Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

ESMRMB 2017, 34th Annual Scientific Meeting,Barcelona, ES,October 19–October 21: Abstracts,Thursday

Objective

Current magnetic resonance imaging (MRI) axon diameter measurements rely on the pulsed gradient spin-echo sequence, which is unable to provide diffusion times short enough to measure small axon diameters. This study combines the AxCaliber axon diameter fitting method with data generated from Monte Carlo simulations of oscillating gradient spin-echo sequences (OGSE) to infer micron-sized axon diameters, in order to determine the feasibility of using MRI to infer smaller axon diameters in brain tissue.

Materials and methods

Monte Carlo computer simulation data were synthesized from tissue geometries of cylinders of different diameters using a range of gradient frequencies in the cosine OGSE sequence . Data were fitted to the AxCaliber method modified to allow the new pulse sequence. Intra- and extra-axonal water were studied separately and together.

Results

The simulations revealed the extra-axonal model to be problematic. Rather than change the model, we found that restricting the range of gradient frequencies such that the measured apparent diffusion coefficient was constant over that range resulted in more accurate fitted diameters. Thus a careful selection of frequency ranges is needed for the AxCaliber method to correctly model extra-axonal water, or adaptations to the method are needed. This restriction helped reduce the necessary gradient strengths for measurements that could be performed with parameters feasible for a Bruker BG6 gradient set. For these experiments, the simulations inferred diameters as small as 0.5 μm on square-packed and randomly packed cylinders. The accuracy of the inferred diameters was found to be dependent on the signal-to-noise ratio (SNR), with smaller diameters more affected by noise, although all diameter distributions were distinguishable from one another for all SNRs tested.

Conclusion

The results of this study indicate the feasibility of using MRI with OGSE on preclinical scanners to infer small axon diameters.

     

Fitting interrelated datasets: metabolite diffusion and general lineshapes

Objective

Simultaneous modeling of true 2-D spectroscopy data, or more generally, interrelated spectral datasets has been described previously and is useful for quantitative magnetic resonance spectroscopy applications. In this study, a combined method of reference-lineshape enhanced model fitting and two-dimensional prior-knowledge fitting for the case of diffusion weighted MR spectroscopy is presented.

Materials and methods

Time-dependent field distortions determined from a water reference are applied to the spectral bases used in linear-combination modeling of interrelated spectra. This was implemented together with a simultaneous spectral and diffusion model fitting in the previously described Fitting Tool for Arrays of Interrelated Datasets (FiTAID), where prior knowledge conditions and restraints can be enforced in two dimensions.

Results

The benefit in terms of increased accuracy and precision of parameters is illustrated with examples from Monte Carlo simulations, in vitro and in vivo human brain scans for one- and two-dimensional datasets from 2-D separation, inversion recovery and diffusion-weighted spectroscopy (DWS). For DWS, it was found that acquisitions could be substantially shortened.

Conclusion

It is shown that inclusion of a measured lineshape into modeling of interrelated MR spectra is beneficial and can be combined also with simultaneous spectral and diffusion modeling.

     

Sensitive magnetic field sensor using 2D magnetic photonic crystal slab waveguide based on BIG/GGG structure

A kind of magnetic field sensor (MFS) using a two-dimensional (2D) magnetic photonic crystal (MPC) slab waveguide as the sensing structure is proposed and investigated numerically. The slab structure is based on bismuth iron garnet (BIG), a well-known magnetic material with effective magnetooptical (MO) properties, sandwiched with gadolinium gallium garnet (GGG) as substrate. The complete photonic bandgap (PBG) of the 2D MPC is simulated and optimized for realization of polarization-independent waveguides. The simulation results show that the width and position of the complete PBG depend on the thickness of the BIG slab and the radius of the air holes used in the design. By reducing the lightwave propagation losses and enhancing the mode conversion ratio, increased sensitivity is obtained. Based on the Faraday effect, a good linear relationship is observed between the normalized output light intensity and the magnetic field strength as the gyrotropy parameter g is varied from 0.13 to 0.19, a g-range used as the sensor dynamic range. The remarkable enhancement in sensing performance due to the MO effect makes the designed device suitable for magnetic field sensing. The results are discussed to provide a basis for investigation of 2D MPC slab waveguides based on the same structure, which are of particular interest for development of highly sensitive MFSs.     

氧输送管路动态水试仿真分析

利用AMESim软件针对某型运载火箭氧输送管水试试验进行仿真分析,建立无蓄压器和带蓄压器试验系统仿真模型,模拟试验过程中的主要压力变化,并利用软件自带的FFT变换(快速傅立叶变换)获取管路在与水介质耦合作用下的一阶频率和二阶频率。通过对比分析发现,仿真结果与试验结果比较吻合,验证了仿真模型的有效性。     

盾构施工中隧道地层位移与土压力研究

分析了盾构壁后注浆体固化过程的力学性质,阐述了有限元分析法模拟盾尾注浆体的处理方法,对有限元分析法结果进行了分析。     

A New Strategy for Preparation of NiAl Bronze/Zn Composite by Friction Stir Processing

In this work, we successfully prepared a NAB/Zn composite using Zn wires by friction stir processing (FSP). During FSP, Zn-containing α matrix and (Fe, Ni)Al phases and nano α and CuZn grains with the size of less than 10 nm are formed on the top surface. The average microhardness of the composite is increased by 15 pct compared with the alloy without Zn, which originates from fine grains, CuZn particles strengthening, and more β′ phase.

     

Plastic Deformation Resistance of Steel Grades EP450-Sh and EP823-Sh in Hot and Cold State

Metallurgist - The article presents the results of plastometric studies on hot deformation and studies on the hardening curves in cold deformation of EP450-Sh (12H12M1BFR-Sh) and EP823-Sh...     

数据融合技术在变压器状态评估中的应用

电力变压器是电力系统及变电站的最至关重要的设备之一。对电力系统进行运行维护时,监测并预报变压器运行状态并且能够有效地监测并判断变压器的故障情况具有非常现实的意义。基于设备状态信息融合技术,分析了D-S证据理论的基本原理、组合规则和决策过程。通过具体的实例论述了诊断方法的具体可行性,比较了单一诊断方法(只经神经网络判断的结果)与信息融合技术的正确率,并指出信息融合技术的发展优势和可实现性。     

Ensuring Strength in Laser Welds Made Using the Dispersion-Hardened EP693 Nickel Alloy

Russian Journal of Non-Ferrous Metals - The process of making a weld using the heat-resistant EP693 alloy (Ni–Cr–W–Co–Co–Mo system) to make assemblies and components...