by an Iterative Closest Point (ICP) algorithm. The principle of this algorithm is to find the optimal rigid transformation to readjust the toolpath on the measured surface. Subsequently, the toolpath is deformed to remove the constant thickness of the roughcast prostheses. Next, to increase the machined quality, a smoothing stage is carried out on the obtained toolpath. Experimental tests on industrial prostheses geometry are conducted to validate the effectiveness of this method.