Determination of state-of-discharge of zinc-silver oxide button cells. II. Impedance measurements

The prediction of the state-of-discharge of numerous types of Zn-Ag₂O button cells from six international manufacturers has been investigated using the impedance technique over an extended frequency range. The frequency responses at various states-of-discharge are presented and it is shown that the changes in impedance which result from discharging provide several potential parameters for the state-ofdischarge prediction. The complex impedance plot of the undischarged cells usually shows a fairly welldefined semicircle at high frequencies and a straight line with a slope between 40 and 50° at low frequencies. As discharge proceeds, the diameter of the semicircle increases and the overlap between the semicircle and the low-frequency straight line increases. The most attractive method would be to determine a parameter such as a characteristic relaxation frequency in the complex impedance plot. Unfortunately, no unambiguous characteristic parameter can be extracted due to the non-ideal shape of the impedance response at high frequencies. The determination of the diameter of the high-frequency semicircle has been faced with the same difficulties. The most reliable test was found to be the determination of either the phase of the impedance, or a corrected phase ^– taken from the high-frequency intercept. The proposed prediction is a go/no go indication on the basis of one- or two-frequency measurements for or, ^– respectively. The selection is made at 20–40% state-of-discharge. The charge withdrawn is negligibly small and the time of the test is between 1 and 100 s depending on the type of cell. A calibration is necessary for each cell dimension and each manufacturer. Some 10–16% of the types of cells investigated could not be selected successfully, mainly because of too large a dispersion of the electrical characteristics of the cells, especially for small newly developed types, and of the similarity of the ( and values in the low and high state-of-discharge in the appropriate frequency range. The latter difficulty arises from the difference of the frequency response between the undischarged and the partly discharged cells occurring at high frequencies.This is the second of a series of papers dedicated to Professor Ernest Yeager on the ocasion of his 60th birthday.     

DIVA: Recognition of typical situations for turbine generator diagnosis

DIVA is an expert system for turbine generator diagnosis. Its aim is to help a plant operator interpret vibration evolution to diagnose developing faults. Interpretation of vibration evolution is primarily a recognition process which is achieved by a particular model of heuristic classification. DIVA tries to recognize the observed situation among a hierarchy of typical situations.The purpose of this paper is to present the model we used for heuristic classification, based on prototypes. Prototypes represent typical problem situations and may also be seen as experts with special knowledge of what to do in such situations. We argue that this model presents significant advantages to deal with complex problems such as vibration surveillance.     

Anodic stripping voltametric cell for determination of copper and lead in atmospheric dust

Studies of air pollution by metals contained in dust particules usually require mineralization of a dust-collecting filter. This treatment introduces impurities into the sample. To avoid such contamination, an anodic stripping cell was constructed requiring no preliminary treatment of the sample filter. The cell uses a three-electrode amperometric system in differential pulse anodic stripping mode (DPAS). Solubilization of the metals from dust by a complexing agent, instead of the strong acid normally encountered in other methods, allows selective determination of metals according to their chemical form. With this cell, minimal handling of the collection filter and a large area mercury-coated vitreous carbon electrode located close to the sample filter (2 mm) lead to limits of detection as low as 0.15 μg of lead and 10 ng of copper. Precision is 2% for lead determination and 4% for copper determination (RSD).     

Etude de la resistivité de corps pulvérulents à base de carbone en fonction de la compression

Electrical resistance measurements were performed on different varieties of carbon blacks (Sterling Fr, MT, S, Black Pearls 2) under compression up to 660 kgf/cm² to determine the real resistivity of the carbon material. The general shape of the curves log p= - s log P are in good agreement with those reported by Mrozowski. Two theories have been proposed to explain the mechanism of the current flow through the particles. Holm's Contacts and the Tunnel effect between particles. The results for thermal blacks seem to agree with the first interpretation while the behaviour of the Channel blacks rather follows the second.     

Towards a simple and safe Objective Caml compiling framework for the synchronous language SIGNAL

This paper presents a simple and safe compiler, called MinSIGNAL, from a subset of the synchronous dataflow language SIGNAL to C, as well as its existing enhancements. The compiler follows a modular architecture, and can be seen as a sequence of source-to-source transformations applied to an intermediate representation which is named Synchronous Clocked Guarded Actions (S-CGA) and translation to sequential imperative code. Objective Caml (OCaml) is used for the implementation of MinSIGNAL. As a modern functional language, OCaml is adapted to symbolic computation and so, particularly suitable for compiler design and implementation of formal analysis tools. In particular, the safety of its type checking allows to skip some verification that would be mandatory with other languages. Additionally, this work is a basis for the formal verification of the compilation of SIGNAL with a theorem prover such as Coq.     

