The predominance of economic development in the support for large-scale wind farms in the U.S. Great Plains

Wind energy is one of the fastest growing sources of power generation in the world. While general public and political support for wind energy is often high, siting wind farms frequently raises concerns in local communities, and individual projects often fail because of effective public opposition. This paper presents the results of a postal and online survey questionnaire that explores public perceptions of wind energy in two of the most important states for wind development, Texas and Iowa. The goal is a better understanding of public reactions to large-scale wind developments as a prerequisite of more widespread use of renewable energy resources. We found a high level of public support for wind energy, with more than two-thirds of respondents being in favor of building more wind farms either in their community or within the U.S. as a whole. Given that the majority of respondents had a very high level of concern for the general environment, we also found that almost two-thirds of respondents counter-intuitively indicated that producing electricity using fossil fuels is not detrimental to the environment, and that they had little concern for global climate change. Our results suggest that arguing for more renewable sources of energy based on reducing our carbon footprint is less persuasive in these communities than simply approaching it from the perspective of wind being a clean and safe source of energy. More than two-thirds of respondents felt their county had benefited economically from the wind farms and that they were a source of job creation in the county. Support for wind power in these communities is associated far more with socioeconomic factors than foundational aesthetic or moral values, with wind farms perceived as the vehicle that will reverse economic decline.     

Three-dimensional microstructural changes in the Ni–YSZ solid oxide fuel cell anode during operation

Microstructural evolution in solid oxide fuel cell (SOFC) cermet anodes has been investigated using X-ray nanotomography along with differential absorption imaging. SOFC anode supports composed of Ni and yttria-stabilized zirconia (YSZ) were subjected to extended operation and selected regions were imaged using a transmission X-ray microscope. X-ray nanotomography provides unique insight into microstructure changes of all three phases (Ni, YSZ, pore) in three spatial dimensions, and its relation to performance degradation. Statistically significant 3D microstructural changes were observed in the anode Ni phase over a range of operational times, including phase size growth and changes in connectivity, interfacial contact area and contiguous triple-phase boundary length. These observations support microstructural evolution correlated to SOFC performance. We find that Ni coarsening is driven by particle curvature as indicated by the dihedral angles between the Ni, YSZ and pore phases, and hypothesize that growth occurs primarily by means of diffusion and particle agglomeration constrained by a pinning mechanism related to the YSZ phase. The decrease in Ni phase size after extended periods of time may be the result of a second process connected to a mobility-induced decrease in the YSZ phase size or non-uniform curvature resulting in a net decrease in Ni phase size.     

Optimization of electron transfer dissociation via informed selection of reagents and operating parameters

Electron transfer dissociation (ETD) has improved the mass spectrometric analysis of proteins and peptides with labile post-translational modifications and larger intact masses. Here, the parameters governing the reaction rate of ETD are examined experimentally. Currently, due to reagent injection and isolation events as well as longer reaction times, ETD spectra require significantly more time to acquire than collision-induced dissociation (CID) spectra (>100 ms), resulting in a trade-off in the dynamic range of tandem MS analyses when ETD-based methods are compared to CID-based methods. Through fine adjustment of reaction parameters and the selection of reagents with optimal characteristics, we demonstrate a drastic reduction in the time taken per ETD event. In fact, ETD can be performed with optimal efficiency in nearly the same time as CID at low precursor charge state (z = +3) and becomes faster at higher charge state (z > +3).     

In situ electrokinetic enhancement for self-assembled-monolayer-based electrochemical biosensing

This study reports a multifunctional electrode approach which directly implements electrokinetic enhancement on a self-assembled-monolayer-based electrochemical sensor for point-of-care diagnostics. Using urinary tract infections as a model system, we demonstrate that electrokinetic enhancement, which involves in situ stirring and heating, can enhance the sensitivity of the strain specific 16S rRNA hybridization assay for 1 order of magnitude and accelerate the time-limiting incubation step with a 6-fold reduction in the incubation time. Since the same electrode platform is used for both electrochemical signal enhancement and electrochemical sensing, the multifunctional electrode approach provides a highly effective strategy toward fully integrated lab-on-a-chip systems for various biomedical applications.     

Simultaneous fingerprint and high-wavenumber confocal Raman spectroscopy enhances early detection of cervical precancer in vivo

Raman spectroscopy is a vibrational spectroscopic technique capable of nondestructively probing endogenous biomolecules and their changes associated with dysplastic transformation in the tissue. The main objectives of this study are (i) to develop a simultaneous fingerprint (FP) and high-wavenumber (HW) confocal Raman spectroscopy and (ii) to investigate its diagnostic utility for improving in vivo diagnosis of cervical precancer (dysplasia). We have successfully developed an integrated FP/HW confocal Raman diagnostic system with a ball-lens Raman probe for simultaneous acquistion of FP/HW Raman signals of the cervix in vivo within 1 s. A total of 476 in vivo FP/HW Raman spectra (356 normal and 120 precancer) are acquired from 44 patients at clinical colposcopy. The distinctive Raman spectral differences between normal and dysplastic cervical tissue are observed at ~854, 937, 1001, 1095, 1253, 1313, 1445, 1654, 2946, and 3400 cm(-1) mainly related to proteins, lipids, glycogen, nucleic acids and water content in tissue. Multivariate diagnostic algorithms developed based on partial least-squares-discriminant analysis (PLS-DA) together with the leave-one-patient-out, cross-validation yield the diagnostic sensitivities of 84.2%, 76.7%, and 85.0%, respectively; specificities of 78.9%, 73.3%, and 81.7%, respectively; and overall diagnostic accuracies of 80.3%, 74.2%, and 82.6%, respectively, using FP, HW, and integrated FP/HW Raman spectroscopic techniques for in vivo diagnosis of cervical precancer. Receiver operating characteristic (ROC) analysis further confirms the best performance of the integrated FP/HW confocal Raman technique, compared to FP or HW Raman spectroscopy alone. This work demonstrates, for the first time, that the simultaneous FP/HW confocal Raman spectroscopy has the potential to be a clinically powerful tool for improving early diagnosis and detection of cervical precancer in vivo during clinical colposcopic examination.     

