Possible Role of Circulating Bone Marrow Mesenchymal Progenitors in Modulating Inflammation and Promoting Wound Repair

Circulating bone marrow mesenchymal progenitors (BMMPs) are known to be potent antigen-presenting cells that migrate to damaged tissue to secrete cytokines and growth factors. An altered or dysregulated inflammatory cascade leads to a poor healing outcome. A skin model developed in our previous study was used to observe the immuno-modulatory properties of circulating BMMP cells in inflammatory chronic wounds in a scenario of low skin perfusion. BMMPs were analysed exclusively and in conjunction with recombinant tumour necrosis factor alpha (TNFα) and recombinant hepatocyte growth factor (HGF) supplementation. We analysed the expression levels of interleukin-8 (IL-8) and ecto-5′-nucleotidase (CD73), together with protein levels for IL-8, stem cell factor (SCF), and fibroblast growth factor 1 (FGF-1). The successfully isolated BMMPs were positive for both hemopoietic and mesenchymal markers and showed the ability to differentiate into adipocytes, chondrocytes, and osteocytes. Significant differences were found in IL-8 and CD73 expressions and IL-8 and SCF concentrations, for all conditions studied over the three time points taken into consideration. Our data suggests that BMMPs may modulate the inflammatory response by regulating IL-8 and CD73 and influencing IL-8 and SCF protein secretions. In conclusion, we suggest that BMMPs play a role in wound repair and that their induced application might be suitable for scenarios with a low skin perfusion.     

Role of Tyrosine Kinase Syk in Thrombus Stabilisation at High Shear

Understanding the pathways involved in the formation and stability of the core and shell regions of a platelet-rich arterial thrombus may result in new ways to treat arterial thrombosis. The distinguishing feature between these two regions is the absence of fibrin in the shell which indicates that in vitro flow-based assays over thrombogenic surfaces, in the absence of coagulation, can be used to resemble this region. In this study, we have investigated the contribution of Syk tyrosine kinase in the stability of platelet aggregates (or thrombi) formed on collagen or atherosclerotic plaque homogenate at arterial shear (1000 s⁻¹). We show that post-perfusion of the Syk inhibitor PRT-060318 over preformed thrombi on both surfaces enhances thrombus breakdown and platelet detachment. The resulting loss of thrombus stability led to a reduction in thrombus contractile score which could be detected as early as 3 min after perfusion of the Syk inhibitor. A similar loss of thrombus stability was observed with ticagrelor and indomethacin, inhibitors of platelet adenosine diphosphate (ADP) receptor and thromboxane A₂ (TxA₂), respectively, and in the presence of the Src inhibitor, dasatinib. In contrast, the Btk inhibitor, ibrutinib, causes only a minor decrease in thrombus contractile score. Weak thrombus breakdown is also seen with the blocking GPVI nanobody, Nb21, which indicates, at best, a minor contribution of collagen to the stability of the platelet aggregate. These results show that Syk regulates thrombus stability in the absence of fibrin in human platelets under flow and provide evidence that this involves pathways additional to activation of GPVI by collagen.     

MEMS陀螺仪在恶劣高温环境下提供准确的惯性检测

越来越多的应用需要从处于高温环境中的传感器收集数据.相比同等的分立式传感器,MEMS通常更小巧,功耗和成本都更低.此外,它们还可以在同样大小的半导体封装内集成信号调理电路.除了可以提供高精度倾斜(倾角)测量,还需要更加灵活和自由,以准确测量系统在严苛环境应用下的移动,在这些环境下,最终产品可能遭受冲击、振动和剧烈移动....     

Circulating hormones and estrous stage predict cellular and stromal remodeling in murine uterus

The understanding of how estrogen and progesterone (P(4)) drive uterine remodeling in rodents has largely been based on studies involving administration of exogenous hormones, using steroid receptor-deficient mice, or relying on vaginal smears. In all these cases, the actual serum levels of 17beta-estradiol (E(2)) and P(4) are not directly measured, and the relationship between physiological levels of female sex hormones and uterine remodeling in cycling mice has not been fully explored. Here, we measured the circulating levels of E(2) and P(4) in cycling mice and performed correlation analysis between hormone levels and epithelial and stromal uterine parameters, irrespective of the estrous stage. In parallel, these parameters were analyzed in relation to the more conventional method of vaginal smear classification of estrous stage. We found that circulating P(4) inversely correlated with uterine width, luminal epithelial proliferation, stromal apoptosis, and degradation of luminal epithelial basement membrane collagen type-IV. Circulating E(2) positively correlated with uterine width, stromal cell proliferation, and collagen type-I content, while it negatively correlated with glandular epithelial proliferation, loss of collagen type-IV surrounding glandular epithelium, and apoptosis in luminal, glandular, and stromal compartments. Our findings indicate that measuring P(4) or E(2) levels can predict many concurrent cellular and stromal events in the mouse uterus, suggesting that in naturally cycling mice cellular responses to hormone changes are not delayed, but occur very rapidly.     

