Automatic inspection of the width and gap of etching transistors in TFT-LCD panels using sub-pixel accuracy estimation

In this paper, the width and gap of etching transistors in TFT-LCD panels were measured using sub-pixel accuracy estimation, and the accuracy was tested in a noisy environment. The concept of line width measurement was introduced in terms of line distance and defect measurement based on the low and high spatial frequency distribution change of TFT-LCD panel image. Some patterns do not need to have the line width and distance measured, while others have different measurement requirements. The conductor border of a pattern is normally an area with a flat change of grey scale, but we are still able to find an accurate measurement with the proposed method. In the TFT-LCD testing pattern, there are circular etching structures, and for measurement we focus on the position of the center of the circle and the size of the radius. This method can be used quickly and accurately for measuring the TFT short, ITO open, marking, spot particle or scratching on the panel caused by over etching.     

Real-time photorefractive interferometer for dynamic phase perturbation by self-interference in LiNbO(3)

We propose a simple real-time system and demonstrate its use for measuring dynamic optical phase perturbation. In this system we used a 0.1-wt. % Fe:LiNbO(3) to record the self-interference grating with incident light. The system is a new kind of real-time holographic interferometer. After rise time in the interferometer, the speed for showing the fringes is as fast as that of dynamic phase perturbations. Characteristics of the interferometer are proposed and examined.     

Polymer nanocomposites based on transition metal ion modified organoclays

A unique class of nanocomposites containing organoclays modified with catalytically active transition metal ions (TMI) and ethylene vinyl acetate (EVA) copolymers was prepared. The morphology, thermal and rheological properties of these nanocomposites were studied by thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), extended X-ray absorption fine structure (EXAFS) spectroscopy, X-ray scattering/diffraction and oscillatory shear rheometry. TMI-modified organoclays were thought to possess pillaring of multivalent TMI in the interlayer silicate gallery, leading to a notable reduction of the interlayer d-spacing. The resulting nanocomposites exhibited significantly improved thermal stability and fire retardation properties, but similar morphology (i.e., an intercalated-exfoliated structure) and rheological properties comparable with EVA nanocomposites containing unmodified organoclays. It appears that the compressed organic component in the TMI-modified organoclay can still facilitate the intercalation/exfoliation processes of polymer molecules, especially under extensive shearing conditions. The improved fire retardation in nanocomposites with TMI-modified organoclays can be attributed to enhanced carbonaceous char formation during combustion, i.e., charring promoted by the presence of catalytically active TMI.     

Developments and Applications of Data Deidentification Technology under Big Data

In this age characterized by rapid growth in the volume of data, data deidentification technologies have become crucial in facilitating the analysis of sensitive information. For instance, healthcare information must be processed through deidentification procedures before being passed to data analysis agencies in order to prevent any exposure of personal details that would violate privacy. As such, privacy protection issues associated with the release of data and data mining have become a popular field of study in the domain of big data. As a strict and verifiable definition of privacy, differential privacy has attracted noteworthy attention and widespread research in recent years. In this study, we analyze the advantages of differential privacy protection mechanisms in comparison to traditional deidentification data protection methods. Furthermore, we examine and analyze the basic theories of differential privacy and relevant studies regarding data release and data mining.     

Portrait Vision Fusion for Augmented Reality

Kinect(+openCV); Dynamic portrait segmentation; Skeletal tracking; Edge transparent processing; Video interactive     

Fabrication and characterization of porous Ti–7.5Mo alloy scaffolds for biomedical applications

Porous titanium and titanium alloys are promising scaffolds for bone tissue engineering, since they have the potential to provide new bone tissue ingrowth abilities and low elastic modulus to match that of natural bone. In the present study, porous Ti–7.5Mo alloy scaffolds with various porosities from 30 to 75 % were successfully prepared through a space-holder sintering method. The yield strength and elastic modulus of a Ti–7.5Mo scaffold with a porosity of 50 % are 127 MPa and 4.2 GPa, respectively, being relatively comparable to the reported mechanical properties of natural bone. In addition, the porous Ti–7.5Mo alloy exhibited improved apatite-forming abilities after pretreatment (with NaOH or NaOH + water) and subsequent immersion in simulated body fluid (SBF) at 37 °C. After soaking in an SBF solution for 21 days, a dense apatite layer covered the inner and outer surfaces of the pretreated porous Ti–7.5Mo substrates, thereby providing favorable bioactive conditions for bone bonding and growth. The preliminary cell culturing result revealed that the porous Ti–7.5Mo alloy supported cell attachment.     