Leukemia-Induced Cellular Senescence and Stemness Alterations in Mesenchymal Stem Cells Are Reversible upon Withdrawal of B-Cell Acute Lymphoblastic Leukemia Cells

Leukemic cell growth in the bone marrow (BM) induces a very stressful condition. Mesenchymal stem cells (MSC), a key component of this BM niche, are affected in several ways with unfavorable consequences on hematopoietic stem cells favoring leukemic cells. These alterations in MSC during B-cell acute lymphoblastic leukemia (B-ALL) have not been fully studied. In this work, we have compared the modifications that occur in an in vitro leukemic niche (LN) with those observed in MSC isolated from B-ALL patients. MSC in this LN niche showed features of a senescence process, i.e., altered morphology, increased senescence-associated β-Galactosidase (SA-βGAL) activity, and upregulation of p53 and p21 (without p16 expression), cell-cycle arrest, reduced clonogenicity, and some moderated changes in stemness properties. Importantly, almost all of these features were found in MSC isolated from B-ALL patients. These alterations rendered B-ALL cells susceptible to the chemotherapeutic agent dexamethasone. The senescent process seems to be transient since when leukemic cells are removed, normal MSC morphology is re-established, SA-βGAL expression is diminished, and MSC are capable of re-entering cell cycle. In addition, few cells showed low γH2AX phosphorylation that was reduced to basal levels upon cultivation. The reversibility of the senescent process in MSC must impinge important biological and clinical significance depending on cell interactions in the bone marrow at different stages of disease progression in B-ALL.     

Stack-and-Draw Applied to the Engineering of Multi-Material Fibers with Non-Cylindrical Profiles

Here, it is demonstrated that the stack-and-draw approach can be expanded to unusual materials association and profile geometries to generate fiber assemblies with unprecedented functionalities. This approach relies on the stacking of flat oxide glass slides into a preform, which is then thermally elongated into tens-of-meters-long ribbon fibers with preserved cross-section ratio. Fabrication methodology is introduced. In order to illustrate the versatility of the method, a panel of fibers with diverse geometries and functions is exposed, including glass-only exposed-core fibers for chemical sensing and, upon the insertion of metal electrodes, H-shaped multi-cavity structures and compact, glass-metal fiber optical detectors applied to a gas analysis by means of fiber-tip plasma spectroscopy. It is believed this new approach will offer an attractive, straightforward solution for designing innovative, complex multimaterial fiber platforms with enhanced functionalities.     

Screening of plant species for the phytotreatment of wastewater containing sulphonated anthraquinones

Sulphonated anthraquinones are known to be recalcitrant to biodegradation and are not eliminated by traditional wastewater treatment plants, leading to their accumulation in fresh water. Due to the high cost and limited efficiency of existing physical-chemical treatments, alternative cheaper processes are required to remove these compounds from industrial effluents. Four plant species were tested under hydroponic conditions for their ability to treat model effluents contaminated with mono- and disulphonated anthraquinones. Among them, Rheum rabarbarum (rhubarb) showed the most promising results and was chosen for further investigation. The apparent transpiration stream concentration factor obtained with this plant species reached up to 2.5, indicating a strong phytotreatment potential that should be further explored then exploited.     

Detection of single photoluminescent diamond nanoparticles in cells and study of the internalization pathway

Diamond nanoparticles are promising photoluminescent probes for tracking intracellular processes, due to embedded, perfectly photostable color centers. In this work, the spontaneous internalization of such nanoparticles (diameter 25 nm) in HeLa cancer cells is investigated by confocal microscopy and time-resolved techniques. Nanoparticles are observed inside the cell cytoplasm at the single-particle and single-color-center level, assessed by time-correlation intensity measurements. Improvement of the nanoparticle signal-to-noise ratio inside the cell is achieved using a pulsed-excitation laser and time-resolved detection taking advantage of the long radiative lifetime of the color-center excited state as compared to cell autofluorescence. The internalization pathways are also investigated, with endosomal marking and colocalization analyses. The low colocalization ratio observed proves that nanodiamonds are not trapped in endosomes, a promising result in prospect of drug delivery by these nanoparticles. Low cytotoxicity of these nanoparticles in this cell line is also shown.