P-type double gate junctionless tunnel field effect transistor

We have investigated the 20 nm p-type double gate junctionless tunnel field effect transistor （P-DGJLTFET） and the impact of variation of different device parameters on the performance parameters of the P-DGJLTFET is discussed. We achieved excellent results of different performance parameters by taking the optimized device parameters of the P-DGJLTFET. Together with a high-k dielectric material （TiO2） of 20 nm gate length, the simulation results of the P-DGJLTFET show excellent characteristics with a high IoN of ～ 0.3 mA/μm, a low/OFF of ～ 30 fA/μm, a high ION/IOFF ratio of ～ 1×10^10, a subthreshold slope （SS） point of ～ 23 mV/decade, and an average SS of ～ 49 mV/decade at a supply voltage of -1 V and at room temperature, which indicates that PDGJLTFET is a promising candidate for sub-22 nm technology nodes in the implementation of integrated circuits.     

FORCED CONVECTIVE MASS TRANSFER IN ANNULI

Mass transfer in annuli has been critically examined for various flow situations. The overall mass transfer rate depends on the hydrodynamic regions prevailing in the annular channel as well as on its dimensions. Theoretically consistent correlations are proposed and recommended for both developed and developing boundary layers under laminar and turbulent flow conditions.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Cefuroxime-impregnated calcium phosphates as an implantable delivery system in experimental osteomyelitis

The study aimed to investigate the effectiveness of porous calcium phosphates viz., hydroxyapatite (HAp) and a bi-phasic calcium phosphate (BCP) with predominately β-tricalcium phosphate (β-TCP) prepared by aqueous solution combustion method impregnated with cefuroxime axetil for the treatment of experimental osteomyelitis and compared with parenteral treatment. In vitro release of the drug was tested for its sustained elution characteristics for 21 days in PBS (pH 7.2) and measured by HPLC. In the in vivo study, bone infection was induced in tibia of rabbits by inoculation of 1 ml (3 × 10⁶) CFU Staphylococcus aureus. On the 21st day, after the development of osteomyelitis, six animals were treated by filling the cavity with cefuroxime-impregnated HAp blocks (Group II), six animals with the same drug-impregnated β-TCP (Group III) and in six others, only cefuroxime (15 mg/kg twice daily) was injected parenterally 6 weeks (Group IV). Group I with six animals was kept untreated. Histologically, the signs of infection were found to subside by 3 and 6 weeks. Radiological evaluation with cefuroxime-impregnated HAp and β-TCP pointed out the disappearance of sequestrum and existence of newly formed bony specules. Concentration of cefuroxime in bone and serum as estimated by HPLC showed highest value on day 21 itself which reduced marginally by day 42 in both the groups and these values were higher than minimum inhibitory concentration (MIC) against S. aureus. Our findings suggest that bi-phasic calcium phosphates with predominately β-TCP content is a very efficient carrier material for antibiotic compounds even for refractory infections by S. aureus.     

Direct Amide Synthesis from Alcohols and Amines by Phosphine‐Free Ruthenium Catalyst Systems

Amides are synthesized directly from alcohols and amines in high yields using an in situ generated catalyst from easily available ruthenium complexes such as the (p‐cymene)ruthenium dichloride dimer, [Ru(p‐cymeme)Cl₂]₂, or the (benzene)ruthenium dichloride dimer, [Ru(benzene)Cl₂]₂, an N‐heterocyclic carbene (NHC) ligand, and a nitrogen containing L‐type ligand such as acetonitrile. The phosphine‐free catalyst systems showed improved or comparable activity compared to previous phosphine‐based catalytic systems. The in situ generated catalyst from [Ru(benzene)Cl₂]₂, an NHC ligand, and acetonitrile showed excellent activity toward reactions with cyclic secondary amines such as piperidine and morpholine.     

Effect of Alumina Reactivity on the Densification and Properties of Al2O3–Cr2O3 Refractories

Alumina‐chrome (Al₂O₃–Cr₂O₃) refractories with Al₂O₃:Cr₂O₃ molar ratio 1:1 were synthesized in the temperature range of 1400–1700°C by conventional solid–oxide reaction route. The effect of different aluminas (viz., hydrated and calcined) on the densification, microstructure, and properties of Al₂O₃–Cr₂O₃ refractories was investigated without changing the Cr₂O₃ source. The starting materials were analyzed to determine the chemical composition, mineralogy, density, surface area, and particle size. Sintered materials were characterized in terms of densification, phase assemblage, and mechanical strength at room temperature and at higher temperatures. Microstructural evolution at different sintering temperature was correlated with sintering characteristics. It can be concluded that the Al₂O₃–Cr₂O₃ refractories prepared with hydrated alumina as Al₂O₃ source show better densification and hot mechanical strength than corresponding calcined variety.     