Fast reactions with nano- and micrometer aluminum: A study on oxidation versus fluorination

The use of fluorine as an oxidizing agent in aluminum (Al)-based thermite reactions yields higher peak pressures and an increase in gas production compared with oxygen-containing oxidizers, such as molybdenum trioxide (MoO₃). Thus fluorination reactions have the potential to excel in situations that require high pressures and flame speeds. This study compares the combustion behaviors of Al/Teflon, Al/MoO₃/Teflon, and Al/MoO₃ in an effort to determine the effects that the replacement of oxygen with fluorine has on the reaction dynamics in both open and confined burning configurations. Data were collected from pressure sensors and high-speed imaging. The mass percent of Al was varied from 10 to 90% to study the effects of composition. The composites were then further tested at the optimum stoichiometry using either 50 nm or 1-3 μm Al to examine the effect of Al particle size. The addition of Teflon in an open configuration hinders the reaction due to a loss of liberated gas. Confining the reaction enables the trapped gases to enhance convection, yielding increased flame speeds. For confined conditions, the reactions containing Teflon exhibit higher peak pressures but lower flame speeds than the reactions with MoO₃. These results imply that a direct relationship between generated gas pressures and flame speeds does not generally exist when comparing different oxidizers. The theoretically predicted relationship for the relative flame speed versus relative particle size based on the melt-dispersion mechanism agrees with experimental data for all Al particle sizes and for the fluorination reaction. Particle synthesis parameters are suggested that could be controlled to enable micrometer-scale Al particles to achieve the performance of nanoscale Al particles. This is of significant practical importance, because nanoparticles are 30 to 50 times more expensive than the micrometer particles.     

Organic solvent pretreatment to enhance enzymic saccharification of straw

Enzymic saccharification of wheat straw in the absence of any pretreatment was only about 20 %. Acid hydrolysis did not improve the overall cellulose enzymic breakdown, nor did pretreatment by flash autohydrolysis under pressure or sodium chlorite delignification. When wheat straw was treated with N-methyl-morpholine-N-oxide (MMNO) at J20°C for 20–30 min, this treatment and subsequent enzymic hydrolysis produced carbohydrate conversion of 73%. Similar results could be obtained by treating straw with 0·1 M sodium hydroxide. When MMNO treatment was combined with any other pretreatment, the saccharification yield was greatly enhanced. Nearly quantitative conversion was obtained by swelling straw in 0·1 M sodium hydroxide followed by MMNO treatment. The results show that lignin content of plant material does not represent the limiting factor to enzymic saccharification.     

Effects of Milling Liquid on the Reaction-Bonded Aluminum Oxide Process

The reaction-bonded aluminum oxide process begins with aluminum, Al₂O₃, and usually ZrO₂ powders that have been attrition-milled in an organic liquid. The attrition-milled powder is then compacted and heat-treated in air to produce polycrystalline, Al₂O₃-based ceramics. Safety considerations have made it desirable for the milling liquid to be changed from acetone to a less-flammable solvent. In this paper, mineral spirits, ethanol, and mineral spirits that contains 2 wt% stearic acid are presented as viable alternatives to acetone. The effects of changing the milling liquid on the reaction process and the properties of the final fired ceramic are investigated.     

