Water Penetration—Its Effect on the Strength and Toughness of Silica Glass

When a crack forms in silica glass, the surrounding environment flows into the crack opening, and water from the environment reacts with the glass to promote crack growth. A chemical reaction between water and the strained crack-tip bonds is commonly regarded as the cause of subcritical crack growth in glass. In silica glass, water can also have a secondary effect on crack growth. By penetrating into the glass, water generates a zone of swelling and, hence, creates a compression zone around the crack tip and on the newly formed fracture surfaces. This zone of compression acts as a fracture mechanics shield to the stresses at the crack tip, modifying both the strength and subcritical crack growth resistance of the glass. Water penetration is especially apparent in silica glass because of its low density and the fact that it contains no modifier ions. Using diffusion data from the literature, we show that the diffusion of water into silica glass can explain several significant experimental observations that have been reported on silica glass, including (1) the strengthening of silica glass by soaking the glass in water at elevated temperatures, (2) the observation of permanent crack face displacements near the crack tip of a silica specimen that had been soaked in water under load, and (3) the observation of high concentrations of water close to the fracture surfaces that had been formed in water. These effects are consistent with a model suggesting that crack growth in silica glass is modified by a physical swelling of the glass around the crack tip. An implication of water-induced swelling during fracture is that silica glass is more resistant to crack growth than it would be if swelling did not occur.     

POLYBiNN: Binary Inference Engine for Neural Networks using Decision Trees

Journal of Signal Processing Systems - Convolutional Neural Networks (CNNs) and Deep Neural Networks (DNNs) have gained significant popularity in several classification and regression applications....     

Transient and steady states of Gd2Zr2O7 and 2ZrO2∙Y2O3 (ss) interactions with calcium magnesium aluminium silicates

Reactions between calcium magnesium aluminium silicates (CMAS) and Gd₂Zr₂O₇ or 2ZrO₂?Y₂O₃ (ss) are investigated within a temperature range of 1200–1300 °C and for durations of 1 h–100 h. The evolution of CMAS penetration depth in Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃ (ss) pellets varies considerably depending on the interaction time. A quantitative analysis of the nature and composition of phases observed in stationary conditions (powder/powder interaction) is performed by SEM-FEG coupled with WDS analyses using micro-agglomerated nanoparticles of Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃. Faster kinetics of the gadolinium-based system are illustrated through an analysis of the morphology of the reaction area and of the resulting CMAS tightness of reaction products. The compositions and quantities of reaction products observed at equilibrium are very similar for the two systems, but transient states are significantly different.     

Anaerobic methane oxidation and aerobic methane production in an east African great lake (Lake Kivu)

We investigated CH₄ oxidation in the water column of Lake Kivu, a deep meromictic tropical lake with CH₄-rich anoxic deep waters. Depth profiles of dissolved gases (CH₄ and N₂O) and a diversity of potential electron acceptors for anaerobic CH₄ oxidation (NO₃^?, SO₄^2?, Fe and Mn oxides) were determined during six field campaigns between June 2011 and August 2014. Denitrification measurements based on stable isotope labelling experiments were performed twice. In addition, we quantified aerobic and anaerobic CH₄ oxidation, NO₃^? and SO₄^2? consumption rates, with and without the presence of an inhibitor of SO₄^2?-reducing bacteria activity. Aerobic CH₄ production was also measured in parallel incubations with the addition of an inhibitor of aerobic CH₄ oxidation. The maximum aerobic and anaerobic CH₄ oxidation rates were estimated to be 27?±?2 and 16?±?8?μmol/L/d, respectively. We observed a difference in the relative importance of aerobic and anaerobic CH₄ oxidation during the rainy and the dry season, with a greater role for aerobic oxidation during the dry season. Lower anaerobic CH₄ oxidation rates were measured in presence of molybdate in half of the measurements, suggesting the occurrence of linkage between SO₄^2? reduction and anaerobic CH₄ oxidation. NO₃^? consumption and dissolved Mn production rates were never high enough to sustain the measured anaerobic CH₄ oxidation, reinforcing the idea of a coupling between SO₄^2? reduction and CH₄ oxidation in the anoxic waters of Lake Kivu. Finally, significant rates (up to 0.37?μmol/L/d) of pelagic CH₄ production were also measured in oxygenated waters.     