Environmental tobacco smoke removal capability of activated carbon

Removal of gaseous and vapor constituents of environmental tobacco smoke (ETS) by activated carbons in a packed bed arrangement was studied under dynamic conditions and was compared with that by silica gel and molecular sieve 13X. ETS is a mixture of sidestream smoke and exhaled mainstream smoke, and it consists of various organic and inorganic compounds, trace heavy metals, and particulate matters. Due to the complex nature of ETS-air mixture, its removal from indoors is a challenging task. For experimentation in a laboratory, the ETS was produced from a specially designed smoking apparatus that simulated the puffng of a cigarette by a person. Air containing ETS was passed through a bed containing about 25 grams of activated carbon at room temperature. The flow rate of air-ETS mixture through the bed was 4000 cm3/min. The relative humidity of the air was 50% and contained about 35 to 40 ppm of hydrocarbons as measured as methane-equivalent. The number of particles in the inlet air stream were in the range of 30,000 to 35,000 particles/cm3. About 60% of hydrocarbons present in ETS were removed at these operating conditions for a period of about 70 hours. Based on 15 adsorption and regeneration cycles, it was noted that the carbon bed did not loose its capacity for ETS significantly as indicated by the BET surface area and water adsorption data. At the beginning of an adsorption cycle, the carbon bed captured a significant number of particles. However, the bed rapidly lost its particle capture effciency as the experiment progressed. The number of particles in the outlet air stream was found to be the same as that of the inlet stream within five minutes.     

Transformation of sputtered calcium copper titanate thin film into nanorods by sequential annealing

Rapid synthesis of long calcium copper titanate (CCTO) nanorods was carried out by sequential annealing. CCTO thin films have been deposited on p-Si substrate by RF sputtering technique and afterwards, the samples were thermally treated using a preheated furnace by varying the annealing temperature from 850 °C to 1100 °C. CCTO nanorods of 12 µm lengths and 400–600 nm diameters were synthesized at 1100 °C. Based on the FESEM observations, a plausible growth mechanism has been proposed to explain the formation of nanorods. The (220) XRD peak of the CCTO film became prominent for the annealing temperature of 950 °C. The presence of nanoscale crystals in amorphous matrix has been observed by HRTEM studies. The elemental mapping of CCTO nanorod has shown a spatial variation of elements throughout the nanorod. The oxide and interface charge density was found to be increased with the rise in annealing temperature.     

Modeling of time to corrosion-induced cover cracking in reinforced concrete structures

Service life of the concrete structures depends on the protective action provided by the cover concrete against the susceptibility of the reinforcement to the corrosive environment. Depending on the level of the oxidation of metallic iron, corrosion products may have much greater volume than the original iron that gets consumed by the process of corrosion. This volume expansion is mainly responsible for exerting the expansive radial pressure at the steel-concrete interface and development of hoop tensile stresses in the surrounding concrete resulting ultimately in the through cracking of the cover concrete. This cover cracking would indicate the loss of the service life for the corrosion-affected structures. In the present paper, an attempt has been made to develop analytical models for predicting the time to cover cracking by considering the residual strength of the cracked concrete and the stiffness provided by the combination of the reinforcement and expansive corrosion products. The problem is modeled as a boundary value problem wherein the governing equations are expressed in terms of the radial displacement and the analytical solutions are presented considering a simple 2-zone model for the cover concrete viz. cracked or uncracked. The analytical models are then evaluated through their ability to reproduce available experimental trends and subsequently a sensitivity analysis has also been carried out to show the influence of the various variable parameters of the proposed models with reference to the experimental trends.     

Coalescence of bubbles and stability of foams in aqueous solutions of Tween surfactants

Coalescence of air bubbles and stability of foams in aqueous solutions of Tween 20, 40, 60 and 80 are reported in this work. Adsorption of the surfactants at air–water interface was studied by measuring the surface tension of the surfactant solutions. The surface tension profiles were fitted using a surface equation of state derived from the Gibbs and Langmuir adsorption equations. The critical micelle concentration and surface tension at this concentration were determined. The effect of surfactant concentration on coalescence of air bubbles at flat air–water interface was studied. The role of steric force on coalescence time was investigated. The coalescence time distributions were fitted by the stochastic model. The mean values of the distributions were compared with the predictions of seven film-drainage models. Stability of foams was analyzed by the Ross–Miles test. The initial and residual foam heights were measured at different surfactant concentrations. The stability of foams was compared with the coalescence time of the bubbles.