Wind speed variability across the UK between 1957 and 2011

By using surface data from 57 UK meteorological stations, a national [British Atmospheric Data Centre (BADC)‐57] and regional wind index for the UK has been calculated for the period 1983–2011. For a subset of seven stations, an additional national index (BADC‐7) has been calculated for the period 1957–2011. The indices show an annual variability of 4% over their respective periods, corresponding to a variation in typical wind turbine capacity factor of 7%. These indices are compared with indices calculated from other sources, namely an index generated using a gridded dataset of observed values interpolated across the UK, an index calculated from an area bounding the UK using the ERA‐40 re‐analysis dataset, indices calculated from bilinear interpolation of the ERA‐40 re‐analysis dataset to the 57 and 7 stations and another independent UK wind index. The indices show variation in trends, with all showing some level of decline with the exception of that generated using the ERA‐40 re‐analysis dataset averaged over the UK, which shows a significant increase. The various indices show varying degrees of agreement with correlation coefficients, after trends are removed, ranging between 0.611 and 0.979. The effect of changes in site exposure, instrument bias and measuring height was considered for the BADC‐7 and BADC‐57 indices. The change in instrument measurement height appears to have a significant biasing effect, and it is likely that this along with changes in exposure at urban sites has caused the decline in annual wind speeds observed for some of the indices. There does not appear to be evidence for significant changes in large‐area (mesoscale) surface roughness. The correlation between annual mean wind speeds at the seven surface station sites used to calculate the BADC‐7 index is seen to be quite weak, indicating very localized variations in inter‐annual variability. When regional differences in the index are investigated, it is seen that wind speeds show a very slight decline across the UK in all regions except the south‐east, which shows a slight increase. The greatest decrease is seen in the north‐west. These changes are in the same direction as the tentative predictions given by climate models for future changes in wind speed across the UK, although the uncertainty is large given the large degree of inter‐annual variation. Copyright © 2013 John Wiley & Sons, Ltd.     

Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts

We report a novel and very handful strategy for the functionalization of diamond nanoparticles (NDs), based on the ultrasound-assisted grafting of aryl groups from the electroless reduction of diazonium salts. For this study, 4-nitrobenzenediazonium salt was used as a model molecule and the reaction was investigated in neutral and acidic aqueous media. Spectroscopic evidence for the successful attachment of aryl groups to nanodiamonds (NDs) was given by IR and XPS which clearly detect characteristic NO₂ peaks. Moreover, the absence of any peaks from the ⁺N≡N group in the IR spectra is a clear indication of the chemical reduction of the parent diazonium salt at the surface of NDs. This spontaneous chemical modification of NDs by aryl diazonium salts was confined to the surface of the ND particles; indeed, XRD measurements have shown that the crystalline structure of the bulk of the particles was unaffected. It opens up new possibilities towards the control of the surface chemical composition of NDs using simple protocols operated in very soft conditions, i.e. in water at room temperature. It shows conclusively that the chemistry toolbox of experts interested in nanodiamonds should contain aryl diazonium salts, given their versatility in forming active platforms.     

Chemically-speciated on-road PM2.5 motor vehicle emission factors in Hong Kong

PM_2.5 (particle with an aerodynamic diameter less than 2.5 µm) was measured in different microenvironments of Hong Kong (including one urban tunnel, one Hong Kong/Mainland boundary roadside site, two urban roadside sites, and one urban ambient site) in 2003. The concentrations of organic carbon (OC), elemental carbon (EC), water-soluble ions, and up to 40 elements (Na to U) were determined. The average PM_2.5 mass concentrations were 229 ± 90, 129 ± 95, 69 ± 12, 49 ± 18 µg m^− 3 in the urban tunnel, cross boundary roadside, urban roadside, and urban ambient environments, respectively. Carbonaceous particles (sum of organic material [OM] and EC) were the dominant constituents, on average, accounting for ∼ 82% of PM_2.5 emissions in the tunnel, ∼ 70% at the three roadside sites, and ∼ 48% at the ambient site, respectively. The OC/EC ratios were 0.6 ± 0.2 and 0.8 ± 0.1 at the tunnel and roadside sites, respectively, suggesting carbonaceous aerosols were mainly from vehicle exhausts. Higher OC/EC ratio (1.9 ± 0.7) occurred at the ambient site, indicating contributions from secondary organic aerosols. The PM_2.5 emission factor for on-road diesel-fueled vehicles in the urban area of Hong Kong was 257 ± 31 mg veh^− 1 km^− 1, with a composition of ∼ 51% EC, ∼ 26% OC, and ∼ 9% SO₄⁼. The other inorganic ions and elements made up ∼ 11% of the total PM_2.5 emissions. OC composed the largest fraction (∼ 51%) in gasoline and liquid petroleum gas (LPG) emissions, followed by EC (∼ 19%). Diesel engines showed higher emission rates than did gasoline and LPG engines for most pollutants, except for V, Br, Sb, and Ba.