Accepting its random coil nature allows a partial NMR assignment of the neuronal Tau protein

A combined strategy to obtain a partial NMR assignment of the neuronal Tau protein is presented. Confronted with the extreme spectral degeneracy that the spectrum of this 441 amino acid long unstructured protein presents, we have introduced a graphical procedure based on residue type-specific product planes. Combining this strategy with the search for pairwise motifs, and combining the spectra of different Tau isoforms and even of peptides derived from the native sequence, we arrive at a partial assignment that is sufficient to map the interactions of Tau with its molecular partners. The obtained assignments equally confirm the absence of regular secondary structure in the isolated protein.     

Dependence of the phase separation process on the relative onset of network formation in simultaneous interpenetrating polymer networks

Morphology development during the synthesis at room temperature of an interpenetrating polyurethane/poly(methyl methacrylate) network was investigated by small-angle X-ray scattering in relation with their relative kinetics of formation, determined by Fourier transform infra red spectroscopy. When the time lag between the onset of the two reactions is short, macroscopic phase separation occurs as the polyurethane network is incompletely formed. However, when the time lag increases, the poly(methyl methacrylate) forms into a more continuous network which limits the growth of phase separation to a close environment.     

Multilevel surrogate modeling of an amine scrubbing process for CO2capture

Surrogate models provide a powerful method for simplifying calculations within complex simulations. While surrogate models are broadly applied within chemical engineering, little research exists investigating the level of surrogacy's impact on a simplified process model. In this work, artificial neural networks (ANN) and Kriging models are used as surrogate models at the process, process unit, and thermodynamic levels for a CO₂ amine scrubbing process. The surrogated models are evaluated against an Aspen Plus simulation for accuracy, convergence behavior, computational cost, and ability to extrapolate. The thermodynamic and process unit models can better handle discontinuous, non-smooth behavior, and convergence issues in the surrogated truth model, but poor conditioning in the final system of equations results in a lower accuracy and convergence rate than the process level surrogate. Beyond model accuracy, availability of diverse data, intended re-usability, and the desired outputs must be considered when selecting a level of abstraction.     

Digital screening methodology for the directed evolution of transglycosidases

Engineering of glycosidases with efficient transglycosidasesactivity is an alternative to glycosyltransferases or glycosynthasesfor the synthesis of oligosaccharides and glycoconjugates. However,the engineering of transglycosidases by directed evolution methodologiesis hampered by the lack of efficient screening systems for sugar-transferactivity. We report here the development of digital imaging-basedhigh-throughput screening methodology for the directed evolutionof glycosidases into transgalactosidases. Using this methodology,we detected transglycosidase mutants in intact Escherichia colicells by digital imaging monitoring of the activation of non-or low-hydrolytic mutants by an acceptor substrate. We screenedseveral libraries of mutants of β-glycosidase from Thermusthermophilus using this methodology and found variants withup to a 70-fold overall increase in the transglycosidase/hydrolysisactivity ratio. Using natural disaccharide acceptors, thesetransglycosidase mutants were able to synthesise trisaccharides,as a mixture of two regioisomers, with up to 76% yield.     

On the Characterisation of Silver Species for SCR of NO x with Ethanol

Reducing of nitrogen oxides (NO _x ) in a lean exhaust gases has become one of the most important environmental concerns. Among the different active phases studied for NO _x reduction reaction, silver-based catalysts supported over alumina show good performances using, as reducing agents, either hydrocarbons or oxygenated compounds. Nevertheless, a good understanding of the mechanism reaction has not been reached yet. This comprehension requires a better characterisation of the silver-based catalysts system. In our study, Ag/Al₂O₃ catalysts showed high efficiency in NO _x reduction using ethanol as reducing agent. The conversion plots, in steady state conditions for the different samples Ag/Al₂O₃ (0.8–3.5% Ag wt), show a great dependance of the activity with the metal loading. The optimal silver loading has been established around 2 wt.% Increasing the silver loading, the temperature of maximal NO _x conversion shifted toward the lower temperatures. According to the literature, a reduced and an oxide phase of silver have been observed by UV–Vis spectroscopy. The ratio between the two phases is changing with the silver loading. However, temperature programmed reduction (TPR) measurements reveal the presence of two types of oxide phases. TPR reveal the coexistence of a silver oxide phase (Ag₂O), according to a production of water in the course of the reaction, and a non-oxygenated phase attributed to isolated Ag⁺ cation. Thus, an original way using TPR measurements has been developed to differentiate the various oxidized phases. The aim of this characterisation is to correlate the catalyst’s activity with the observed silver phases, in order to understand the nature of phase active for NO _x reduction at low temperatures.     