Probing the viscoelastic properties of brominated isobutylene‐co‐p‐methylstyrene rubber/tackifier blends using a rubber process analyzer

The viscoelastic behavior of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber/hydrocarbon resin blends and BIMS/phenol formaldehyde resin blends was studied with the use of a rubber process analyzer. Dynamic mechanical analysis and scanning electron microscopy were used to evaluate the compatibility between the BIMS/tackifier blends. Strain sweep tests at temperature below the softening point of the tackifiers showed the formation of resin–resin networks in the incompatible BIMS/phenolic resin blends. However, resin–resin network was not prominent in the case of the compatible BIMS/hydrocarbon resin blends. Frequency sweep tests were performed at the strain amplitude within the linear region at several temperatures and the variations of shear storage modulus, G′ and complex viscosity, η* against frequency were recorded. The tackifying resins modified the viscoelastic properties of the BIMS rubber by reducing the storage modulus at lower frequency and by increasing the storage modulus at higher frequencies. However, this action was found to be highly dependent on (a) rubber‐tackifier compatibility, (b) blend proportions, and (c) test temperature. Furthermore, stress relaxation measurements of the BIMS/tackifier blends at temperature below the softening point of the tackifiers showed longer period of relaxation for the incompatible BIMS/phenolic resin blends. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Compatibility and viscoelastic properties of brominated isobutylene‐co‐p‐methylstyrene rubber/tackifier blends

Brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber has been blended with hydrocarbon resin tackifier and alkyl phenol formaldehyde resin tackifier, and the compatibility between the blend components has been systematically evaluated. Dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) studies show that BIMS rubber and hydrocarbon resin tackifier blends are compatible at all blend proportions studied. However, BIMS rubber and phenol formaldehyde resin blends exhibit very limited compatibility with each other and phase separation even at very low phenolic tackifier concentration. Morphological studies of the rubber–resin blends by scanning electron microscopy (SEM) corroborate well with the DMA and DSC results. From the DMA frequency sweep and temperature sweep studies, it is shown that the hydrocarbon resin tackifier acts as a diluent and causes a decrease in the storage modulus values (by reducing the entanglement and network density) in the rubbery plateau region. On the other hand, phenol formaldehyde resin behaves in the way similar to that of the reinforcing filler by increasing the storage modulus values (by increasing the entanglement and network density) in the rubbery plateau zone. The relaxation time estimated from the different zones of frequency sweep master curves provides information about the influence of the two tackifiers on the viscoelastic properties of the BIMS rubber in the respective zones. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Enhancing the lipolysis-stimulating activity of soy protein using limited hydrolysis with Flavourzyme and ultrafiltration

The aim of this study was to explore the lipolysis-stimulating activity of soy protein isolate (SPI) hydrolysate using 3T3-L1 adipocytes. Intracellular triglyceride residue (TR) was employed as a marker for lipolysis in cells. The lower TR represents the better lipolysis-stimulating activity. SPI was hydrolysed with Flavourzyme for 2 h to obtain the hydrolysate FH2h, which showed lipolysis-stimulating activity in adipocytes at 400–1600 ppm levels. The sequential fractionation of FH2h with 30–0.3 kDa molecular weight cut-off (MWCO) membranes in order to obtain a 1 kDa retentate resulted in further enhancement of its lipolysis-stimulating activity in the cells. The TR decreased significantly from 2.73 to 2.30 μmole/mg protein at the 400 ppm level (p < 0.05). Based on the western immunoblot and immunostaining analysis, the 1 kDa retentate promotes lipolysis by increasing phosphorylation and translocation of the hormone-sensitive lipase in 3T3-L1 adipocytes.