High‐Mobility n‐Type Organic Transistors Based on a Crystallized Diketopyrrolopyrrole Derivative

A new high‐performing small molecule n‐channel semiconductor based on diketopyrrolopyrrole (DPP), 2,2′‐(5,5′‐(2,5‐bis(2‐ethylhexyl)‐3,6‐dioxo‐2,3,5,6‐tetrahydropyrrolo[3,4‐c]pyrrole‐1,4‐diyl)bis(thiophene‐5,2‐diyl))bis(methan‐1‐yl‐1‐ylidene)dimalononitrile (DPP‐T‐DCV), is successfully synthesized. The frontier molecular orbitals in this designed structure are elaborately tuned by introducing a strong electron‐accepting functionality (dicyanovinyl). The well‐defined lamellar structures of the crystals display a uniform terrace step height corresponding to a molecular monolayer in the solid‐state. As a result of this tuning and the remarkable crystallinity derived from the conformational planarity, organic field‐effect transistors (OFETs) based on dense‐packed solution‐processed single‐crystals of DPP‐T‐DCV exhibit an electron mobility (μ_e) up to 0.96 cm² V^?1 s^?1, one of the highest values yet obtained for DPP derivative‐based n‐channel OFETs. Polycrystalline OFETs show promise (with an μ_e up to 0.64 cm² V^?1 s^?1) for practical utility in organic device applications.     

Three-phase unbalanced-voltage compensators

In this paper, three-phase unbalanced-voltage compensators using ac choppers are proposed. The proposed three-phase unbalanced-voltage compensators are made up of three single-phase ac choppers and transformers for unbalanced-voltage compensation and output voltage regulation. The proposed compensators use ac choppers which solve the commutation problem, limit the switch voltage stress to the maximum line voltage, and also raise efficiency using regenerative dc snubbers. Compared with previous unbalanced-voltage compensators that use complex voltage source inverters, the proposed unbalanced-voltage compensators use ac choppers and utilize source or output line voltages in 30° phase shift with the phase voltages as the input of the ac chopper. Then, the proposed compensators give high efficiency, fast dynamics, simple power circuit, and reduced control circuit. It is also shown via some simulation and experimental results that the presented unbalanced-voltage compensators give good dynamic and steady state performances.     

An MRAC-based nonlinear speed control of an interior PM synchronous motor with improved maximum torque operation

A model reference adaptive control (MRAC)-based nonlinear speed control strategy of an interior permanent magnet (IPM) synchronous motor with an improved maximum torque operation is presented. In most servo systems, the controller is designed under the assumption that the electrical dynamics are neglected by the field-oriented control. This requires a high-performance inner-loop current control strategy. However, the separate designs for a high-performance current regulator and a robust speed controller need considerable effort. To overcome this limitation, an MRAC-based nonlinear speed control strategy for the IPM synchronous motor is presented, considering the whole nonlinear dynamics. Nonlinear speed control is achieved by an input–output linearization scheme. This scheme, however, gives an unsatisfactory performance under the mismatch of the system parameters and load conditions. For the robust output response, the controller parameters are estimated by an MRAC technique in which the disturbance torque and flux linkage are estimated. The adaptation laws are derived from Lyapunov stability theory. In view of the drive efficiency, the motor has to provide the maximum torque for a given input. To drive the IPM synchronous motor under improved maximum torque operation, the estimated flux linkage is employed for the generation of the d-axis current command. The robustness and output performance of the proposed control scheme are verified through simulation results.     

Work‐Function Engineering of Graphene Anode by Bis(trifluoromethanesulfonyl)amide Doping for Efficient Polymer Light‐Emitting Diodes

Graphene has been considered to be a potential alternative transparent and flexible electrode for replacing commercially available indium tin oxide (ITO) anode. However, the relatively high sheet resistance and low work function of graphene compared with ITO limit the application of graphene as an anode for organic or polymer light‐emitting diodes (OLEDs or PLEDs). Here, flexible PLEDs made by using bis(trifluoromethanesulfonyl)amide (TFSA, [CF₃SO₂]₂NH) doped graphene anodes are demonstrated to have low sheet resistance and high work function. The graphene is easily doped with TFSA by means of a simple spin‐coating process. After TFSA doping, the sheet resistance of the TFSA‐doped five‐layer graphene, with optical transmittance of ≈88%, is as low as ≈90 Ω sq^?1. The maximum current efficiency and power efficiency of the PLED fabricated on the TFSA‐doped graphene anode are 9.6 cd A^?1 and 10.5 lm W^?1, respectively; these values are markedly higher than those of the PLED fabricated on pristine graphene anode and comparable to those of an ITO anode.     

Architectural Design Issues in a Clockless 32‐Bit Processor Using an Asynchronous HDL

As technology evolves into the deep submicron level, synchronous circuit designs based on a single global clock have incurred problems in such areas as timing closure and power consumption. An asynchronous circuit design methodology is one of the strong candidates to solve such problems. To verify the feasibility and efficiency of a large‐scale asynchronous circuit, we design a fully clockless 32‐bit processor. We model the processor using an asynchronous HDL and synthesize it using a tool specialized for asynchronous circuits with a top‐down design approach. In this paper, two microarchitectures, basic and enhanced, are explored. The results from a pre‐layout simulation utilizing 0.13‐μm CMOS technology show that the performance and power consumption of the enhanced microarchitecture are respectively improved by 109% and 30% with respect to the basic architecture. Furthermore, the measured power efficiency is about 238 μW/MHz and is comparable to that of a synchronous counterpart.     

Analysis of Failure in Miniature X‐ray Tubes with Gated Carbon Nanotube Field Emitters

We correlate the failure in miniature X‐ray tubes with the field emission gate leakage current of gated carbon nanotube emitters. The miniature X‐ray tube, even with a small gate leakage current, exhibits an induced voltage on the gate electrode by the anode bias voltage, resulting in a very unstable operation and finally a failure. The induced gate voltage is apparently caused by charging at the insulating spacer of the miniature X‐ray tube through the gate leakage current of the field emission. The gate leakage current could be a criterion for the successful fabrication of miniature X‐ray tubes.     

Mobile Oriented Future Internet (MOFI):Architectural Design and Implementations

With the recent growth in smartphone services, the “mobile” environment has become a key factor to consider in the design of the future Internet. In this paper, we propose Mobile‐Oriented Future Internet (MOFI), which is a new architecture for the future Internet for mobile‐oriented environments. The MOFI architecture is designed with three functional features: global identifier and local locator in the identifier‐locator separation, query‐first data delivery for route optimization, and distributed control of identifier‐locator mapping. The proposed architecture and functional operations are implemented and tested using the Linux platform. From the experiment results, we see that the MOFI architecture performs better than the existing identifier‐locator separation schemes, such as Proxy Mobile IP and Host Identity Protocol, in terms of data throughout, mapping control overhead, and handover delay.