Iron transport in cancer cell culture suspensions measured by cell magnetophoresis

Cell motion in a magnetic field reveals the presence of intracellular paramagnetic elements, such as iron or manganese. Under controlled field and liquid media composition, such motion previously allowed us to compare the paramagnetic contribution to cell magnetic susceptibility in erythrocytes differing in the spin state of heme associated with hemoglobin. The method is now tested on cells with less obvious paramagnetic properties: cell cultures derived from human cancers to determine if the magnetophoretic mobility (MM) measurement is sufficiently sensitive to the dysregulation of the intracellular iron metabolism as suggested by reports on loss of iron homeostasis in cancer. The cell lines included hepatocellular carcinoma (Hep 3B 2.1-7 and Hep G2), promyelocytic (HL-60) and chronic myelogenous (K-562) leukemias, histiocytic lymphoma (U-937), tongue (CAL 27) and pharyngeal (Detroit 562) carcinomas, and epitheloid carcinoma (HeLa), whose MM was measured in complete media with standard and elevated soluble iron (ferric nitrate and ferric ammonium citrate), against oxy- and met-hemoglobin erythrocytes used as controls. Different cell lines responded differently to the magnetic field and the soluble iron concentrations in culture media establishing the possibility of single cell elemental analysis by magnetophoresis and magnetic cell separation based upon differences in intracellular iron concentration.     

Ray matrix analysis of the fast Fresnel transform with applications towards liquid crystal displays

We reexamine a previously published algorithm for performing a fast Fresnel diffraction calculation that uses two Fourier transform operations and is computationally much faster than the conventional approach. We analyze this technique using a ray matrix analysis and find explicit expressions for the maximum and minimum distances over which this algorithm is accurate. These distances coincide with the experimental distances that are appropriate when patterns are encoded onto liquid crystal displays. We show two examples that confirm our ideas. We expect that these results will be very useful for computational comparison with experimental studies of a variety of diffraction phenomena.     

Generation of Bessel beam arrays through Dammann gratings

In this work we apply the Dammann grating concept to generate an equal-intensity square array of Bessel quasi-free diffraction beams that diverge from a common center. We generate a binary phase mask that combines the axicon phase with the phase of a Dammann grating. The procedure can be extended to include vortex spiral phases that generate an array of optical pipes. Experimental results are provided by means of a twisted nematic liquid crystal display operating as a binary π phase spatial light modulator.     

Effect of oxide shell growth on nano-aluminum thermite propagation rates

Flame propagation rates for nanometric particle composites of aluminum (Al) and molybdenum trioxide (MoO₃) were examined. The Al particles were prepared by thermally treating the particles at 480 °C for time increments up to 180 min in oxygen and 90 min in argon. This treatment caused the aluminum passivation shell to grow and there is also evidence of shell damage due to treatment. Results reveal several interesting behaviors: flame speeds initially on the order of several hundred meters per second were reduced with damage to the oxide shell, and there is a weak dependence of the flame speed on the ratio of particle radius to shell thickness (M) in the range 6.1 < M < 13.4. The sharp drop in flame rate at further reduction in M down to 5.0 is consistent with a similar drop observed for adding alumina to the reactive mixture. All observations are consistent with the melt dispersion mechanism associated with Al nanoparticle oxidation.     

Carbon coatings on silica glass optical fibers studied by reflectance Fourier-transform infrared spectroscopy and focused ion beam scanning electron microscopy

Carbon coatings applied on optical fibers via chemical vapor deposition were characterized by a resistance technique, focused ion beam/scanning electron microscopy (FIB/SEM), and reflectance Fourier-transform infrared spectroscopy (FTIR). The resistance technique measures the thickness of carbon film by measuring the resistance over a section of optical fiber, and backing out the film thickness. The FIB/SEM system was used to remove a cross section of the optical fiber and carbon coating and using a scanning transmission electron detector the thickness was measured. The FTIR approach is based on the fact that the wavelength of the light in the mid-infrared region (~ 10 μm) is significantly larger than the typical thickness of the carbon coatings (< 0.1 μm) which makes the coating “semi-transparent” to the infrared light. Carbon coating deposition results in significant transformations of the band profiles of silica in the reflectance spectra that were found to correlate with the carbon coating thickness for films ranging from 0.7 nm to 54.6 nm. The observed transformations of the reflectance spectra were explained within the framework of Fresnel reflection of light from a dual-layer sample. The advantage of this approach is a much higher spatial resolution in comparison with many other known methods and can be performed more quickly than many direct measurement techniques.