Polyethylene nanocomposites based on intercalation of N-alkyl amines within KTiNbO5 structure

This article describes the synthesis of nanostructured organic/inorganic hybrid materials based on the modification of the titanoniobate oxide KTiNbO₅ by N-alkyl amines via an acido-basic reaction. X-ray diffraction and scanning electron microscopy have showed the successful intercalation of the organic molecules between the inorganic layers. The hybrid nanofillers previously obtained have been incorporated in a polyethylene matrix by melt intercalation. The morphology and thermomechanical properties of the nanocomposites have been investigated. It has been revealed that the modification of the oxide improves the dispersion and the exfoliation in the matrix leading to an increase of Young's modulus and of the degradation temperature. The TEM observations coupled with EDS mapping is revealed to be one interesting mean of characterization for this study.     

A new membrane bioreactor generation for wastewater treatment application: Strategy of membrane aeration management by sequencing aeration cycles

Polymem is developing in the past few years a new membrane bioreactor concept using external module membranes. The membranes are hollow fibers. They are housed in carters and work in outside/in filtration mode. Permanent air scouring is provided at the bottom of the module to control the accumulation of sludge on the membrane surface. In other words, the membrane carters look like bubble columns with hollow fiber membranes inside.The main advantages of this concept are the easy maintenance of the external modules; the total independence of the bioreactor from the membrane filtration part, which facilitates plant retrofitting and upgrading; the high membrane compacity (up to 500 m²/m3), and better efficiency of membrane air scouring thanks to a dedicated coarse bubbles aeration system inside the module vessel.The first part of this paper deals with the quantification of the specific aeration demand of the system. Aeration demand was compared to conventional MBR systems. The study shows that with this optimised geometry of module concept, the aeration flow rate is lowered compared with conventional processes.In the second part of this paper, an optimisation of the aeration demand was carried out by sequencing the cycle of aeration by incorporating a syncope in the aeration. Ratios of the time-on and time-off from 1/2 to 1/5 were tested for various instantaneous aeration flow rates. Impacts on both short term fouling and long term fouling were evaluated and quantified in terms of permeability decrease. The advantages of the location of the membrane in an external cylindrical carter have been demonstrated in terms of operating cost savings with a reduction of specific aeration demand for membranes scouring at 100 to 250 Nl/h m², which is half the classical consumption of the submerged MBR today.     

Performance Analysis and Modeling of Thermally Sprayed Resistive Heaters

Many processes and systems require hot surfaces. These are usually heated using electrical elements located in their vicinity. However, this solution is subject to intrinsic limitations associated with heating element geometry and physical location. Thermally spraying electrical elements directly on surfaces can overcome these limitations by tailoring the geometry of the heating element to the application. Moreover, the element heat transfer is maximized by minimizing the distance between the heater and the surface to be heated. This article is aimed at modeling and characterizing resistive heaters sprayed on metallic substrates. Heaters were fabricated by using a plasma-sprayed alumina dielectric insulator and a wire flame-sprayed iron-based alloy resistive element. Samples were energized and kept at a constant temperature of 425 °C for up to 4 months. SEM cross-sectional observations revealed the formation of cracks at very specific locations in the alumina layer after thermal use. Finite-element modeling shows that these cracks originate from high local thermal stresses and can be predicted according to the considered geometry. The simulation model was refined using experimental parameters obtained by several techniques such as emissivity and time-dependent temperature profile (infra-red camera), resistivity (four-probe technique), thermal diffusivity (laser flash method), and mechanical properties (micro and nanoindentation). The influence of the alumina thickness and the substrate material on crack formation was evaluated.     

Molecular Genetics of Conjunctival Melanoma and Prognostic Value of TERT Promoter Mutation Analysis

The aim of this study was exploration of the genetic background of conjunctival melanoma (CM) and correlation with recurrent and metastatic disease. Twenty-eight CM from the Rotterdam Ocular Melanoma Study group were collected and DNA was isolated from the formalin-fixed paraffin embedded tissue. Targeted next-generation sequencing was performed using a panel covering GNAQ, GNA11, EIF1AX, BAP1, BRAF, NRAS, c-KIT, PTEN, SF3B1, and TERT genes. Recurrences and metastasis were present in eight (29%) and nine (32%) CM cases, respectively. TERT promoter mutations were most common (54%), but BRAF (46%), NRAS (21%), BAP1 (18%), PTEN (14%), c-KIT (7%), and SF3B1 (4%) mutations were also observed. No mutations in GNAQ, GNA11, and EIF1AX were found. None of the mutations was significantly associated with recurrent disease. Presence of a TERT promoter mutation was associated with metastatic disease (p-value = 0.008). Based on our molecular findings, CM comprises a separate entity within melanoma, although there are overlapping molecular features with uveal melanoma, such as the presence of BAP1 and SF3B1 mutations. This warrants careful interpretation of molecular data, in the light of clinical findings. About three quarter of CM contain drug-targetable mutations, and TERT promoter mutations are correlated to metastatic disease in CM.