Experimental and numerical investigation of a phase change material: Thermal-energy storage and release

The application of phase change materials (PCMs) for solar thermal-energy storage capacities has received considerable attention in recent years due to their large storage capacity and isothermal nature of the storage process. This study deals with the comparison of numerical and experimental results for a PCM conditioned in a parallelepipedic polyefin envelope to be used in passive solar walls. The experimental results were obtained by use of a genuine set-up involving heat flux sensors and thermocouples mounted on two vertical aluminium exchanger plates squeezing the samples. Numerical predictions were obtained with a custom one-dimensional Fortran code and a two-dimensional use of Fluent. Both methods showed a very good agreement with experimental observations for the melting process (?5%). However during solidification, both numerical codes failed to predict the phase change process accurately, the maximal relative error was as high as 57% (with an average of 8%).     

Enzymatic competition: Modeling and verification with timed hybrid petri nets

The formalism of hybrid functional petri nets (HFPN) has proved its convenience for simulating biological systems. The drawback of the noticeable expressiveness of HFPN is the difficulty to perform formal verifications of dynamical properties. In this article, we propose a model-checking procedure for timed hybrid petri nets (THPN), a sub-class of HFPN. This procedure is based on the translation of the THPN model and of the studied property into real-time automata. It is applied to model enzymatic competitions existing in amphibian metamorphosis.     

Modelling of solid formation by heterogeneous reactions through a multicomponent transport model of diluted ionic species: Simulation of barite fouling in a geothermal heat exchanger

A general model is proposed in order to describe the growth of a deposit by heterogeneous reactions. The hydrodynamics in the fluid is described by a multicomponent transport model for ionic species diluted in a solvent and heat transfer is taken into account in both liquid and solid domains. The boundary condition at the interface where the reaction takes place is described thoroughly. It involves the reaction kinetics and gives access to the velocity of the interface, ie, the mass rate of the solid deposit. The model is then applied to the case of barite crystallization in a heat exchanger. The liquid phase is therefore composed of two ionic species Ba²⁺ and SO₄²⁻ diluted in water. The solid phase is modelled as a homogeneous barite deposit. The fully dynamic CFD simulation of the model is made using Comsol Multiphysics, in a cylindrical pipe. The solid growth is analyzed over time and space in terms of the relevant variables of the model.     

The effect of sociodemographic diversity of residential customers on the financial risk experienced in the retail electricity market

The sociodemographic diversity of residential customers can affect the level of financial risk that an electricity provider experiences in the retail market. To demonstrate the relationship between sociodemographic diversity and financial risk, electricity consumption data drawn from the United Kingdom Power Networks ‘Low Carbon London’ project was analyzed to explore the relationship between sociodemographic diversity and financial risk experienced by electricity retailers. The results show that when increasing the sociodemographic diversity amongst a group of residential customers the effect on financial risk depends on the electricity consumption patterns of individual customers and the relationship of consumption patterns between residential customers. Increasing sociodemographic diversity amongst residential customers with very distinct energy consumption patterns can decrease the overall financial risk associated with the aggregated revenue received from these customers. However, the results showed that adding customers to a customer base without consideration for their sociodemographic background can cause the overall financial risk associated with the aggregated revenue received to change erratically. Whilst previous studies have considered customer diversity and its influence on peak electricity demand, this research advances the state-of-the-art by showing the importance of customer diversity to the financial quantity risk experienced by electricity retailers. This finding has serious implications for electricity providers seeking to mitigate financial risk in the retail electricity market.     

Power quality improvement using DPC controlled three-phase shunt active filter

This paper presents a new control method entitled direct power control (DPC) for shunt active power filter (APF), which is applied to eliminate line current harmonics and compensate reactive power. Its main goal is to rebuild active and reactive source powers to be compared to references values using hysteresis control. The active power reference is issue of DC-side of inverter and reactive power reference is set to zero for unity power factor. The outputs of hysteresis controllers associated with a switching table, control the instantaneous active and reactive power by selecting the optimum switching state of the voltage source inverter (VSI). A theoretical analysis with a complete simulation of the system and experimental results are presented to prove the excellent performance of the proposed technique.     

