Preferentially oriented BaTiO3 thin films deposited on silicon with thin intermediate buffer layers

Barium titanate (BaTiO₃) thin films are prepared by conventional 2-methoxy ethanol-based chemical solution deposition. We report highly c-axis-oriented BaTiO₃ thin films grown on silicon substrates, coated with a lanthanum oxynitrate buffer layer of 8.9 nm. The influence of the intermediate buffer layer on the crystallization of BaTiO₃ film is investigated. The annealing temperature and buffer layer sintering conditions are optimized to obtain good crystal growth. X-ray diffraction measurements show the growth of highly oriented BaTiO₃ thin films having a single perovskite phase with tetragonal geometry. The scanning electron microscopy and atomic force microscopy studies indicate the presence of smooth, crack-free, uniform layers, with densely packed crystal grains on the silicon surface. A BaTiO₃ film of 150-nm thickness, deposited on a buffer layer of 7.2 nm, shows a dielectric constant of 270, remnant polarization (2P_r) of 5 μC/cm², and coercive field (E_c) of 60 kV/cm.     

Proton beam writing and electroplating for the fabrication of high aspect ratio Au microstructures

We present an approach to fabricate tall high aspect ratio Au microstructures by means of proton beam direct writing. Combining proton beam direct writing and electroplating, we successfully produced gold structures with sub-micrometer lateral dimensions, structure heights in excess of 11 μm, and aspect ratios over 28. Sidewall quality of the Au structures was improved by lowering the process temperature to 20 °C when developing PMMA patterns with GG developer. The application of such structures as X-ray masks for deep X-ray lithography with synchrotron radiation was demonstrated.     

Sequential enzymatic quantification of two sugars in a single microchannel

This paper presents the implementation of a multiple analyte enzyme assay, based on the sequential injection of the different enzyme solutions, in an electrokinetic driven microfluidic chip. The assay methodology for the simultaneous quantification of d-glucose and d-fructose was reported in previous publications but here the real integration of both enzyme assays was achieved. When assays were executed separately, good reproducibility was observed with average CV values of 5.2% and 4.5% for the d-glucose and d-fructose assay, respectively. Next, the assays for the quantification of d-glucose and d-fructose were integrated simultaneously on chip, where each assay was executed consecutively in the same microreactor by applying a specific sequence of potentials at the reservoirs. This article proves the integration of a sequential based quantification approach in continuous microfluidic chips with electrokinetic actuation.     

Long-term priming of neighbours biases the word recognition process: Evidence from a lexical decision task.

The role of orthographically similar words (i.e., neighbours) in the word recognition process has been studied extensively using short-term priming paradigms (e.g., Colombo, 1986). Here we demonstrate that long-term effects of neighbour priming can also be obtained. Experiment 1 showed that prior study of a neighbour (e.g., TANGO) increased later lexical decision performance for similar words (e.g., MANGO), but decreased performance for similar pseudowords (e.g., LANGO). Experiment 2 replicated this bias effect and showed that the increase in lexical decision performance due to neighbour priming is selectively due to words from a relatively sparse neighbourhood. Explanations of the bias effect in terms of lexical activation and episodic memory retrieval are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Virtual Private Ad Hoc Networking

