Gravel deposits survey in south central Brazil

This paper deals with the influence of discontinuous particle-size distribution on the basic properties of asphaltic concrete. New particle-size curves were obtained by removing the fine, medium and coarse material connected with one or two successive sieves. Consequently the following characteristics have been examined: stability, deformation and voids of compacted asphaltic concrete according to the Greek specifications. The results showed that a high degree of flexibility capable of removing part of the aggregate exists. In that case the values of tests present positive or negative results which are also influenced by the existing proportion of bitumen. Thus a revision of specifications concerned with particle-size distribution might be possible.     

Chromatographic Fingerprinting with Multivariate Data Analysis for Detection and Quantification of Apricot Kernel in Almond Powder

Adulteration of almond powder samples with apricot kernel was solved by gas chromatographic fatty acid fingerprinting combined with multivariate data analysis methods (principal component analysis (PCA), PCA-linear discriminant analysis (PCA-LDA), partial least squares (PLS), and LS support vector machine (LS-SVM). Different almond and apricot kernel samples were mixed at concentrations ranging from 10 to 90% w/w. PCA and PCA-LDA methods were applied for the classification of almonds, apricot kernels, and mixtures. PLS and LS-SVM were used for the quantification of adulteration ratios of almond. Models were developed using a training data set and evaluated using a validation data set. The root mean square error of prediction (RMSEP) and coefficient of determination (R ²) of validation data set obtained for PLS and LS-SVM were 5.01, 0.964 and 2.29, 0.995, respectively. The results showed that the methods can be applied as an effective and feasible method for testing almond adulteration.     

Comparative study by computed radiography,histology, and scanning electron microscopy of the articular cartilage of normal goats and in chronic infection with caprine arthritis‐encephalitis virus

In the northeast of Brazil, caprine arthritis‐encephalitis (CAE) is one of the key reasons for herd productivity decreasing that result in considerable economic losses. A comparative study was carried out using computed radiography (CR), histological analysis (HA), and scanning electronic microscopy (SEM) of the joints of CAE infected and normal goats. Humerus head surface of positive animals presented reduced joint space, increased bone density, and signs of degenerative joint disease (DJD). The carpal joint presented no morphological alterations in CR in any of the animals studied. Tarsus joint was the most affected, characterized by severe DJD, absence of joint space, increased periarticular soft tissue density, edema, and bone sclerosis. Histological analysis showed chronic tissue lesions, complete loss of the surface zone, absence of proteoglycans in the transition and radial zones and destruction of the cartilage surface in the CAE positive animals. Analysis by SEM showed ulcerated lesions with irregular and folded patterns on the joint surface that distinguished the limits between areas of normal and affected cartilage. The morphological study of the joints of normal and CAE positive goats deepened understanding of the alteration in the tissue bioarchitecture of the most affected joints. The SEM finding sustained previous histological reports, similar to those found for rheumatoid arthritis, suggesting that the goat infected with CAE can be considered as a potential model for research in this area. Microsc. Res. Tech. 77:11–16, 2014. © 2013 Wiley Periodicals, Inc.     

Precession electron diffraction‐assisted crystal phase mapping of metastable c‐GaN films grown on (001) GaAs

The control growth of the cubic meta‐stable nitride phase is a challenge because of the crystalline nature of the nitrides to grow in the hexagonal phase, and accurately identifying the phases and crystal orientations in local areas of the nitride semiconductor films is important for device applications. In this study, we obtained phase and orientation maps of a metastable cubic GaN thin film using precession electron diffraction (PED) under scanning mode with a point‐to‐point 1 nm probe size beam. The phase maps revealed a cubic GaN thin film with hexagonal GaN inclusions of columnar shape. The orientation maps showed that the inclusions have nucleation sites at the cubic GaN {111} facets. Different growth orientations of the inclusions were observed due to the possibility of the hexagonal {0001} plane to grow on any different {111} cubic facet. However, the generation of the hexagonal GaN inclusions is not always due to a 60° rotation of a {111} plane. These findings show the advantage of using PED along with phase and orientation mapping, and the analysis can be extended to differently composed semiconductor thin films. Microsc. Res. Tech. 77:980–985, 2014. © 2014 Wiley Periodicals, Inc.     