Biocompatibility of heparin-grafted hemodialysis membranes: impact on monocyte chemoattractant protein-1 circulating level and oxidative status

This prospective observational study aimed at evaluating efficacy and biocompatibility performances of the new heparin-coated Evodial dialyzers with/without systemic heparin reduction. After a 4-week wash-out period with reference polysulfone F70S dialyzers, 6 hemodialysis patients were sequentially dialyzed with Evodial, F70S, and Evodial dialyzers using 30% heparin reduction, each period of treatment was 4 weeks. Removal rates (RR) (urea, creatinine, and β2-microglobulin), dialysis dose, and instantaneous clearances (urea and creatinine) were measured as well as inflammatory (C-reactive protein, fibrinogen, interleukin 6, tumor necrosis factor α, and monocyte chemoattractant protein-1) and oxidative stress (OS) (superoxide anion, homocysteine, and isoprostanes) parameters at the end of each study period. Patients treated with Evodial or F70S dialyzers for 4 weeks presented comparable dialysis efficacy parameters including urea and creatinine RR, dialysis dose and instantaneous clearances. By contrast, a significantly lower but reasonably good β2-microglobulin RR was achieved with Evodial dialyzers. Regarding biocompatibility, no significant difference was observed with inflammation and OS except for postdialysis monocyte chemoattractant protein-1 which significantly decreased with Evodial dialyzers. Thirty percent heparinization reduction with Evodial dialyzers did not induce any change in inflammation but led to an improvement in OS as demonstrated by a decrease in postdialysis superoxide production and predialysis homocysteine and isoprostane. This bioactive dialyzer together with heparin dose reduction represents a good trade-off between efficacy and biocompatibility performance (improvement in OS with a weak decrease in efficacy) and its use is encouraging for hemodialysis patients not only in reducing OS but also in improving patient comorbid conditions due to lesser heparin side effects.     

High Magnetic Field Annealing Dependent the Morphology and Microstructure of Nanocrystalline Co/Ni Bilayered Films

Co/Ni bilayered films were prepared on ITO glass by electrodeposition assisted with a magnetic field up to 0.5T aligned parallel to the electrode surface. The effect of a high magnetic field annealing up to 12T on morphology and microstructure of the post-deposited films was investigated by field emission scanning electronic microscopy (FE-SEM), X-ray diffraction (XRD) and atomic force microscopy (AFM). Grain shape and grain boundary in the Co/Ni morphology were modified dramatically when the high magnetic field was applied during the annealing process. Magnetic anisotropy appeared in the films due to the preferential orientation of fcc-CoNi alloy in comparison with a weaker orientation of hcp-Co. High magnetic field annealing favored to form a more homogeneous surface with smaller grain size and lower roughness, compared with the annealed samples obtained in the absence of magnetic field. The influencing mechanisms of high magnetic field annealing on the microstructure evolution in the Co/Ni electrodeposits are interpreted in terms of the overlapping effects: diffusion, recrystallization, grain growth and magnetic domains.     

Towards a verified compiler prototype for the synchronous language SIGNAL

SIGNAL belongs to the synchronous languages family which are widely used in the design of safety-critical real-time systems such as avionics, space systems, and nuclear power plants. This paper reports a compiler prototype for SIGNAL. Compared with the existing SIGNAL compiler, we propose a new intermediate representation (named S-CGA, a variant of clocked guarded actions), to integrate more synchronous programs into our compiler prototype in the future. The front-end of the compiler, i.e., the translation from SIGNAL to S-CGA, is presented. As well, the proof of semantics preservation is mechanized in the theorem prover Coq. Moreover, we present the back-end of the compiler, including sequential code generation and multithreaded code generation with time-predictable properties. With the rising importance of multi-core processors in safetycritical embedded systems or cyber-physical systems (CPS), there is a growing need for model-driven generation of multithreaded code and thus mapping on multi-core. We propose a time-predictable multi-core architecture model in architecture analysis and design language (AADL), and map the multi-threaded code to this model.     

Dynamic modeling of compressed gas energy storage to complement renewable wind power intermittency

To evaluate the impacts and capabilities of large-scale compressed gas energy storage for mitigating wind intermittency, dynamic system models for compressed air energy storage and compressed hydrogen energy storage inside salt caverns have been developed. With the experimental data from air storage in a salt cavern in Huntorf, Germany, the cavern model has been verified. Both daily and seasonal simulation results suggest that with the same size wind farm and salt cavern, a compressed hydrogen energy storage system could better complement the wind intermittency and could also achieve load shifting on a daily and seasonal time scale. Moreover, the hydrogen produced in the compressed hydrogen energy storage system could also be dispatched as a fuel to accommodate zero emission transportation for up to 14,000 fuel cell vehicles per day while achieving seasonal load shifting.