The fact that a lot of applications require secure communication to take place only between a dynamic subset of distributed devices sharing a common context, is, from a network point of view, very challenging and demanding. Existing technologies such as VPN, P2P overlays or VLANs can only partially respond to these requirements. This observation is the key factor that has driven the proposal of the virtual private ad hoc network concept. Virtual private ad hoc networks (VPAN) are secure and self-organizing overlay networks on top of existing IP infrastructure that use ad hoc networking techniques to enable network connectivity. The underlying IP infrastructure can be the Internet, cellular networks, ad hoc networks, mesh networks … or combinations thereof. A virtual private ad hoc overlay network creates a transparent, shielded and trusted environment for the applications and services running on the participants' devices. The overlay uses internal addressing and ad hoc routing, thereby forming a virtual network on top of the physical infrastructure. In addition, the overlay must be self-organizing and self-maintaining upon member mobility or membership changes. This paper gives an overview of the potential applications, a high-level network architecture and the network challenges emerging from the novel concept of virtual private ad hoc networking. Jeroen Hoebeke was born in Ghent, Belgium in 1979. In 2002 he received the Masters degree in engineering (Computer Science) from the University of Ghent. In August 2002, he joined the Broadband Communications Networks Group. His PhD research includes the development of adaptive routing protocol techniques for mobile ad hoc networks. His main research interests are in ad hoc wireless communications and, more generally, in broadband wireless communications. Within the European MAGNET project, he is actively involved in the development of a network architecture and demonstrator for Personal Networks, with a prime focus on routing and connectivity. Gerry Holderbeke was born in Zottegem, Belgium in 1982. He graduated in Informatics at the University of Ghent in 2004. In August 2004 he joined the Broadband Communications Networks Group where he is currently working as a project developer. His research currently includes the development of an emulator for mobile ad hoc networks. His main research interests are in ad hoc networks and broadband wireless communications and involve routing, addressing and more generally, communication within mobile ad hoc networks and infrastructured networks. Within the European MAGNET project, he is actively involved in the development of a network architecture for Personal Networks, with a prime focus on the implementation of the routing architecture. Ingrid Moerman was born in Gent, Belgium in 1965. She received the degree in Electro-technical Engineering and the Ph.D degree from the Ghent University, Gent, Belgium in 1987 and 1992, respectively. Since 1987, she has been with the Interuniversity Micro-Electronics Centre (IMEC) at the Department of Information Technology (INTEC) of the Ghent University, where she conducted research in the field of optoelectronics. In 1997, she became a permanent member of the Research Staff at IMEC. Since 2000 she is part-time professor at the Ghent University. Since 2001 she has switched her research domain to broadband communication networks. She is currently involved in the research and education on broadband mobile & wireless communication networks and on multimedia over IP. The main research topics related to mobile & wireless communication networks are: wireless access to vehicles (high bandwidth & driving speed), adaptive QoS routing in wireless ad hoc networks, body area networks, protocol boosting on wireless links, design of fixed access/metro part, traffic engineering and QoS support in the wireless access network. Ingrid Moerman is author or co-author of more than 300 publications in the field of optoelectronics and communication networks. Bart Dhoedt received a degree in Engineering from the Ghent University in 1990. In September 1990, he joined the Department of Information Technology of the Faculty of Applied Sciences, University of Ghent. His research, addressing the use of micro-optics to realize parallel free space optical interconnects, resulted in a PhD degree in 1995. After a 2 year post-doc in opto-electronics, he became professor at the Faculty of Applied Sciences, Department of Information Technology. Since then, he is responsible for several courses on algorithms, programming and software development. His research interests are software engineering and mobile & wireless communications. Bart Dhoedt is author or co-author of approximately 70 papers published in international journals or in the proceedings of international conferences. His current research addresses software technologies for communication networks, peer-to-peer networks, mobile networks and active networks. Piet Demeester received the Masters degree in Electro-technical engineering and the Ph.D degree from the Ghent University, Gent, Belgium in 1984 and 1988, respectively. In 1992 he started a new research activity on broadband communication networks resulting in the IBCN-group (INTEC Broadband communications network research group). Since 1993 he became professor at the Ghent University where he is responsible for the research and education on communication networks. The research activities cover various communication networks (IP, ATM, SDH, WDM, access, active, mobile), including network planning, network and service management, telecom software, internetworking, network protocols for QoS support, etc. Piet Demeester is author of more than 300 publications in the area of network design, optimization and management. He is member of the editorial board of several international journals and has been member of several technical program committees (ECOC, OFC, DRCN, ICCCN, IZS, &).     

Importance and reduction of the sidewall-induced band-broadening effect in pressure-driven microfabricated columns

The influence of the detailed design of the sidewall region upon the over-all band-broadening in microfabricated packed-bed or collocated monolithic support structure (COMOSS) columns has been investigated using computational fluid dynamics (CFD) simulation techniques. It is shown that, under unretained solute conditions, very small structural variations of the order of only 5% of the particle diameter can give rise to a 4-fold increase of the band-broadening. A comprehensive study has been made to quantify this effect as a function of the fluid velocity, the particle diameter, the channel widths, and of course, the sidewall region design. Because the sidewall effect can be fully attributed to a mismatch between the flow rates in the column center and in the sidewall region, it is fortunately also quite straightforward to avoid it. A very simple design, yielding band-broadening values identical to that of a hypothetical sidewall-less column for all possible values of the flow velocity, the particle diameter, or the channel width is proposed.     