Comparison of an effect-model-law-based method versus traditional clinical practice guidelines for optimal treatment decision-making: application to statin treatment in the French population

Healthcare authorities make difficult decisions about how to spend limited budgets for interventions that guarantee the best cost-efficacy ratio. We propose a novel approach for treatment decision-making, OMES—in French: Objectif thérapeutique Modèle Effet Seuil (in English: Therapeutic Objective–Threshold–Effect Model; TOTEM). This approach takes into consideration results from clinical trials, adjusted for the patients'' characteristics in treatment decision-making. We compared OMES with the French clinical practice guidelines (CPGs) for the management of dyslipidemia with statin in a computer-generated realistic virtual population, representing the adult French population, in terms of the number of all-cause deaths avoided (number of avoided events: NAEs) under treatment and the individual absolute benefit. The total budget was fixed at the annual amount reimbursed by the French social security for statins. With the CPGs, the NAEs was 292 for an annual cost of 122.54 M€ compared with 443 with OMES. For a fixed NAEs, OMES reduced costs by 50% (60.53 M€ yr⁻¹). The results demonstrate that OMES is at least as good as, and even better than, the standard CPGs when applied to the same population. Hence the OMES approach is a practical, useful alternative which will help to overcome the limitations of treatment decision-making based uniquely on CPGs.     

CFD and experimental investigation of the gas–liquid flow in the distributor of a compact heat exchanger

High performance of compact heat exchangers is conditioned by correct fluid distribution. This is especially true for gas–liquid heat exchangers where a uniform distribution is particularly delicate to obtain and where maldistribution entails significant performance deterioration. Several phenomena can lead to phase distribution problems: the fins may be subject to manufacturing defects or fouling, leading to shortcuts or dead zones. But the first source of maldistribution may be a poor distribution at the outlet of the entrance distributor. This distributor aims at mixing the phases and distributing them across the channels.     

Influence of flour blend composition on fermentation kinetics and phytate hydrolysis of sourdough used to make injera

The influence of cereal blends, teff–white sorghum (TwS), barley–wheat (BW) and wheat–red sorghum (WrS), on fermentation kinetics during traditional fermentation of dough to prepare injera, an Ethiopian traditional fermented pancake, was investigated in samples collected in households. Barley malt was used with BW and WrS flours. WrS- and BW-injera sourdough fermentations were characterised by a transient accumulation of glucose and maltose and a two-step fermentation process: lactic acid fermentation and alcoholic fermentation with ethanol as the main end product. Only transient accumulation of glucose was observed in TwS-injera, and equimolar concentrations of lactic acid and ethanol were produced simultaneously. Final α-galactoside concentrations were low in all sourdoughs. Phytic acid (IP6) was completely hydrolyzed in WrS and BW-injeras probably due to the combined action of endogenous malt and microbial phytases. Only 28% IP6 hydrolysis was observed in TwS injera. Ways to improve IP6 hydrolysis in TwS-injera need to be investigated.     

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites

Selective Laser Melting (SLM) was used to process a powder mixture of CP Ti, 6.5 wt% Mo and 3.5 wt% Mo₂C. The process parameters were optimized to obtain full-density, crack free parts. After the in situ decomposition of Mo₂C in favor of the formation of TiC, the material consisted of a homogeneous dispersion of submicrometer sized TiC platelets in a β-(Ti,Mo) matrix exhibiting a high hardness up to 550 HV and compressive yield stress of 1164 ± 37 MPa. The microstructure and mechanical properties could be tailored by variation of the process parameters within the high-density processing window, as well as through post-process heat treatments.     

Tribological behavior of composites fabricated by reactive SPS sintering in Ti-Si-C system

In this study, wear and friction behavior of two based-composites from the Ti-Si-C system, (40 wt% TiC; 28 wt% Ti₅Si₃; 17 wt% Ti₃SiC₂) and (18 wt% TiC; 26 wt% Ti₅Si₃; 41 wt% Ti₃SiC₂) reinforced by 15 wt% of large size SiC (100-150 µm) particles were investigated. The four-phase composites exhibited approximatively the same friction coefficient (µ ~ 0.9) under high loads (10 N and 7 N). The composite with high Ti₃SiC₂ showed higher wear rate values by one order of magnitude. However, under 1 N, the composite with high TiC content showed a higher running-in period and a lower steady state µ value (0.37 after 1000 m sliding distance). Scanning electron microscopy, Energy Dispersive X-Ray and Raman spectroscopy analysis of the worn surfaces of the two composites revealed that oxidation was the dominant wear mechanism. The oxidation process and the removal kinetics of the oxides during sliding controlled the tribological behavior of the composites. The influence of processing variables on microstructures development and wear mechanisms of the composites is discussed.     

Formation of the Perovskite Phase in the PbMg1/3Nb2/3O3─PbTiO3 System

The reaction sequences during calcination of oxide mixtures were studied for the PbMg_1/3Nb_2/3O₃─PbTiO₃ (PMN-PT) system. The effect of reactivity and composition of the starting mixtures was investigated. In the present study, a B-site-deficient, cubic pyrochlore phase in the PbO-Nb₂O₅ system was formed at 500°C. The perovskite phase of PMN was formed at 7007deg;C through the diffusion of MgO into the pyrochlore phase. The lattice parameter of the pyrochlore phase decreased as this transformation to perovskite progressed.