Classification of Brazilian honeys by physical and chemical analytical methods and low field nuclear magnetic resonance (LF H NMR)

This study evaluated the possibility of differentiating the botanical origin of honeys using Low Field Nuclear Magnetic Resonance (LF ¹H NMR). Eighty samples of honey from 8 different botanical sources (eucalyptus, “assa-lipto”, oranges, Barbados cherry, cashew tree, “assa-peixe”, “cipó-uva” and polyfloral) were analyzed. A close correlation (p < 0.01) was established between the LF ¹H NMR analysis and physical and chemical measurements, including water content, water activity, pH and color. Bi-exponential fitting of the transverse relaxation (T₂) data revealed two water populations in all samples, T₂₁ and T₂₂, corresponding to relaxation times of 0.6–1.8 ms and 2.3–5.4 ms respectively. The observed differences in the relaxation times suggest that these were influenced by the differences in botanical origins. Good linear correlations were observed between the T₂ and T₂₁ parameters and the physical and chemical data. This study demonstrated that LF ¹H NMR can be a viable technique for use in classifying honeys by their botanical origin.     

Screening risk assessment tools for assessing the environmental impact in an abandoned pyritic mine in Spain

This paper describes a new methodology for assessing site-specific environmental impact of contaminants. The proposed method integrates traditional risk assessment approaches with real and variable environmental characteristics at a local scale. Environmental impact on selected receptors was classified for each environmental compartment into 5 categories derived from the whole (chronic and acute) risk assessment using 8 risk levels. Risk levels were established according to three hazard quotients (HQs) which represented the ratio of exposure to acute and chronic toxicity values. This tool allowed integrating in only one impact category all the elements involved in the standard risk assessment.The methodology was applied to an abandoned metal mine in Spain, where high levels of As, Cd, Zn and Cu were detected. Risk affecting potential receptors such as aquatic and soil organisms and terrestrial vertebrates were assessed. Whole results showed that impact to the ecosystem is likely high and further investigation or remedial actions are necessary. Some proposals to refine the risk assessment for a more realistic diagnostic are included.     

Methodology for the reduction of parameters in the inverse transformation of Schwarz–Christoffel applied to electromagnetic devices with axial geometry

This paper presents a method for calculating the parameters of the Schwarz–Christoffel inverse transformation using the Genetic Algorithm. It is shown that for problems involving a polygonal geometry with axial symmetry, the number of estimated parameters is reduced by half. Simulations are performed with polygonal figures with several different geometries and with up to 27 sides. A four‐sided polygon is inversely mapped in order to verify the accuracy of the method. The method is also applied for calculating the induction lines and the flux lines in the region of a doubly slotted airgap of an electrical machine. Finally, based on the length of the midline of induction in the airgap, a new and very simple formula to calculate the Carter factor of an electrical machine is presented, which takes into account the actual geometry of the airgap. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigation of the pH effect and UV radiation on kinetic degradation of anthocyanin mixtures extracted from Hibiscus acetosella

The major anthocyanin pigments extracted from Hibiscus acetosella flower were investigated by UV–Vis spectroscopy and multivariate curve resolution-alternating least squares (MCR-ALS). Pure spectra and kinetic of the species present at different pH values were recovered for anthocyanins transformation and degradation products, found with and without UV radiation exposure. In the absence of UV radiation, up to seven different species were detected and by UV radiation exposure, this number increased to up to nine. The species detected in the absence of radiation were also detected when pigments samples were exposed to UV radiation, where degradation occurred faster and two new species appear. The kinetic profiles obtained at different pH values allowed the proposal of a reaction mechanism and pathway.     

Simultaneous determination of aspartame,cyclamate, saccharin and acesulfame-K in soft drinks and tabletop sweetener formulations by capillary electrophoresis with capacitively coupled contactless conductivity detection

Capillary electrophoresis (CE) with capacitively coupled contactless conductivity detection (C⁴D) was used for simple, rapid, and simultaneous determination of aspartame, cyclamate, saccharin and acesulfame-K in commercial samples of soft drinks and tabletop sweetener formulations. A buffer solution containing 100 mmol L⁻¹ tris(hydroxymethyl)aminomethane (TRIS) and 10 mmol L⁻¹ histidine (His) was used as background electrolyte (BGE). A complete separation of the analytes could be attained in less than 6 min. The limits of detection (LOD) and quantification (LOQ) were considered better than those usually obtained by CE with photometric detection. Recoveries ranging from 94% to 108% were obtained for samples spiked with standard solutions of the sweeteners. The relative standard deviation (RSD) for the analysis of the samples with the CE-C⁴D method varied in the range of 1.5%–6.5%.