In vivo measurement of the brain and skull resistivities using an EIT-based method and realistic models for the head

In vivo measurements of equivalent resistivities of skull (rho(skull)) and brain (rho(brain)) are performed for six subjects using an electric impedance tomography (EIT)-based method and realistic models for the head. The classical boundary element method (BEM) formulation for EIT is very time consuming. However, the application of the Sherman-Morrison formula reduces the computation time by a factor of 5. Using an optimal point distribution in the BEM model to optimize its accuracy, decreasing systematic errors of numerical origin, is important because cost functions are shallow. Results demonstrate that rho(skull)/rho(brain) is more likely to be within 20 and 50 rather than equal to the commonly accepted value of 80. The variation in rho(brain)(average = 301 omega x cm, SD = 13%) and rho(skull)(average = 12230 omega x cm, SD = 18%) is decreased by half, when compared with the results using the sphere model, showing that the correction for geometry errors is essential to obtain realistic estimations. However, a factor of 2.4 may still exist between values of rho(skull)/rho(brain) corresponding to different subjects. Earlier results show the necessity of calibrating rho(brain) and rho(skull) by measuring them in vivo for each subject, in order to decrease errors associated with the electroencephalogram inverse problem. We show that the proposed method is suited to this goal.     

Uncertainties in the fate of nitrogen I: An overview of sources of uncertainty illustrated with a Dutch case study

This study focuses on the uncertainties in the fate of nitrogen (N) in the Netherlands. Nitrogen inputs into the Netherlands in products, by rivers, and by atmospheric deposition, and microbial and industrial fixation of atmospheric N₂ amount to about 4450 Gg N y^–1. About 60% of this N is transported out of the Netherlands in products. The fate of the remaining 40%, however, is less clear. We discuss uncertainties in losses to the atmosphere (as ammonia or through denitrification), by leaching and runoff, and in N accumulation in biomass and soils. These processes may account for the fate of about 40% of the N in the Netherlands, and for the fate of about 60% of the N in Dutch agricultural soils. Reducing uncertainties in the estimates of these fluxes is necessary for reducing the impact of excess N in the environment. In particular, monitoring the environmental effects of ammonia emissions and nitrate leaching to groundwater and aquatic systems requires an increased understanding of the fate of N. Uncertainties arise because (1) some N fluxes cannot be measured directly and are usually quantified indirectly as the balance in N budgets, (2) direct measurements of N fluxes have inevitable inaccuracies, (3) lack of experimental data and other information (e.g. statistics) needed for upscaling, (4) large spatial and temporal variability of fluxes, and (5) poor understanding of the processes involved. These uncertainties can be reduced by additional experimental studies and by further development of process-based models and N budget studies. We prioritize these future research needs according to a range of different criteria.     

Visualization of participation: Does it contribute to successful computer-supported collaborative learning?

This study investigated the effects of visualization of participation during computer-supported collaborative learning (CSCL). It is hypothesized that visualization of participation could contribute to successful CSCL. A CSCL-environment was augmented with the Participation Tool (PT). The PT visualizes how much each group member contributes to his or her group’s online communication. Using a posttest-only design with a treatment (N = 52) and a control group (N = 17), it was examined whether students with access to the PT participated more and more equally during collaboration, reported higher awareness of group processes and activities, collaborated differently, and performed better than students without access to the PT. The results show that students used the PT quite intensively. Furthermore, compared to control group students, treatment group students participated more and engaged more in coordination and regulation of social activities during collaboration by sending more statements that addressed the planning of social activities. However, equality of participation, awareness of group processes and quality of the group products was not higher in the treatment condition. Still, the results of this study demonstrate that visualization of participation can contribute to successful CSCL.     

A meta-analysis of the technology acceptance model: Investigating subjective norm and moderation effects

We conducted a quantitative meta-analysis of previous research on the technology acceptance model (TAM) in an attempt to make well-grounded statements on the role of subjective norm. Furthermore, we compared TAM results by taking into account moderating effects of one individual-related factor (type of respondents), one technology-related factor (type of technology), and one contingent factor (culture). Results indicated a significant influence of subjective norm on perceived usefulness and behavioral intention to use. Moderating effects were found for all three factors. The findings yielded managerial implications for both intra-company and market-based settings.